Micro:bit BBC v2 - WiFi Single Board Micro-Computer, BLE 5.0, OBSOLETE This version has been withdrawn from sale. Select model BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer (solectroshop.com) The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. Code B0111
Protoboard GPIO T-type Extension Board for Micro:Bit Connect this extension board to the micro: bit development board, then they can be directly connected to the breadboard. Code RA043 ✗ Out-of-Stock Price €6.20
Pro Micro 5V 16Mhz Arduino Compatible Board It has an ATMega32U4 chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can solder only the pins we need. Characteristic: - Microcontroller: ATmega32U4 - Operation: 5V - Power (max): 5-12V - Total I / O pins: 20 - PWM pins: 5 - Analog pins: 12 - Maximum current of I / O pins: 40 mA - Maximum current of pin 3.3V: 50 mA - Flash memory: 32 KB (4 KB used by the bootloader) - SRAM: 2.5 KB - EEPROM: 1 KB - Speed: 16 MHz - external interrupt - TWI / I2C, UART, SPI interfaces - Dimensions: 18x33mm - Weight: 30 grams Code B0022 Available Price €7.84
L293D STM Module Expansion Board 2 Motors - 25V/0.6A The L293D motor controller allows you to control two DC motors or one stepper motor using Arduino kits. The system allows you to adjust the direction and rotational speed of motors with a current consumption of up to 600 mA and a supply voltage from 4.5 V to 25 V. Code M0108 Available Price €3.79
Official Raspberry Pi Mouse, Red/White, Wired Official Raspberry Pi Mouse with wheel. - compatible with all Raspberry Pi products - with its comfortable ergonomic design and its colorful display, it is designed to complement official products existing. Official Raspberry Pi Mouse, Red/White, Wired features: - High quality 3 button optical mouse with scroll wheel - Ergonomic design for convenience of use - Compatible with all Raspberry Pi products - USB-A Plug and Play connector Code RA064 Last items in stock Price €8.26
7 inch TFT LCD 1024x600 for Raspberry Pi controller kit HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi. 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features: Code RA036 Available Regular price €38.01 -€4.00 Price €34.01
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €19.79
4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys High quality keyboard, with 16-key matrix.Ideal for your arduino projects, but can also be used with other microcontrollers. 4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys features: - Momentary contact- Number of push buttons: 16- Dimensions: 39mm x 43mm Code M0009 Available Price €1.23
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 ✗ Out-of-Stock Price €61.07
Smart City Kit micro:bit With the Smart City Kit you will learn more about the IoT, the software, and the possibilities of future city scenes that are able to be built through it. You will be able to build topics such as smart parking, transport network, river level monitoring... Code EL0115 ✗ Out-of-Stock Price €49.42
2x AAA 3V battery holder for Micro:bit Weight: 12.7g Box size: 62 * 25 * 10 mm Code PP037 Available Price €1.64
Micro:bit Starter Kit The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately. Code EL0107 Backorder Price €29.67
Gravity: Analog pH Sensor/Meter Kit DFRobot Gravity (SEN0161): The analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF024 Last items in stock Price €37.93
Ring:bit Car v2 Kit : DIY programming smart car for micro:bit The ELECFREAKS Ring:bit Car is a small DIY smart car powered by the BBC micro:bit. Manual installation can better exercise children's skills. The makecode graphical programming blocks allow children to learn programming from simple to complex in a fun way. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0102 Available Price €24.37
Protoboard GPIO T-type Extension Board for Micro:Bit Connect this extension board to the micro: bit development board, then they can be directly connected to the breadboard. Code RA043 ✗ Out-of-Stock Price €6.20
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5cm * 6.5cm Material: silica gel (environmental protection material) Code RA046 ✗ Out-of-Stock Price €4.13
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Last items in stock Regular price €62.77 -€6.00 Price €56.77
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €3.72
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 ✗ Out-of-Stock Price €3.72
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €3.72
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 ✗ Out-of-Stock Price €3.72
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 ✗ Out-of-Stock Price €61.07
Smart City Kit micro:bit With the Smart City Kit you will learn more about the IoT, the software, and the possibilities of future city scenes that are able to be built through it. You will be able to build topics such as smart parking, transport network, river level monitoring... Code EL0115 ✗ Out-of-Stock Price €49.42
2x AAA 3V battery holder for Micro:bit Weight: 12.7g Box size: 62 * 25 * 10 mm Code PP037 Available Price €1.64
Micro:bit Starter Kit The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately. Code EL0107 Backorder Price €29.67
Gravity: Analog pH Sensor/Meter Kit DFRobot Gravity (SEN0161): The analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF024 Last items in stock Price €37.93
Ring:bit Car v2 Kit : DIY programming smart car for micro:bit The ELECFREAKS Ring:bit Car is a small DIY smart car powered by the BBC micro:bit. Manual installation can better exercise children's skills. The makecode graphical programming blocks allow children to learn programming from simple to complex in a fun way. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0102 Available Price €24.37
Protoboard GPIO T-type Extension Board for Micro:Bit Connect this extension board to the micro: bit development board, then they can be directly connected to the breadboard. Code RA043 ✗ Out-of-Stock Price €6.20
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5cm * 6.5cm Material: silica gel (environmental protection material) Code RA046 ✗ Out-of-Stock Price €4.13
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Last items in stock Regular price €62.77 -€6.00 Price €56.77