RS232/485/422 to RJ45 Ethernet Module, TCP/IP to serial, POE Function

This converter has an internal DC / DC supply and a total isolation between the USB and the RS485 output and allows to establish a reliable and safe communication.
Its FT232RL component has excellent compatibility and a communication rate up to 3M for a maximum distance of 1.2 km. The RS485 output interface uses an optical coupler with high speed for an optical insulation of 1500V and a protection against lightning of 600W: these characteristics allow to protect the computer from the potential damage of static electricity, lightning, over voltages and ground faults. Optical Isolated Converter FT232RL USB 2.0 to RS485 features:
- Required systems: WINDOWS CE / 2000 / XP / VISTA / WIN 7 / LINUX / MAC OS
- Internal DC />

This converter has internal DC/DC power supply and full isolation between USB and RS485 output and enables to establish reliable and secure communication. It adopts the original FT232RNL and SP485EEN chip solution, provides stable communication with built-in galvanic isolation, lightning protection and anti-electrostatic protection, etc., it is an ideal choice for industrial control equipment and/or applications with high communication requirements.

An RS232 serial port to your PC through the USB port USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series features:
- CH341 driver
- Supported OS: WinME, Win2003, Win XP, Vista, Win 7, Linux, MAC OS9.0/OSX
- High quality, shielded cable
- Power and data in the same cable, does not require more adapters
- Compatible USB interface 1.1 and 2.0
- Support up to 1 mega data transfer
- Length 73cm The adapter allows you to connect a computer with: - Electric meters
- Decoders, programmers
- Cash registers
- Satellite TV
- Control panels
- Mobile phones
- Diagnostic interfaces for cars
- The administration of Cisco routers

Standard ISP download port, for on-line programming. Built-in crystal oscillator circuit (8MHz), crystal are replaceable. Has reset push button, power reset push button. 

With KANDA adapter it is ideal for projects with ARDUINO. Characteristic: - AVR 5V / 3.3V microcontrollers - programming voltage change through jumper JP1
- Status LED indicators
- Transmission speed: 5kB / s
- Protective fuse of possible damage to the USB port
- Supported OS: Win ME, Win XP, Vista, Win 7, Win8, Linux
- Works with Bascom, Eclipse, WINAVR, avrDUDE, ARDUINO IDE, ATMEL STUDIO The programmer is compatible with most AVR Atmel processors: - MEGA series 8,16,32,64,218 € ¦
- Tiny series: ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny13A, ATtiny € 15 ¦
- CAN series: AT90CAN32, AT90CAN64, AT90CAN128 € ¦
- AT90S2313 series, AT90S2323, AT90S144, AT90S1434 ¦

This module equipped with a PCF8591 converter has a low current power supply and includes 8 bit CMOS data acquisition devices.
Your converter has four analog inputs, one analog output and one I2C serial bus interface.
It is supplied in the voltage range 2.5V-6V, analog voltage between the negative potential VSS and positive VDD. The control and data signals are transmitted on the two-wire I2C bi-directional bus to the transformed series.
The intensity of the ambient light can be converted into a digital signal thanks to its integrated photoresistor.
It allows access to eight PCF8591 converters on the same I2C bus without additional equipment. Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V features:
- Supply voltage (between VSS and VDD): 2.5-6VDC

This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The  board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board.

This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin.

Ideal for connecting RS485 devices to your PC through the USB port. USB to RS485 USB to 485 Max485 Converter features:
- CH340 controller
- Supported OS: Win XP, Vista, Win 7.8, OS, Linux
- Work with Modbus, Profibus
- USB 2.0 specification with 6Mbps of maximum speed
- Measures: 60x 18x 14 mm

Connecting a 3.3V device to a 5V system is a challenge.
The bidirectional logic level converter is a small device that safely drops the signals from 5V to 3.3V and increases 3.3V to 5V at the same time.
This level converter also works with 2.8V and 1.8V devices. What really separates this logic level converter from our previous versions is that it can successfully set its high and low voltages and go up and down between them safely on the same channel.
Each level converter has the ability to convert 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two sources of voltage (high voltage and low voltage) that your system is using.

Ideal to connect TTL RS232 devices to your PC through the USB port. RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 features:
> - Compatible PL2303 controller
- 5 pins: 3.3V, 5.0V, TxR, RxD, GND
- Heat shrinkable insulating cover
- Led data transmission indicators
- 2.5A self-recovery protector fuse
- Supported OS: Win ME, Win2003, Win XP, Vista, Win 7
- Weight: 40 gr. (approx.)

A standard IEEE1284 DB25 parallel port to your PC via the USB port. Transmission speed reaches 12 Mbps. This cable is "USB Printing Support" port and not Parallel "LPT Printer Port" 

This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards.