NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module Development Board NodeMcu module based on ESP8266 controller and programming in Lua language. NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC. ESP8266-12E is an improved version of ESP8266-12. It works as a standard WiFi 802.11 b / g / n 2.4 GHz. USB communication - the CH340 chip. Characteristics of ESP 12E: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - TCP Stack / Integrated IP - PLLs, Regulators and Integrated Power Management Units - Output Power: 0.15 (W); + 19.5dBm in 802.11b mode Code W0013 ✗ Out-of-Stock Price €3.71
Gear Reducer Motor 6V DC 200RPM for Smart Car Gear Reducer Motor 6V DC 200RPM for Smart Car features: - Voltage: 3 to 6V DC- Speed without load: 200 RPM to 6V DC Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles - Wiring of the 6V DC 200 RPM motor with the L298N double bridge H controller module Code R0045 Available Price €1.98
Resistor 2,2K Ohm 5% 0,25W 1/4W Resistor 2,2K Ohm 5% 0,25W 1/4W features:-2.2K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0015 Available Price €0.07
Multihobby box without compartment Plastic Box features: - Transparent color- Dimensions: 25x17x5cm. Code K0304 ✗ Out-of-Stock Price €2.88
Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm -Length 1m Code K0035 Backorder Price €0.37
Pro Mini 16MHZ 5V Arduino compatible board - Bootloader Pin Header Compatible 100% ARDUINO - Pro Mini Atmega328P 5v 16Mhz - Miniaturized compatible version of Arduino Pro Mini - It has an Atmega328P chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can only solder the pins that we need Characteristic: - ATmega328P 16MHz chip with external quartz crystal - Auto-reset - micro switch - Integrated 5V regulator - FLASH 32kB memory - SRAM 1kB memory - EEPROM 1Kb memory - Analog input A0-A7 - 8 PWM channels - External interruption - TWI / I2C, UART, SPI interfaces - Power and status LEDs - Dimensions: 18x33mm - Weight: 30 grams Useful links for Arduino /> Code B0019 Available Regular price €7.40 -€4.00 Price €3.40
LDR Module Motor Resistance KY-018 This module adapted for the arduino is a light sensor. The resistance of the LDR cell decreases as the light intensity increases. On the contrary in a dark environment, the resistance of the LDR cell increases accordingly. Characteristic: - 3-pin connector: 1- GND 2- VCC 3- analog output - the voltage depending on the light - Supply voltage: 3.3 V-5VDC - PCB size: 19x15x8 mm Code S0122 Available Price €1.15
PLA Filament 1.75mm 1kg Colour Glacier White Filament of PLA HD material, perfect for basic and fast projects that do not need excessive durability, for 3D printers. The diameter of the filament is 1.75mm. The package contains 1kg of coloured filament Glacier White Code I0720 ✗ Out-of-Stock Price €20.66
Tower Pro Micro Servo 9g SG90 360 degree Tower Pro Micro Servo 9g SG90 360 degree features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0075 Available Price €2.44
LSC-16 Digital Servo Motor Controller 16 channels LSC-16 Digital Servo Motor Controller 16 channels features: - With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU. - CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed. - 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions! - Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically). - 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor. Code R0046 Available Regular price €21.32 -€2.00 Price €19.32
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.31
Servo Extension Lead Wire Cable 150mm JR Futaba Servo Extension Lead Wire Cable 150mm JR Futaba features:- Cable length: 150mm Code R0025 ✗ Out-of-Stock Price €1.30
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €4.21
Servo Extension Lead Wire Cable 50cm JR Futaba Servo Extension Lead Wire Cable 50cm JR Futaba features:- Cable length: 50cm Code R0027 Available Price €1.61
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.31 -€1.00 Price €1.31
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 ✗ Out-of-Stock Regular price €6.57 -€0.96 Price €5.61
Servo Extension Lead Wire Cable 200mm JR Futaba Servo Extension Lead Wire Cable 200mm JR Futaba features:- Cable length: 200mm Code R0073 Available Price €1.23
Micro Digital Servo Right Symmetry 1.5g 4.8V This right symmetry micro digital servo is of excellent quality and very light weight. Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0002 Available Price €7.02
Tower Pro Micro Servo 9g SG90 360 degree Tower Pro Micro Servo 9g SG90 360 degree features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0075 Available Price €2.44
LSC-16 Digital Servo Motor Controller 16 channels LSC-16 Digital Servo Motor Controller 16 channels features: - With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU. - CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed. - 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions! - Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically). - 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor. Code R0046 Available Regular price €21.32 -€2.00 Price €19.32
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.31
Servo Extension Lead Wire Cable 150mm JR Futaba Servo Extension Lead Wire Cable 150mm JR Futaba features:- Cable length: 150mm Code R0025 ✗ Out-of-Stock Price €1.30
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €4.21
Servo Extension Lead Wire Cable 50cm JR Futaba Servo Extension Lead Wire Cable 50cm JR Futaba features:- Cable length: 50cm Code R0027 Available Price €1.61
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.31 -€1.00 Price €1.31
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 ✗ Out-of-Stock Regular price €6.57 -€0.96 Price €5.61
Servo Extension Lead Wire Cable 200mm JR Futaba Servo Extension Lead Wire Cable 200mm JR Futaba features:- Cable length: 200mm Code R0073 Available Price €1.23
Micro Digital Servo Right Symmetry 1.5g 4.8V This right symmetry micro digital servo is of excellent quality and very light weight. Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0002 Available Price €7.02