Solectro Kits

Mini UNO ATMega328 basic kit for Arduino to learn programming.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.

UNO R3 Basic Kit ATMega328 in a box for Arduino. It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
100% Arduino compatible
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x Protoboard Breadboard 5x7cm
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 3x BC547B Bipolar Transistor NPN 50V 100mA 0.1A TO-92
- 3x BC557B Bipolar Transistor PNP 50V 100mA 0.1A TO-92
- 1x PCF8574P I/>

Perfect kit to learn programming and electronics in the middle of Arduino. This kit includes a manual in Spanish with 20 basic projects. It allows to build various projects of varying complexity, from the easiest ... to the most complicated. The kit does not include an Arduino board. To put it, you can buy an original Arduino board or a Chinese equivalent separately.

Perfect kit to learn programming in the middle of Arduino the basic of electronics
It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.   Characteristic:   It includes the following module references:   - 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module
- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor
- 1x Infrared LED Flame Sensor 5mm
- 3x Photoresistor GL5516 LDR

Perfect "Starter Kit Mega XL" to learn programming with arduino the basis of electronics. It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x R3 REV3 ATmega2560 16U2 Mega2560 + USB 100% Compatible - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor
- 1x fire sensor
- 3x Photoresistor GL5516 LDR
- 4x Push Switch Button B3F Omron Blue Key 12mm

Perfect "Kit XXL Sensors" to learn programming with Arduino, the basis of electronics. It allows to build various projects of various complexity, from the easiest ... to the most complicated. The elements are placed in the box to keep everything in order. The kit does not include an Arduino board. An original Arduino board or a Chinese equivalent can be purchased separately.  

Kit Funduino I / O Expansion starter kit for Arduino UNO R3.
Kit 37 Sensors in a Box for Arduino features:
Including the referencias of módulos siguientes: - 1x módulo Funduino I / O Expansion
- 1x módulo zumbador activo Keyes
- 1x módulo foto resistencia Keyes
- 1x módulo sensor of temperatura Keyes
- 4x módulos sensor LED sombrero of Keyes paja
- 1x módulo sensor of sonido Keyes
- 1x módulo sensor Rotation Keyes
- 1x pulsador módulo
- 1x distancia sensor HC-SR04
- 1x módulo Joystick Doble 2 Ejes XY
- 1x servo 9g SG90
- 9x Dupont cables con conector 3 pins
- 20x Hembra-Macho Cables 20cm
- 1x USB cable for Arduino UNO Tipo A-B 50cm Helpful Links:
Install the IDE Arduino development interface

The perfect Arduino sensor kit to start learning about the world of electronics with Arduino. It comes with our step-by-step guide to each sensor, as well as its libraries. 

The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit.

Perfect kit to learn programming in the middle of Arduino the basic of electronics It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.  The kit does not include an Arduino board. An original Arduino board or a Chinese equivalent can be purchased separately.  

check it Contenido:
- 20x Cable macho-macho 20cm - 10x Cable hembra-macho 20cm - Kit de diodos LED - 20 unidades ( 5x rojo, 5x verde, 5x amarillo, 5x blanco) Resistencias:
- 220R- 10 unidades
- 10k- 5 unidades
- 1k-   5 unidades
- Transistor TIP120 TO-220 - 1 unidad
- Diodo LED RGB - 1 unidad
- Condensador electrolítico 470uF/50V - 2 unidades check it Content:
- Prototype plate 400 points
- 20x Cable Jumper mach-macho
- LED diode kit - 30 units (10x red, 10x green, 10x yellow) Resistances:
- 100k- 10 units
- 10k- 10 units
- 1k- 10 units
- 220R- 10 units
- Photoresistor GL5516 Type LDR 10k - 2 units
- Push buttons Omron B3F Blue, Red, White - 3 units
- 100uF / 50V electrolytic capacitor - 5 units

- The ideal kit to build a robot car
- Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included)
2WD Smart Robot Car Kit DIY features:
- Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller
Motor 2WD Smart Robot Car Kit DIY features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm
Helpful Links:
Realization of a robot manageable by Infrared

  - The ideal kit to build a robot car
- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included)   2WD Smart Robot Car Distance UNO Kit DIY features:
  - Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller   Motor 2WD Smart Robot Car Distance UNO Kit DIY features:
  - Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc

  - The ideal kit to build a robot car
- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included)   2WD Mini Smart Robot Car Distance Kit DIY features:
  - Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller   Motor 2WD Mini Smart Robot Car Distance Kit DIY features:
  - Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc

The 6 DOF - 6-axis black aluminium arm is widely used in the field of teaching, personal production and amateur education, it can be seen as a demonstration platform with multiple degrees of freedom, its power system consists of six servo motors. So the arm can move, sideways and sideways, up and down, left and right to grasp any object. It comes with 6 servos already in set.

Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white.

LED Diode Assortment Kit 40x Red Green Yellow Blue features:
  
- Lens color: Red, green, yellow, blue -difused
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.2V-3.4V
- Anode (A): Positive (long leg): 28mm
- Cathode (K): Negative (shorter leg): 25 mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: + 260ºC
- Quantity: 40 units
      - 10x red
      - 10x green
      - 10x yellow
      - 10x blue

Kit electronic components for Arduino UNO Mega.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x Protoboard Breadbord 400 points Arduino
- 20x Male-Male Cables 20cm Jumpers Dupont 2,54
- 1x LED Diode Assortment Kit 30 pcs 5mm red, green, yellow
- Resistors:
 - 10x Resistors 200R Ohm 5% 0,25W 1/4W
 - 10x Resistors 1K Ohm 5% 0,25W 1/4W
 - 10x Resistors 10K Ohm 5% 0,25W 1/4W
 - 10x Resistors 100K Ohm 5% 0,25W 1/4W
- 2x Photoresistor GL5516 LDR
- Push switch buttons:
 - 1x Push Switch Button B3F Omron Blue Key 12mm

The Starter kit does not contain Raspberry PI. The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

Soldering Station 48W + Soldering Set features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 450 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

Learn how to weld in the most fun and useful way with this luminous Christmas tree. Follow our practical and simple guide step by step, and decorate your home with this flashing Christmas tree. Soldering is an essential technique in electronics and what better way to learn than with this specially prepared kit. Includes soldering iron, tin, pliers, desoldering iron, sponge, support and tree kit. Soldering kit comes in a practical and convenient case box.

Learn how to weld in the most fun and useful way with this luminous Christmas tree. Follow our practical and simple guide step by step, and decorate your home with this flashing Christmas tree. Soldering is an essential technique in electronics and what better way to learn than with this specially prepared kit. 

Its 7 colour RGB LEDs change colour and flash, illuminating any surface in an innovative way for Christmas.

Basic Kit Soldering Iron 40W + Tin Roll + Mesh + Support Free Soldering Kit features:
- Tin soldering iron 40W 230V
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long tip length 1mm
- Anti-thermal handle
- Certifications CE, RoHS and TUV
- Rollo tin 10gram welding wires 1mm
- Copper mesh for desoldering 2mm / 1.5m
- FREE mini soldering iron holder

Network tool set (10 pieces) for the construction of telephone and network cabling (RJ45, RJ11, RJ12) in a practical closed case. Crimper, tester, cable detector, cable stripper, screwdrivers, Rj-45 connectors, etc.

Resistors Kit 5% 0,25W 1/4W features:
 
-1 pc - 1,0k Ohm
-1 pc - 2,2k Ohm
-1 pc - 10k Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

Resistors Kit 5% 0,25W 1/4W features:
 
-10 pcs - 100 Ohm
-10 pcs - 220 Ohm
-10 pcs - 1,0k Ohm
-10 pcs - 2,2k Ohm
-10 pcs - 4,7k Ohm
-10 pcs - 10k Ohm
-10 pcs - 100k Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

The kit contains the Mega board, the Ramps 1.4 shield and 4 A4988 controllers with heatsinks.

CNC Shield + UNO R3 CH340 +4x A4988 Stepstick 3D Printer Arduino kit features:
- Content:
* 1x UNO R3 CH340 Compatible with Arduino
* 1x CNC Shield V3
* 4x A4988 Drivers
* 4x Heatsinks for A4988
* Jumpers

GT2 Strap Kit 2m + 2x Pulley GT2 16 Teeth 6mm features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- GT2 strap made of rubber with fiberglass reinforced
- Length 2m
- Width: 6mm
- Belt height: 1.38 mm Ideal to fix on the axis of the motors of your 3D printer.

Transistor kit, 200pcs of PNP+NPN TO-92 Bipolar Transistor in a box.

BC337, BC327, 2N2222, 2N907, 2N3904, 2N3906, S8050, S8550, A1015, C1815.

Well packed and assorted in a plastic storage case. It's a great choice for your electronic projects.

