Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 Available Price €12.95
Silicone welding mat with departments - AS19 350 x 250 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0214 Backorder Price €13.50
T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features: - Shield to connect with breadboard - Dimension: 6 x 7.3x 1.9mm - Flat cable female / female 40 pins - Total length: 25cm - Quantity: 1x shield 1x flat cable Code RA010 Available Price €5.94
Power supply 30V 5A UNI-T UTP3315TFL Stabilized power supply with adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5 A. The fan cools the power supply and can operate in constant mode. Power supply 30V 5A UNI-T UTP3315TFL features: - Input voltage: 230VAC - Output voltage: 0-30V adjustable - Output current: 0-5A adjustable - Backlit display - Protection against over-consumption and short circuit - Cooled by fan - Includes crocodile clip cables Uni-T UTP3315TFL datasheet Load Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.2% + 3mA Line Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.1% + 5mA Ripple and Noise Voltage 1mV rms Current 3mA rms Code H0181 Available Price €119.50
Compact Digital non-contact laser tachometer RPM DT2234C+ Compact instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0193 Available Price €15.49
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0312 Last items in stock Price €23.90
Power Level KA2284 Indicator Module 5 LED The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features: - Operating voltage: 3.5 - 12 VDC- 5 level LED KA2284 controller- Adjustable power- 4 pin terminal: - IN: Input voltage to measure Code M0158 Available Price €6.79
Power socket tester with RCD test function Uni-T UT07B-EU The UT-07B-EU tester indicates the correct connection of L, N, PE cables in a socket. It also has a function to check the efficiency of residual current devices (RCD). The device is made of resistant plastic, which is very useful during installation work and ensures long-lasting correct operation. Attention! The RCD check is only possible if the phase is on the right-hand side. Code H0564 Available Price €14.95
Digital Microscope U500X USB 2.0 Magnification 500 Digital microscope with 500x zoom, 8 LED lights and support for microscope included.Discover the emotion of a completely new microscopic world, totally hidden from the naked eye.This USB digital microscope can magnify objects up to 500 times its original size and uses a dynamic image sensor and eight super bright white LED lights to create detailed images.Connect the microscope to your computer via USB and admire each image on your screen.You can see details like skin pores, individual cotton threads, milky clouds or amber inside THC crystals or even small scratches in a collectable coin that would be impossible to detect with the naked eye, can be easily seen with this amazing USB digital microscope. Code H0131 Available Regular price €19.90 -€1.50 Price €18.40
Temperature and humidity meter Uni-T UT333S The UT333S is a digital temperature and humidity meter with stable, safe and reliable performance in a split design. The split design is ideal for monitoring small and difficult to access air ducts. Measure temperature and humidity in real time with the best UNIT technology! Code H0361 Last items in stock Price €34.90
RJ-45 and BNC network cable tester - G248 Tester for RJ45 cables for Ethernet networks and coaxial cables. - 8 LED status and configuration indicators. - Supports UTP,FTP ,RG-58,59,etc... cable. Code H0316 Last items in stock Price €6.49
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 Last items in stock Price €23.90
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 Backorder Price €34.90
Compact Digital non-contact laser tachometer RPM DT2234C+ Compact instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0193 Available Price €15.49
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0312 Last items in stock Price €23.90
Power Level KA2284 Indicator Module 5 LED The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features: - Operating voltage: 3.5 - 12 VDC- 5 level LED KA2284 controller- Adjustable power- 4 pin terminal: - IN: Input voltage to measure Code M0158 Available Price €6.79
Power socket tester with RCD test function Uni-T UT07B-EU The UT-07B-EU tester indicates the correct connection of L, N, PE cables in a socket. It also has a function to check the efficiency of residual current devices (RCD). The device is made of resistant plastic, which is very useful during installation work and ensures long-lasting correct operation. Attention! The RCD check is only possible if the phase is on the right-hand side. Code H0564 Available Price €14.95
Digital Microscope U500X USB 2.0 Magnification 500 Digital microscope with 500x zoom, 8 LED lights and support for microscope included.Discover the emotion of a completely new microscopic world, totally hidden from the naked eye.This USB digital microscope can magnify objects up to 500 times its original size and uses a dynamic image sensor and eight super bright white LED lights to create detailed images.Connect the microscope to your computer via USB and admire each image on your screen.You can see details like skin pores, individual cotton threads, milky clouds or amber inside THC crystals or even small scratches in a collectable coin that would be impossible to detect with the naked eye, can be easily seen with this amazing USB digital microscope. Code H0131 Available Regular price €19.90 -€1.50 Price €18.40
Temperature and humidity meter Uni-T UT333S The UT333S is a digital temperature and humidity meter with stable, safe and reliable performance in a split design. The split design is ideal for monitoring small and difficult to access air ducts. Measure temperature and humidity in real time with the best UNIT technology! Code H0361 Last items in stock Price €34.90
RJ-45 and BNC network cable tester - G248 Tester for RJ45 cables for Ethernet networks and coaxial cables. - 8 LED status and configuration indicators. - Supports UTP,FTP ,RG-58,59,etc... cable. Code H0316 Last items in stock Price €6.49
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 Last items in stock Price €23.90
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 Backorder Price €34.90