Platform camera + 2 SG90 Servo Motor 9g - Kit for Arduino
  • Platform camera + 2 SG90 Servo Motor 9g - Kit for Arduino

Platform camera + 2 SG90 Servo Motor 9g - Kit for Arduino

R0021

Platform camera + 2 SG90 Servo Motor 9g Arduino Kit features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Force: 1.2kg / 42.3oz (4.8V), 1.6kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 Degree C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm Contents: - Servo 9g - 2 units
- Platform for camera - 1 unit

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Platform camera + 2 SG90 Servo Motor 9g Arduino Kit features:


- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Force: 1.2kg / 42.3oz (4.8V), 1.6kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 Degree C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm Contents: - Servo 9g - 2 units
- Platform for camera - 1 unit

Customers who bought this product also bought

UNO WIFI Board CH340 compatible Arduino, NodeMCU, WeMos ESP8266

  - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields   Characteristic:   - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: micro USB female 

B0070

Price €9.91

Support for HC-SR04 Ultrasonic Sensor

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

S0005

Regular price €1.20 -€0.50 Price €0.70

Matrix Membrane Keyboard 4x4 Modulo

High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side.
Ideal for your Arduino projects, but can also be used with other microcontrollers.
Matrix Membrane Keyboard 4x4 Modulo features:

- Rating circuit, Max: DC 35V 100 mA
- Cable length: 85 mm
- Dupont 8 pin connector
- Specific insulation: 100 M Ohm, 100V
- Useful life: + 1 million uses
- Contact parting:

M0025

Price €1.48

40x Female-Female Cable 20cm

40x Female-Female Cable 20cm features:
-Length: 20cm
-Quantity: 40 wires
-Dupont female connectors on both ends
-Compatible with 2.54mm male connectors
-High quality and good working condition
-Easy to install and use

K0004

Price €2.06

Passive Buzzer 5V

The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features:

- Input voltage: 3V to 12V
- Diameter: 12mm
- Height: 7.5mm
- Pin spacing: 6.5mm
- Impedance: 16 Ohm
- Working frequency: 2 to 5 KHz
- Quantity: 1 unit

M0011

Price €0.32

ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics

WIFI transceiver based on the ESP8266 controller.
It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low power mode:

W0003

Price €1.61

5x Push Switch Button B3F Omron Red Key 12mm

5x Push Switch Button B3F Omron Red Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

K0073

Price €0.16

ATmega2560 R3 REV3 16U2 Mega2560 module with USB cable

It has an Atmega2560 chip running at 16Mhz with a factory loaded bootloader with 54 digital input / output pins (from which 14 can be used as PWM outputs) and 16 analog inputs, 4 UART (hardware serial ports). The board includes a USB connector, an ICSP port, a reset button and some status LEDs. Atmega16U2 programmed as a USB-to-serial converter. Simply connect it to a computer with a USB cable or power with a power adapter and DC connector.

B0003

Price €20.58
€4.12

4,12 tax excl.

1
10 items
Price €4.12

Order until 4pm we will send today
30 days return