LED 1W Red SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã beam angle: 120 degrees - Color emission: red Code P0044 Available Price €0.98
10x Multicolor LED 5mm 7 colors fast blink 5mm multicolor LED with automatic color change. 7 different colors are emitted and the blinking is fast. Code P0136 Available Price €0.15
Converter DC USB Step Down 7V-24V to 5V 3A Converter DC USB Step Down 7V-24V to 5V 3A features:- Voltage reduction module with USB connector- DIY mobile power supply, to achieve the 5v output to charge the phone, mp3, mp4, psp, etc. can not charge for the ipad- The USB output converter module has short circuit protection 5A current automatic protection- Based on the monolithic MP2307 controller- Rectification: not synchronous- Input voltage: DC 7v to 24v- Output voltage: DC 5v- Output current: 3A (Little time 4A)- Output connection: USB Type A female connector- Input connection: Terminal with screws- Efficiency of transformation: 96%- Switching frequency: 340KHz- Output ripple: 30mV (max.)- Load regulation: ± 0.5% Code A0016 Available Price €3.99
AG Extreme thermal grease 3g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK. Code Q0087 Available Price €6.85
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
LED 1W Blue SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 20-30LM - Ã beam angle: 120 degrees - Color emission: blue Code P0047 Available Price €0.98
LED 3W Blue SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.1-4.1V - Current: 700mA - Luminous flux: 39-55LM - Ã beam angle: 120 degrees - Color emission: blue Code P0152 Available Price €1.59
Speed controller for DC motor (PWM) 10V-30VDC 120W 5A 10A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 10-30VDC, - Max continuous output current: 5A (peak current 10A), - Max power: 120W, - Dimensions: 61x27.9x45.7mm, - PWM frequency: 16kHz, - Adjustable duty cycle: 5% -100%, - Integrates a regulator L7805CV TO- 220, - Incorporates a 10A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0088 ✗ Out-of-Stock Price €8.49
WS2812B RGB LED Strip White 1m 30 LED/M IP65 WS2812B RGB LED Strip White 1m 30 LED/M IP65 features: - IP65 RGB Addressable Smart Arduino - RGB LED WS2812B S2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually S2812B includes a built-in inside each LED, which allows each pixel to be accessed individually - For this reason, these types of LEDs are called individually indexable - They are based on the 5050 LED - 30 individually indexable LED diodes - 24-bit color control (8-bit PWM per channel) - 16.8 million colors by LED - One-wire communication - Power: 5 V idth: 11 mm - Thickness: 2.6 mm - Length: 1 meter - Consumption: 1.8A (all white) ater resistant Code P0103 Available Price €9.75
LED RGB 5050 WS2812B White RGB LED SMD5050 WS2812B with white packaging, waterproof level IP20. They are smart that are used to create places with decorative lighting, lighting the information screens located inside and outside facilities. They must be integrated to be operated with the help of any type of smart strip controllers, which can be: autonomous (offline), subordinate (online), light scattering ( to create musical lights) and programmable (control). LED RGB 5050 WS2812B White features: - Power supply: +3.7 - +5.3 VDC - Logic input voltage: VDD-0.5~VDD + 0.5 - Operating temperature: -25 ° C - + 85 ° C - Storage temperature: -40 ° C - + 105 ° C - 4 pins: 1- VDD: LED power supply 2- DOUT: Control data signal output 3- GND: Ground connection Code P0095 Available Price €0.30
LED Power Diode COB 7W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.Place a little thermal silicone in each of the diode placement centers. Code P0147 Available Price €2.11
LED Power Diode COB 15W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0031 Last items in stock Price €3.71
LED Lighting Chain WS2811 Pixels Digital Addressable RGB 50LED 5V IP68 This chain has DC5V LEDs that have built-in logic, so it is possible to vary the colour of each LED individually. WS2811 includes a built-in integrated inside each LED, which allows access to each pixel individually. Black background Easy programming with Arduino, ESP32, ESP8266, etc. Code P0164 Available Regular price €15.95 -15% Price €13.56
3x Power LED Aluminum Heat Sink 3W 5W 3x Power LED Aluminum Heat Sink 3W 5W features: - Outside diameter: 36mm- Height: 30mm- Quantity: 3 units Code P0038 Available Price €1.95
LED 1W Orange SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã Beam angle: 120 degrees - Color emission: yellow / orange Code P0045 Available Price €0.98
WS2812B Addressable 8x32 Flexible RGB LED Array Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED. Code P0207 Available Price €18.95
16 pixel RGB 5050 LED Ring Rainbow WS2812B 5V for Arduino WS2812B are LEDs that have built-in logic, making it possible to vary the color of each LED individually. WS2812B includes a integrated inside each LED, which allows each pixel to be accessed individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. Code P0163 Available Price €4.95
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €9.95
LED Power Diode COB 15W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0031 Last items in stock Price €3.71
RGB LED Smart Strip WS2812B Black 5m 30LED/m IP65 WS2812B are LEDs that have built-in logic, making it possible to vary the color of each LED individually. WS2812B includes a integrated inside each LED, which allows each pixel to be accessed individually. For this reason, these types of LEDs are called individually indexable. Code P0105 Last items in stock Price €29.95
White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93
LED Diode COB 3W 3000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0144 Available Price €1.32
5x Power LED Aluminum Heat Sink 1W 3W 5x Power LED Aluminum Heat Sink 1W 3W features: - Outside diameter: 36mm- Height: 15mm- Quantity: 5 units Code P0037 Available Price €1.48
LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32
LED Power Diode COB 5W 3000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.Place a little thermal silicone in each of the diode placement centers. Code P0142 Available Price €2.11
LED 1W Green SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 70-80LM - Ã beam angle: 120 degrees - Color emission: green Code P0046 Available Price €0.98
LED Diode COB 20W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0032 Available Price €4.49
LED 1W Red SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã beam angle: 120 degrees - Color emission: red Code P0044 Available Price €0.98