Desoldering Wire 2.5mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 2.5mm features:- Material: Copper- Length: 1.5m- Width: 2.5mm Code H0007 Available Price €1.48
Infrared LED Flame Sensor 5mm module Led module infrared sensor for ArduinoDetector of the source of fire or flame, can detect a flame or wavelength 760 nm-1100 nmParticularly sensitive to the flame spectrum.This optical flame sensor is a device that detects the existence of combustion by the light emitted by it. Infrared LED Flame Sensor 5mm module features:- 4 Pins Output: - A0: analog output - D0: digital output - GND: ground connection - VCC: 5V module power- Range of light, Distance of 80 cm.- Angle detection of about 60 degrees,- This light can be detected by an optical sensor,- Can be captured by digital inputs and analog inputs of Arduino. Code S0133 Available Price €1.15
Pulley GT2 20 Teeth 5mm Aluminium Pulley 3D Printer Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features: - Number of teeth: 20 - Pitch: 2mm - Material: Aluminum alloy - Outside diameter: 18mm - Inner hole: 5mm - Use with strap: 6mm and 6.35mm - Ideal to fix on the axis of the motors of your 3D printer Code I0031 Available Price €1.48
Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap features: - Number of teeth: 16 - Pitch: 2mm - Material: aluminum alloy - Outside diameter: 13mm - Inner hole: 5mm - Use with strap: 6mm - Quantity: 1 unit of 16 teeth GT2 pulley, 6mm wide and 2 studs - Ideal for fix on the axis of the motors of your 3D printer Code I0004 Backorder Regular price €1.61 -€0.50 Price €1.11
12V Push Button LED Red 16mm 12V Push Button LED Red 16mm features:- Momentaneo panel N/A NO with return 2A Steel- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0096 Available Price €4.87
Label Killer Spray 300ml Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended! Code Q0057 ✗ Out-of-Stock Price €4.09
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €4.79
UNO Board CH340 clone - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: USB female Type B Code B0011 Available Price €6.19
Isopropyl Alcohol Spray IPA Plus 60mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (like those of ROM cartridges)- Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)- Laser lenses in optical disk drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and LCD screen Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for slates. Code Q0037 Available Price €2.44
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €4.79
Isopropyl Alcohol IPA Plus 5L Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges) - tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives) - laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU) -of the keyboard and LCD screen -Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate. Code Q0106 Available Price €32.93
Liquid Flux RF800 100ml Alcohol Based Rosin Welding Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:- Flux liquid alcohol based for electronic welding.- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- 100ml capacity- Content of solid bodies0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0022 Available Price €4.09
Isopropyl Alcohol IPA Plus 500mL Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)-the keyboard and the LCD screen Code Q0036 ✗ Out-of-Stock Price €4.54
Ethyl alcohol 5L disinfectant for surfaces A bottle of 5000ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0112 ✗ Out-of-Stock Price €20.65
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €2.88
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €10.70
Ethyl alcohol 500mL disinfectant for surfaces A bottle of 500ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0113 Available Price €3.71
Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Regular price €3.18 -€0.86 Price €2.32
Isopropyl Alcohol Spray IPA Plus 60mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (like those of ROM cartridges)- Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)- Laser lenses in optical disk drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and LCD screen Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for slates. Code Q0037 Available Price €2.44
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €4.79
Isopropyl Alcohol IPA Plus 5L Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges) - tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives) - laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU) -of the keyboard and LCD screen -Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate. Code Q0106 Available Price €32.93
Liquid Flux RF800 100ml Alcohol Based Rosin Welding Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:- Flux liquid alcohol based for electronic welding.- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- 100ml capacity- Content of solid bodies0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0022 Available Price €4.09
Isopropyl Alcohol IPA Plus 500mL Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)-the keyboard and the LCD screen Code Q0036 ✗ Out-of-Stock Price €4.54
Ethyl alcohol 5L disinfectant for surfaces A bottle of 5000ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0112 ✗ Out-of-Stock Price €20.65
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €2.88
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €10.70
Ethyl alcohol 500mL disinfectant for surfaces A bottle of 500ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0113 Available Price €3.71
Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Regular price €3.18 -€0.86 Price €2.32