DSP Learning Board C2000 DSP28335 Processor Texas Instruments TMS320F28335 This product is an SXD28335_QFP learning chart for development including a TMS320F28335 processor with very broad features:. DSP Learning Board C2000 DSP28335 Processor Texas Instruments TMS320F28335 features: Letter SXD28335_QFP - Description of material: - Main processor TMS320F28335 32-bit digital high-speed floating point processor, the maximum working frequency is 150 MHz- Memory on the chip: FLASH: 256Kx16 bit; SRAM: 34Kx16bit; Boot ROM: 8Kx16bit; OTP ROM: 1Kx16bit,- Peripherals on the chip: ePWM (improved PWM version): 12 tracks; HRPWM (high resolution PWM): 6 tracks; EQEP (enhanced version orthogonal coding pulse unit): 2 channels; ADC: 2X8 channels, 12 bits, 80 ns conversion time, 0 ~ 3V range Code B0042 Available Price €79.00
Seeeduino XIAO - ESP32C3 RISC-V tiny MCU board Wi-Fi y Bluetooth5.0 This Seeeduino XIAO is the smallest board in the Arduino-compatible Seeeduino family. It is an Arduino microcontroller, integrated with the ESP32-C3 RISC-V microchip. Despite its tiny size, it has enough interfaces for a multitude of applications. MCU board with Wi-Fi and Bluetooth 5.0, supported battery charging, energy efficiency and rich interface. Code SS041 Available Price €9.79
NanoPi NEO Plus2 CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 1.5GHz Memroy RAM: 1GB DDR3 Storage eMMC: 8GB MicroSD Slot: MicroSD*1 for external storage up to 128GB Connectivity Ethernet: Gbps Ethernet, RTL8211E-VB-CG chip WiFi: 802.11b/g/n Bluetooth: 4.0 dual mode Antenna: IPX Connector*1 Audio Input/Output: 2.0mm pitch 5 pin-header USB USB 2.0*1: USB 2.0 Host Type A USB pin header*2 MicroUSB*1: Power input(5V/2A) Pin-header GPIO 1: 24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO 2: 12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Serial Debug Port: 2.54mm pitch 4pin-header Button Power Key*1 Reset Key*1 MASKROM(BOOT) Key*1 Code B0046 ✗ Out-of-Stock Price €52.90
Arduino compatible Attiny85 Digispark board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features: - USB power supply - External power supply (7v-35v DC 12v maximum recommended) - 5V DC 500mA regulator on board - Programmable with the Arduino IDE - Loaded with Micronucleus bootloader Code B0002 Available Price €4.90
Attiny85 Digispark USB Development Board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and have your own on the digispark wiki. Attiny85 Digispark USB Development Board features: -USB power supply -External power supply (7v-35v DC 12v maximum recommended) -5V DC 500mA regulator on board -Programmable with the Arduino IDE -Loaded with Micronucleus bootloader Code B0001 Last items in stock Price €4.95
SeeedStudio ODYSSEY X86J4105800 Win10 Mini PC 8GB RAM ODYSSEY - X86J4105800 Mini PC Win10 Mas expandible (Linux y Arduino Core) con 8GB RAM. ODYSSEY le permite crear aplicaciones de Edge Computing con una CPU potente e interfaces de comunicación enriquecidas. Basado en Intel Celeron J4105, es una CPU de cuatro núcleos a 1.5GHz que se dispara hasta 2.5GHz. También hay un ATSAMD21 Core integrado, un ARM Cortex-M0 + MCU que le permite programar Arduino en la plataforma x86. Versión no activada sin eMMC. También obtenga el estuche re_computer, que no solo es compatible con ODYSSEY - X86J4105 sino también con todos los SBC populares. Code SS009 Backorder Price €269.00
ODROID-GO This one is a classic! Hardkernel, company of the fathers of well-known ODROID microcomputers, has hit the sweet spot with this old-school GameBoy emulator. Design your own games and improve the existing ones with only Arduino IDE knowledge! Code HK001 ✗ Out-of-Stock Price €47.99
NVIDIA Jetson Orin™ NX 16GB - reComputer J4012-Edge AI Device reComputer J4012-Edge AI Device with NVIDIA Jetson Orin™ NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD Code RA175 Backorder Price €1,229.90
re_computer: The most compatible SBC case! The re_computer box is specially designed for the re_computer system, but is fully compatible with all popular single board computers (SBC). Its stackable structure allows for endless possibilities, and it also comes with a removable acrylic cover on top. The design has been prepared and left the screw holes for the installation of the most commercial boards, including the new ODYSSEY - X86J4105, Raspberry Pi, BeagleBone and Jetson Nano. Code SS014 Backorder Price €28.90
Adafruit Feather RP2040 Adafruit's Feather meets Raspberry Pi's new RP2040 chip, offering this board with great features. This Feather features the RP2040 and all the niceties you know and love from Feather. It comes fully assembled and tested, with the UF2 USB bootloader. It also comes with a header, so you can solder it and connect it to a solderless test board. Code AD001 Available Price €11.90
10.1" Diagonal - 1280x800 IPS HDMI/VGA/AV Display (Compatible with Raspberry Pi & LattePanda) This 10.1-inch high resolution 1280*800 IPS is specifically designed as a monitor for LattePanda (which can be used as a Windows 10 on-board development), Raspberry Pi and other mini PCs. HDMI/VGA/AV interfaces ensure its wide compatibility. Code RA157 Last items in stock Price €159.99
USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano) It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process. Code RA160 ✗ Out-of-Stock Price €17.95
DSP Learning Board C2000 DSP28335 Processor Texas Instruments TMS320F28335 This product is an SXD28335_QFP learning chart for development including a TMS320F28335 processor with very broad features:. DSP Learning Board C2000 DSP28335 Processor Texas Instruments TMS320F28335 features: Letter SXD28335_QFP - Description of material: - Main processor TMS320F28335 32-bit digital high-speed floating point processor, the maximum working frequency is 150 MHz- Memory on the chip: FLASH: 256Kx16 bit; SRAM: 34Kx16bit; Boot ROM: 8Kx16bit; OTP ROM: 1Kx16bit,- Peripherals on the chip: ePWM (improved PWM version): 12 tracks; HRPWM (high resolution PWM): 6 tracks; EQEP (enhanced version orthogonal coding pulse unit): 2 channels; ADC: 2X8 channels, 12 bits, 80 ns conversion time, 0 ~ 3V range Code B0042 Available Price €79.00
Seeeduino XIAO - ESP32C3 RISC-V tiny MCU board Wi-Fi y Bluetooth5.0 This Seeeduino XIAO is the smallest board in the Arduino-compatible Seeeduino family. It is an Arduino microcontroller, integrated with the ESP32-C3 RISC-V microchip. Despite its tiny size, it has enough interfaces for a multitude of applications. MCU board with Wi-Fi and Bluetooth 5.0, supported battery charging, energy efficiency and rich interface. Code SS041 Available Price €9.79
NanoPi NEO Plus2 CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 1.5GHz Memroy RAM: 1GB DDR3 Storage eMMC: 8GB MicroSD Slot: MicroSD*1 for external storage up to 128GB Connectivity Ethernet: Gbps Ethernet, RTL8211E-VB-CG chip WiFi: 802.11b/g/n Bluetooth: 4.0 dual mode Antenna: IPX Connector*1 Audio Input/Output: 2.0mm pitch 5 pin-header USB USB 2.0*1: USB 2.0 Host Type A USB pin header*2 MicroUSB*1: Power input(5V/2A) Pin-header GPIO 1: 24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO 2: 12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Serial Debug Port: 2.54mm pitch 4pin-header Button Power Key*1 Reset Key*1 MASKROM(BOOT) Key*1 Code B0046 ✗ Out-of-Stock Price €52.90
Arduino compatible Attiny85 Digispark board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features: - USB power supply - External power supply (7v-35v DC 12v maximum recommended) - 5V DC 500mA regulator on board - Programmable with the Arduino IDE - Loaded with Micronucleus bootloader Code B0002 Available Price €4.90
Attiny85 Digispark USB Development Board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and have your own on the digispark wiki. Attiny85 Digispark USB Development Board features: -USB power supply -External power supply (7v-35v DC 12v maximum recommended) -5V DC 500mA regulator on board -Programmable with the Arduino IDE -Loaded with Micronucleus bootloader Code B0001 Last items in stock Price €4.95
SeeedStudio ODYSSEY X86J4105800 Win10 Mini PC 8GB RAM ODYSSEY - X86J4105800 Mini PC Win10 Mas expandible (Linux y Arduino Core) con 8GB RAM. ODYSSEY le permite crear aplicaciones de Edge Computing con una CPU potente e interfaces de comunicación enriquecidas. Basado en Intel Celeron J4105, es una CPU de cuatro núcleos a 1.5GHz que se dispara hasta 2.5GHz. También hay un ATSAMD21 Core integrado, un ARM Cortex-M0 + MCU que le permite programar Arduino en la plataforma x86. Versión no activada sin eMMC. También obtenga el estuche re_computer, que no solo es compatible con ODYSSEY - X86J4105 sino también con todos los SBC populares. Code SS009 Backorder Price €269.00
ODROID-GO This one is a classic! Hardkernel, company of the fathers of well-known ODROID microcomputers, has hit the sweet spot with this old-school GameBoy emulator. Design your own games and improve the existing ones with only Arduino IDE knowledge! Code HK001 ✗ Out-of-Stock Price €47.99
NVIDIA Jetson Orin™ NX 16GB - reComputer J4012-Edge AI Device reComputer J4012-Edge AI Device with NVIDIA Jetson Orin™ NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD Code RA175 Backorder Price €1,229.90
re_computer: The most compatible SBC case! The re_computer box is specially designed for the re_computer system, but is fully compatible with all popular single board computers (SBC). Its stackable structure allows for endless possibilities, and it also comes with a removable acrylic cover on top. The design has been prepared and left the screw holes for the installation of the most commercial boards, including the new ODYSSEY - X86J4105, Raspberry Pi, BeagleBone and Jetson Nano. Code SS014 Backorder Price €28.90
Adafruit Feather RP2040 Adafruit's Feather meets Raspberry Pi's new RP2040 chip, offering this board with great features. This Feather features the RP2040 and all the niceties you know and love from Feather. It comes fully assembled and tested, with the UF2 USB bootloader. It also comes with a header, so you can solder it and connect it to a solderless test board. Code AD001 Available Price €11.90