5 Axis CNC Interface Board Stepper Driver Mach3 USB CNC Cutting Machine 5 Axis CNC Interface Board Stepper Driver Mach3 USB CNC Cutting Machine features: - Compatible with MACH3, Linux CNC (EMC2) etc. CNC parallel control software. - Designed for single axis CNC single phase stepper controller controller: M542, MA860H, 2M542, DM860 etc. - Stepper motor controller drivers 5 axis maximum support. - Wide input voltage range: 12-24V and with anti-reverse function. - USB power supply and peripheral power phase are separated to protect computer security - All signals are opto-isolated, which can protect the security of your computer. - 5 input interface to define limit, emergency stop, cutter alignment, etc. - A relay output control interface, accessed by spindle motor or air pump, water pump, etc. Code I0124 Available Price €7.84
Thermistor NTC 5.0K 5% MF52A epoxy resin coating resistor NTC thermistor - with a negative temperature coefficient, i.e. an increase in temperature causes a decrease in resistance. Thermistor NTC 5.0K 5% MF52A epoxy resin coating resistor features:Size: 3mmRated resistance: R25 = 5.0kB value 25/85 = 3950°KRated power: ‰¤ 50mWTolerance:± 5%Operating temperature: from -40°C to +125°C Tinned steel wire 25mm Code D0089 Available Price €0.40
Thermistor NTC 10.0K 5% MF52A epoxy resin coating resistor NTC thermistor - with a negative temperature coefficient, i.e. an increase in temperature causes a decrease in resistance. Thermistor NTC 10.0K 5% MF52A epoxy resin coating resistor features:Size: 3mmRated resistance: R25 = 10.0kB value 25/85 = 3950°KRated power: ‰¤ 50mWTolerance:± 5%Operating temperature: from -40°C to +125°C Tinned steel wire 25mm Code D0090 Available Price €0.40
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Available Price €147.93
Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Available Price €33.05
Vertical Liquid Level Sensor Switch Level sensor for liquids with float. The liquid level sensor acts as a switch. The state is changed by means of a magnet located on the float. It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where it is necessary to control the level of non-corrosive liquids such as water tanks, aquariums. Characteristic: - Maximum Load: 50W - Maximum Switching Voltage: 250V - Maximum Switching Current: 0.5A - Maximum charging current: 1A - Operating temperature: -10ºC to + 60ºC - Size: 58mm x 18mm Code S0043 Available Price €2.44
PLA Filament 1.75mm 1kg pacific blue colour Filament of PLA HD material, perfect for basic and fast projects that do not need excessive durability, for 3D printers. The diameter of the filament is 1.75mm. The package contains 1kg of pacific blue coloured filament Code I0708 Backorder Price €14.45
Panasonic rechargeable battery NCR18650A 3100mAh Li-ion Panasonic rechargeable battery NCR18650A 3100mAh Li-ion 3,6V. One of the most popular batteries on the market! The battery sold has no electronic protection against overcharge and deep discharge. Code PP128 Available Price €7.23
Keyestudio Microbit Starter Smart Home Kit with micro:bit board This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board. Code RA168 Available Price €85.53
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €90.83
Colorful RGB Light Halo Module for Microbit Arduino Rpi Colourful RGB Halo Light module for microbit, Arduino, Raspberry Pi. The module is equipped with 8 RGB LEDs and has three connection methods: alligator clip, DuPont cable and PH2.0 cable. Users can control it to turn into any colour by programming and achieve various lighting effects. Code RA167 Available Price €4.09
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Available Price €3.72
Micro:bit BBC v2.2 - WiFi Single Board Micro-Computer - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Price €19.79
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €12.31
Basic kit : micro:bit sensor kit for beginners With this basic kit you will help students understand the use of electric bricks from the very beginning. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors for use and no soldering is required. Code EL0100 Last items in stock Price €24.37
Robot Maqueen Plus V2 for micro:bit Maqueen Plus V2 is the latest version of the STEAM educational robot. Maqueen Plus (DFRobot MBT0021) is optimised with more expansion ports, a higher capacity power supply and a larger body and is fully compatible with peripheral components. This makes it an accessible STEAM robot teaching tool for primary and secondary school students. Code DF012 Last items in stock Price €56.60
Micro:bit IOBit Expansion board V1.0 IOBIT expansion board for the micro:bit minicomputer. Allows connection to all minicomputer outputs via a pin strip. Code RA135 Available Regular price €5.78 -€1.50 Price €4.28
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €21.90 -€2.00 Price €19.90
Acrylic box for BBC micro: bit Weight: 12.5g Box size: 65 * 32 * 14mm Code RA047 Available Regular price €2.44 -€0.50 Price €1.94
Micro:bit BBC v2.2 - WiFi Single Board Micro-Computer - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Price €19.79
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €3.72
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Available Price €3.72
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 Available Price €3.72
Keyestudio Microbit Starter Smart Home Kit with micro:bit board This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board. Code RA168 Available Price €85.53
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €90.83
Colorful RGB Light Halo Module for Microbit Arduino Rpi Colourful RGB Halo Light module for microbit, Arduino, Raspberry Pi. The module is equipped with 8 RGB LEDs and has three connection methods: alligator clip, DuPont cable and PH2.0 cable. Users can control it to turn into any colour by programming and achieve various lighting effects. Code RA167 Available Price €4.09
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Available Price €3.72
Micro:bit BBC v2.2 - WiFi Single Board Micro-Computer - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Price €19.79
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €12.31
Basic kit : micro:bit sensor kit for beginners With this basic kit you will help students understand the use of electric bricks from the very beginning. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors for use and no soldering is required. Code EL0100 Last items in stock Price €24.37
Robot Maqueen Plus V2 for micro:bit Maqueen Plus V2 is the latest version of the STEAM educational robot. Maqueen Plus (DFRobot MBT0021) is optimised with more expansion ports, a higher capacity power supply and a larger body and is fully compatible with peripheral components. This makes it an accessible STEAM robot teaching tool for primary and secondary school students. Code DF012 Last items in stock Price €56.60
Micro:bit IOBit Expansion board V1.0 IOBIT expansion board for the micro:bit minicomputer. Allows connection to all minicomputer outputs via a pin strip. Code RA135 Available Regular price €5.78 -€1.50 Price €4.28
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €21.90 -€2.00 Price €19.90