Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm

Load Cell 1 kg Scale Sensor Weight Arduino 
Load cell to measure weight up to 1kg
The transducer measures the deformation of the metal structure and converts it into a few mV. Load cell Load Cell Weight Sensor 1kg features:
- Load range: 1kg
- Operating voltage: 3VDC ~ 14 VDC.
- Nominal output: 1.0 ± 0.15mV / V
- Repeatability: 0.03% FS
- Effect of the temperature at the outlet: 0.01% F.S / ° C

AMS1117 Buck fixed output module 3.3V 800mA features:
- Based on AMS1117-3.3V regulator
- Input Voltage: 4.5 - 12Vdc
- Output Voltage: 3.3 Vdc (+/- 0,05V)
- Max.output current: 800mA
- Operating temperature: -40ºC to + 150ºC
- Dimensions: 25mm x 12mm

Hantek Oscilloscope 6022BE USB 2 channel 20MHz features:
- 20 MHz bandwidth
- High performance: 48MSa / s sampling in real time
- 23 measurement functions
- The ability to perform mathematical operations:
- Addition - add CH1 + CH1
- Subtraction - subtract CH1-CH2 or CH2-CH-1 - Multiplication - multiplication CH1 * CH2
- Division - division CH1: CH2 or CH2: CH1
- FFT analysis spectral analysis using a fast Fourier transform
- The ability to save runs in the following formats: text files, jpg / bmp graphics files, Excel / MS Word files, CSV
- Compatible with LabVIEW
-USB 2.0 communication interface - powered from the USB port - Operating System: Windows8, Windows 7, Windows NT, Windows 2000, Windows XP, VISTA

The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision.
The ideal obstacle detection detector for the installation of smart robots.
TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object.
The working wavelength is 950nm.
The transmitter is infrared LED and the phototransistor receiver.
By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected).
The sensor allows the detection of an object at a distance of up to 12 mm.

A4988 + RepRap Radiator features:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A (adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16
- Factory soldered temples
- Use potentiometer to adjust current
- Measurements: 20x16x12 mm

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

Ideal for connecting TTL RS232 devices to your PC through the USB port. PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin features:
- Compatible controller PL2303HXA
- 4 pins: 5.0V (red), TxR (green), RxD (white), GND (black)
- 2.5A self-recovery protective fuse
- Supported OS: Win8, Win10, WinME, Win2003, Win XP, Vista, Win 7 The 64-bit Prolific drivers provided by Microsoft through Windows Update will not work with most adapters and will therefore generate the generic "Code 10" error.

Cutting Pliers 130mm features:
- This model is not isolated, please use it without current
- Use to cut soft materials, electronic components, cables, plastic card
- Can also be used for welding work