Micro Digital Servo Right Symmetry 1.5g 4.8V

Micro Servo Compatible with MG90S features:
- Operating voltage: 4.8Vdc (5V) or 6Vdc
- Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V
- Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V
- Gear type: metallic
- Turning width: 180º
- Temperature working: from -30 to 60 ºC
- 3 plastic propellers / arms
- Fixing screws
- Size: 22.6 x 11.8 x 31 mm
- Weight: 13.4 gr

This left symmetry micro-digital servo is of excellent quality and very light.
Its high speed and rotational capacity is great Advantage for developing sensitive projects with quick response. Characteristic: - Symmetry of the servo: for left incorporation
- Plug: 1- red wire: positive polarity (+)
2- black wire: negative polarity (-)
3- white wire: control signal
- Model: GS-1502 - Type: Analog Servo
- Rotation angle: 180 °
- Torque:
- 0.20kg / cm if Vin = 4.8V
- 0.24kg / cm if Vin = 6V
- Speed:
- 0.11sec if Vin = 4.8V
- 0.09sec if Vin = 6V
- Operating voltage: 3.7V-5V - Material type: Nylon
- PCB size: 21x15x12 mm

Peltier Ceramic Cell TEC1 12706 12V 60W features:
- Max Power: 60w
- Voltage: 12v
- Max Voltage: 15,2v
- Max Current: 6A
- Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC

This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos.
It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity.
PCA9685 digital servo motor controller 16 channel PWM features:

- Supply voltage: 3-5 VDC,
- Maximum motor voltage: 6 VDC,
- Number of channels: 16,
- Resolution per channel: 12 bits,
- Interface: I2C,
- Working frequencies: 40-1000 Hz,
- PCB size: 62.3x25.3mm .

Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features:
- Mounting kit
- Ceramic Peltier Cell 12V TEC1-12706
- Heatsink 12x10x25mm (hot side)
- Heatsink 60x40x25mm
- Color black or silver
- Thermal insulation 70x65mm for cell
- Fan 12V 90x90x25mm with grille
- Thermal paste 0.5g
- Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC
- Max Power: 60w
- Voltage: 12v
- Max Voltage: 15.2v
- Max Current: 6A
- Temperature Variation:

9g digital servo new version of SG90.
POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque.
It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features:
Weight: 9g
Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v)
Gear type: POM with carbon fiber
Operating speed: 0.1sec /60degree (4.8v)
Temperature range: 0„ƒ_ 55„ƒ
Dead band width:1us
servo wire length: 25 cm
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm