NEC IR Remote Control Infrared emitter HX1838 Arduino Raspberry Remote Control HX1838 Infrared Emitter NEC IR Remote Control Infrared emitter HX1838 features: - 21 keys - Measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with UNO module - Lighting a red 3mm LED by Infrared Realization of a manageable Infrared robot - Wiring the IR Distance remote control + Infrared IR Receiver VS1838 with the UNO module - Fix the IR Distance remote control + VS1838 Infrared IR Receiver in a Mini 2WD DIY Car Robot Kit Code W0020 Available Price €0.98
LED Display Screen Board Matrix 8x8 Common Anode/ Common Cathode Columns Red Dots LED Display Screen Board Matrix 8x8 Common Anode/ Common Cathode Columns Red Dots features:- Supply voltage of the LED points: 1.8-2.4 VDC- LED color of the dots: red- Pin numbers: 16- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 120mA- Power consumed per segment: 80mW- Segment numbers (points): 64- Diameter of a point: 3mm- Operating temperature: -35°C - + 85°C- Storage temperature: -35°C - + 85°C- Screen with common anode connection for the rows and common cathode for the columns- Screen size: 32x32x8 mm Code P0126 Available Price €2.86
MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 The integrated mainboard driver MKS-GEN L V1.0 for 3D printer has been developed by Makerbase to optimize existing problems on the open source controller board such as Ramps 1.4.This product offers more flexible options for users.MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 features:- Mega2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.- Supports a variety of step-by-step drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change stepper motors and motors that users like.- Reserve the signal from the external controller, available to connect an external high current driver to drive stepper motors 57 and 86.se high quality MOSFET, better cooling and more stable. Code I0143 Available Price €31.90
1m 6mm GT2 strap 3D printer 1m 6mm GT2 strap 3D printer features: - GT2 rubber strap with fiberglass reinforced - Length: 1m - Width: 6mm - Strap height: 1.38 mm Code I0006 Available Price €1.95
DRV8825 + Radiator Stepstick Stepper Driver Motor Pololu 3D Printer It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations. Characteristic: - Minimum operating voltage: 8 V - Maximum operating voltage: 45 V - Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated) - Logic voltage: 3 V / 5.5V - Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32 - Factory soldered temples - 4-layer PCB, 2 oz. Copper for improved heat dissipation - Short-circuit and overtemperature protection - Use potentiometer to adjust the current - Measurements: 20x16x12 mm Code I0012 Available Price €3.95
Water Level Sensor Module One Mega Pic Easily convert water level to analog signal The analog output signal can be read directly on the Arduino board Characteristic: - Operating voltage: 3.3V -5 V - Consumption: less than 20 mA - Sensor type: Analog - Operating temperature: 10º C -30º C - Detection area: 40 mm x 16 mm - Dimensions: 60 mm x 20 mm Code S0023 Available Price €1.39
Aluminum Desoldering Pump Tin Antistatic Suction Desoldering iron for the removal of excess tin. You can quickly and effectively remove solder from a plate or circuit.Replaceable antistatic nozzle.Manufactured in Aluminum.Aluminum Desoldering Pump Tin Antistatic Suction features:- Length: 190mm- Desoldering pump- High suction power- Replaceable long-life silicone tip- Light weight- Easy use with one hand, light and resistant- Vacuum Solder Aluminum Desoldering Pump Solder Remover Pump Tool- A good quality product for fast and efficient removal of excess solder, ideal for PCB repair- High-capacity spring-loaded plunger quickly eliminates welding in one action. The Pumping tool easily- Disassemble for a quick clean Code H0001 Available Price €2.95
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm Code I0087 Available Price €10.95
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Price €13.49
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.95
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm Code I0087 Available Price €10.95
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Price €13.49
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.95
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19