AG Gold thermal grease 3g syringe
  • AG Gold thermal grease 3g syringe

AG Gold thermal grease 3g syringe

Q0090

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

Termopasty
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

AG Gold thermal grease 3g syringe description

AG Gold is a high quality thermal conductive paste.
Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.
Pasta is the best alternative for overlockers.

AG Gold thermal grease 3g syringe features:

  • - Manufacturer: TermoPasty,
  • - Thermal conductivity:> 2.8 W / mK,
  • - Thermal impedance: <0.095 ° C in2 / W
  • - Specific gravity:> 2.5g / cm3,
  • - Evaporation: <0.001%,
  • - Fluency: <0.05%,
  • - Electrical conductivity:> 5.1,
  • - Viscosity: does not flow,
  • - Thixotropic index: 380 +/- 10,
  • - Working temperature from -30ºC to + 300ºC,
  • - Temperatures supported: -50ºC to + 340ºC,
  • - Gold color
  • Mode of use:
  • - Store in a well ventilated, cool and dry place.
  • - Keep containers tightly closed when not in use.
  • - Protect against exposure to sunlight.
  • Applications:
  • - Fill the micro inequalities between the moving elements, eg. processor and radiator,
  • - Perfect as a substance that transfers heat from the condenser tubes to the exchanger in the solar vacuum.
  • Content:
  • - A syringe of 3g.

Data sheet

Tipo
Grasa
Volumen [ml]
3

Customers who bought this product also bought

Silicone Thermal Paste Syringe 25g

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C

Q0008

Price €3.96

9-pin female sub-D connector for soldering

9-way mounting solder sub-D female connector.
9-pin female sub-D connector for soldering features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are Supplied with stamped and formed contacts
- Straight female connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

K0195

Price €0.57

Terminal for JST PHR Female Connector 2mm

Terminal for JST PHR Female Connector 2mm features:
Manufacturer JST Connector series: PH Connector: contact Type of connector: female Type of connector: conduit-plate Mechanical assembly: crimped Working voltage: 100V Working current: 2A Material: phosphor bronze Cable size: 30AWG..24AWG Compatible with: JST PHR-2 Female 2 PIN 2mm Connector JST PHR-2 Female 3 PIN 2mm Connector PH series data sheet

K0216

Price €0.08

Female Strip 40 Short Pins

Female Strip 40 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 1 unit of strips of 40 female pins each

K0139

Price €0.57

Shaft Coupling Motor Connector 5mm 5mm CNC

Shaft Coupling Motor Connector 5mm 5mm CNC features:
- Fixed coupler in high quality aluminum
- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod
- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle
- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission
- Material: Aluminum Alloy
- Coupler height (L): 25 mm
- Outside diameter: 14mm
- Shaft diameter: 5mm / 5mm
- Screws Position: 4mm
- Flexible Shaft Couplers 5mm*5mm

I0136

Regular price €1.64 -€0.50 Price €1.14

Related articles on blog

No related article on blog

€3.51

3,51 tax excl.

1
Last 3 items
Price €3.51

Order until 4pm we will send today
30 days return