MB-102 Prototype Board + 65x Jumper Cable + Power Module 3.3V 5V Arduino features:
* 65 Male-Male jumper cables:
-Cable lengths: 120mm, 150mm, 200mm, 240mm * MB-102 breadboard:
-830 Connections
-Measures 165x55x8 mm
* Module:
-Input voltage up to 12V
-Maximum current 700mA

120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:
- Length: 20cm
- Quantity: 120 cables
- Female-Female 40 units
- Male-Male 40 units
- Female-Male 40 units

Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features:
- Mounting kit
- Ceramic Peltier Cell 12V TEC1-12706
- Heatsink 12x10x25mm (hot side)
- Heatsink 60x40x25mm
- Color black or silver
- Thermal insulation 70x65mm for cell
- Fan 12V 90x90x25mm with grille
- Thermal paste 0.5g
- Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC
- Max Power: 60w
- Voltage: 12v
- Max Voltage: 15.2v
- Max Current: 6A
- Temperature Variation:

Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. 

Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit.

The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking.

DFRobot Gravity: The V2 analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing.

The pH is a value that measures acidity or alkalinity.

The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws and more. With a simple installation, your Maqueen car is ready to go.

Use this kit to turn your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! 

This play and learn kit comes with a wealth of mechanical knowledge. Come and find the most fun and interesting ways to play with Maqueen in this kit.

Turn your Maqueen into an excavator with this mechanical push kit. You can then use it for applications such as football matches, venue cleaning, etc. With a simple installation, it's ready to go. This play and learn kit comes with a wealth of mechanical knowledge, which will allow students to benefit a lot from hands-on practice. Come and find the most fun and interesting ways to play with Maqueen in this kit.

Let´s equip Maqueen with this mechanical forklift kit so he can simulate the movement of a forklift. Program it to lift an object, fork and transfer items, just like a real forklift in a factory. Compatible with Maqueen Lite and Maqueen Plus. This play and learn kit comes with a wealth of mechanical knowledge, which will allow students to benefit greatly from hands-on practice. Come and find the most fun and interesting ways to play with Maqueen in this kit.

GamePad for micro:bit V4.0 adopts a high-precision three-axis analog quantity joystick. The combination of joystick and gamepad allows you to control the direction and speed of Maqueen at the same time. In addition, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V4.0 product, we have placed the external battery box on the PCB, which is more convenient to use.

With this basic kit you will help students understand the use of electric bricks from the very beginning.

Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors for use and no soldering is required.

Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit.

The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge.

Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required.

The ELECFREAKS Ring:bit Car is a small DIY smart car powered by the BBC micro:bit. Manual installation can better exercise children's skills.

The makecode graphical programming blocks allow children to learn programming from simple to complex in a fun way.

Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required.

Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately.

The car is ready to use. All that remains is to mount the sensor and the battery holder.

Note: micro:bit board is not included, you can buy it separately.

Six cases of fun in one kit: kids can build 6 shapes, including traffic lights, brick car, temperature-controlled fans, smart desk lamp, windscreen wiper and trebuchet.

Building with this kit is just as easy as building with Lego.

Note: the micro:bit board is not included, you can buy it separately.

Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required.

The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately.

Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more.

Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors.

ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more.

The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition.

NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit.

With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project.

Note: the micro:bit board is not included, you can buy it separately.

The six+ cool projects in this kit will give children new insights into artificial intelligence while they are entertained.

Note: the micro:bit board is not included, you can buy it separately.

The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing.

With the Smart City Kit you will learn more about the IoT, the software, and the possibilities of future city scenes that are able to be built through it. You will be able to build topics such as smart parking, transport network, river level monitoring...

With the micro:bit Smart Agriculture Kit you will build items such as smart insect repelling machine, eco-friendly greenhouse, fish pond water level monitoring device and more, from which we can learn modern farming and programming and explore more possibilities to apply information technology in agriculture.

Note: the micro:bit board is not included, you can buy it separately.

With the micro:bit Smart Health Kit you will build items such as UV light detections, sitting posture reminder, alcohol detector, smart bin and more, from which we can learn how to program and how to maintain healthy living habits in a scientific way.

Turn everything into a "keyboard" thanks to the Bitboard.

Maqueen Plus V2 is the latest version of the STEAM educational robot. Maqueen Plus  (DFRobot MBT0021) is optimised with more expansion ports, a higher capacity power supply and a larger body and is fully compatible with peripheral components. This makes it an accessible STEAM robot teaching tool for primary and secondary school students.