Mounting Bracket for Nema Engine 17 42mm
  • Mounting Bracket for Nema Engine 17 42mm
  • Mounting Bracket for Nema Engine 17 42mm
  • Mounting Bracket for Nema Engine 17 42mm
  • Mounting Bracket for Nema Engine 17 42mm

Mounting Bracket for Nema Engine 17 42mm

I0044

Mounting Bracket for Nema Engine 17 42mm features:
- Steel bracket for PAP Nema 17 3D printer motor
- Mounting bracket of 42mm L shape alloy steel for The NEMA17 3D Stepper Motor Printer
- Material: Alloy Steel - Size: 5 x 5 x 5cm
- Black Color
- Fit for 42mm Stepper Motor as NEMA17

OEM
5905323237339
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Mounting Bracket for Nema Engine 17 42mm features:

- Steel bracket for PAP Nema 17 3D printer motor
- Mounting bracket of 42mm L shape alloy steel for The NEMA17 3D Stepper Motor Printer
- Material: Alloy Steel - Size: 5 x 5 x 5cm
- Black Color
- Fit for 42mm Stepper Motor as NEMA17

Customers who bought this product also bought

Resistors Kit 5% 0,25W 1/4W

Resistors Kit 5% 0,25W 1/4W features:
 
-10 pcs - 100 Ohm
-10 pcs - 220 Ohm
-10 pcs - 1,0k Ohm
-10 pcs - 2,2k Ohm
-10 pcs - 4,7k Ohm
-10 pcs - 10k Ohm
-10 pcs - 100k Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

D0071

Price €2.44

10A DC-DC Converter Adjustable Downstream 8V-40V to 1.25V-36V

This power supply delivers an output voltage lower than that of the input and allows power loads up to 10A.
It has its heat sink, it is Recommended to use it for loads up to 8A for optimal cooling.
Includes its foot protection kit, which greatly facilitates heat dissipation and use. 10A DC-DC Converter Adjustable Downstream 8V-40V to 1.25V-36V features:
- Input voltage: DC 8V-40V
- Output voltage: DC 1.25V-36V adjustable with potentiometer (can only be used as a reducing module, the input must be higher than 1.25V output)
- Output current: 8A (Max 10A for a short time), adjustable with potentiometer. Below 5A it can cool naturally
- Output power: Max 150W
- Key components:
- Electrolytic capacitors 470µF - 50V

A0074

Price €11.15

Adapter 2.5mm female power jack with PCB

The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ...
This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects.
It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
Adapter 2.5mm female power jack with PCB features:
- Connector type: 2.5mm female jack ,
- Color: black,
- Nominal voltage: 12v DC,
- Maximum current: 0.5A DC,
- Insulation resistance: ‰ ¥ 100MΩ,
- Operating temperature: -25ºC to + 85ºC,
- Number of output pins: 3
- Pitch between output pins: 2.54mm.

M0194

Price €0.74

Power supply DC 24V 6.5A 150W

Power supply DC 24V 6.5A 150W features:
- Supply voltage: 110 / 230V AC
- Output voltage: 24V DC - Output amperage: 6.25A
- Power at 24V: 150W
- Dimensions: 200mm x 99mm x 43mm
- IP20 ROHS CE

A0109

Price €13.60

Module MAX3232 Converter RS232 to TTL Port DB9 female

This product is widely used in radio modifications, cell phone flash, xbox360 flash detection, GPS, car, Flash, HDD repair, top box upgrade.
It can be used to download MCU types. Module MAX3232 Converter RS232 to TTL Port DB9 female features:
- Input voltage: 3.3 - 5 VDC
- Multi-channel RS232 controller / receiver MAX3232
- Transmission / reception speed up to 250 kbit / s
- DB9 serial port
- Interface with four pins:
       - TX: transmission signal
       - RX: reception signal
       - VCC: Supply voltage
       - GND: connects the power cathode
- Operating temperature: -65 ° C - + 150 ° C
- UART communication
- Includes a 4-wire female / female connector for easy connection with the arduino

C0016

Price €2.40

Ceramic Capacitor 100nF 50v 104

Ceramic Capacitor 100nF (0,1uF) 50v 104 PCB PIC Arduino features:

Orders only in multiples of 20 units
-Type: Ceramic Y5V
-Tolerance: +80/-20%
-Dimensions: diameter 9.5mm, pitch 5.08mm

D0057

Price €0.05

Shaft Coupling Motor Connector 5mm 8mm CNC

Shaft Coupling Motor Connector 5mm 8mm CNC features:
- Fixed coupler in high quality aluminum
- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod
- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle
- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission
- Material: Aluminum Alloy
- Coupler height (L): 25 mm
- Outside diameter: 14mm
- Shaft diameter: 5mm / 8mm
- Screws Position: 4mm
- Flexible Shaft Couplers 5mm*8mm

I0137

Regular price €1.64 -€0.50 Price €1.14

LM35DZ Temperature Sensor TO-92

LM35 Temperature Sensor LM35DZ TO92 features:
- The output is linear and each degree Celsius equals 10 mV
- Power supply from 4 to 30 Vdc
- Connection through analog input
- Temperature range from 0ºC to 100ºC
- Linearity +10 mV / ºC
- Quantity: 1 unit

S0016

Price €2.06
€3.10

3,10 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €3.10

Order until 4pm we will send today
30 days return