FTDI FT232RL USB-UART Converter - Mini USB
  • FTDI FT232RL USB-UART Converter - Mini USB
  • FTDI FT232RL USB-UART Converter - Mini USB
  • FTDI FT232RL USB-UART Converter - Mini USB
  • FTDI FT232RL USB-UART Converter - Mini USB
  • FTDI FT232RL USB-UART Converter - Mini USB

FTDI FT232RL USB-UART Converter - Mini USB

C0014

FTDI FT232RL USB-UART Converter - Mini USB features:
- Serial Converter USB-TTL 3.3V - 5V
- LED indicator of Tx, Rx, power.
- Communication: TTL COM Virtual RS232 RX / TX Transceiver
- Voltage: 3.3V or 5V - per bridge
- Pins: DTR, RX, TX, VCC, CTS, GND
- Protections: Electronic fuse up to 500mA.
- Size: 46 x 19 mm. Step 2.54mm.
- Connection: Mini USB
- Driver: Windows 7 / 8/10 Linux / Mac / Android
- USB TO UART solution with mini USB connector
- FT232RL original on board
- Compatible with Mac, Linux, Android, WinCE, Windows 7/8 / 8.1 / 10 ...
- 3 power mode: 5V output, 3.3V output or powered by the destination board (3.3V-5V)
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Functional pins

Waveshare
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

FTDI FT232RL USB-UART Converter - Mini USB features:

- Serial Converter USB-TTL 3.3V - 5V
- LED indicator of Tx, Rx, power.
- Communication: TTL COM Virtual RS232 RX / TX Transceiver
- Voltage: 3.3V or 5V - per bridge
- Pins: DTR, RX, TX, VCC, CTS, GND
- Protections: Electronic fuse up to 500mA.
- Size: 46 x 19 mm. Step 2.54mm.
- Connection: Mini USB
- Driver: Windows 7 / 8/10 Linux / Mac / Android
- USB TO UART solution with mini USB connector
- FT232RL original on board
- Compatible with Mac, Linux, Android, WinCE, Windows 7/8 / 8.1 / 10 ...
- 3 power mode: 5V output, 3.3V output or powered by the destination board (3.3V-5V)
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Functional pins
- TXD, RXD, RTS #, CTS #: connected to on-board welded clamping heads
- The other pins: accessible in the drilling holes (separate pin heads are also provided for easy connection to the user system, tilt is compatible with pan boards) < / p>

- In the case of working with an MCU:

* VCCIO † ”3.3V or 5V output
* (the module is powered from USB, the integrated jumper must be shorted to 3.3V or 5V)
* GND † ”GND
* TXD †” MC U.RX (signal direction: MCU.RX & lt; & lt; FT232 & lt; & lt; PC.TX)
* RXD † ”MCU.TX (signal direction: MCU.TX & gt; & gt; FT232 & gt; & gt; PC.RX)
* RTS †” MCU.CTS (address signal: MCU.CTS & lt; & lt; FT232 & lt; & lt; PC.RTS)
* CTS † "MCU.RTS (signal address: MCU.RTS & gt; FT232 & gt; & gt; PC .CTS)

Data sheet

Chip
FT232
Tipo de conversión
de USB a TTL

Customers who bought this product also bought

HC-SR501 Motion Detector Module Passive Infrared PIR Sensor

Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º.
An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features:
- Infrared sensor with control circuit
- Adjustable sensitivity and time
- Operating voltage: 4.5V- 20V
- Consumption in Idle state:

S0003

Price €1.79

DRV8833 Controller DC Motor PAP

Driver DRV8833 can control up to two DC motors or one stepper motor with a constant current of 1.5 A (peak 4A ). The motors are controlled, independently by means of PWM signals the direction of rotation of the motors can be controlled, neutral or stop with a frequency of up to 100 kHz. Two input signals (IN1 and IN2) can be used to control one motor (connected to OUT1 and OUT2) and the other two input signals (IN3 and IN4) to control the second motor (connected to OUT3 and OUT4). NOTE: This DRV8833 dual-bridge motor controller is the replacement for the TB6612FNG dual-channel motor controller. The pins come unsoldered. If the motor draws currents above 0.6A, the use of a heat sink may be required. DRV8833 Controller DC Motor PAP features:

R0082

Price €2.45

Bluetooth Transceiver Module HC-05 Wireless

- HC-05 Bluetooth transceiver module with base
- The bluetooth module HC-05 is one of the best options for projects where you need wireless communications.
- The transceiver module (transmission / reception) allows bluetooth wireless connections like master or slave, works in a transparent way as if we made a RS-232 TTL serial connection with cable.
Bluetooth Transceiver Module HC-05 Wireless features:
- Chipset CSR BC417
- 3.6 to 6 Vdc power supply
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps

W0004

Price €5.39

NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module Development Board

NodeMcu module based on ESP8266 controller and programming in Lua language.
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC.
ESP8266-12E is an improved version of ESP8266-12.
It works as a standard WiFi 802.11 b / g / n 2.4 GHz.
USB communication - the CH340 chip. Characteristics of ESP 12E:
- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- TCP Stack / Integrated IP
- PLLs, Regulators and Integrated Power Management Units
- Output Power: 0.15 (W); + 19.5dBm in 802.11b mode

W0013

Price €4.49

Protoboard Breadboard 400 points for Arduino

It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features:
-400 Connections
-Linkable with other Plates
-Base with adhesive to attach it to the work surface
-Measures 82x55x8 mm

PB002

Price €1.90

16 pixel RGB 5050 LED Ring Rainbow WS2812B 5V for Arduino

WS2812B are LEDs that have built-in logic, making it possible to vary the color of each LED individually.
WS2812B includes a integrated inside each LED, which allows each pixel to be accessed individually.
For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 

P0163

Price €4.95

Red Laser Diode 650nm 5mW 6mm 5V

This diode is mainly used for laser toys, all kinds of level meter, instruments, pointer pen, mini LCD projector, laser From remote listeners, remote control burglar alarm light.
Light shots and different display can make the color of the image item a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC
- Mode of point: facula point
- Continuous output
- Operating temperature: -36 ° C - + 65 ° C
- Laser wavelength: 650nm (red)
- Diameter copper head is 6mm
- Power cable length: 75 mm
- Cover material: Brass
- Working life: more than 2000 hours
- Light power: Less than 5mW
- Operating current: Less than 40mA

M0076

Price €1.19

Related articles on blog

€12.95

10,70 tax excl.

Tax included 1
16 items
Price €12.95

Order until 4pm we will send today
30 days return