Kit Funduino I/O Expansion starter kit for Arduino UNO

Mini UNE ATMega328 basic kit for Arduino to learn programming.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.

Starter kit with the UNO R3 module sensors in a box for Arduino.
Compatible with Arduino
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module
- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x USBASP Programmer Adapter Cable Atmega8 Atmega128 AVR
- 5x Push Switch Button B3F Omron Yellow Key
- 1x Linear 5K Potentiometer OHM kΩ

The Makey Makey clone board - economic and compatible - is small and has a USB port to connect it to a computer and alligator clips to connect other objects. Just plug, clip and play, no programming skills or cumbersome software installation required. With a set-up in seconds, your child can get inventing, whether at home or in the classroom.

The perfect Arduino sensor kit to start learning about the world of electronics with Arduino. It comes with our step-by-step guide to each sensor, as well as its libraries. 

Perfect kit to learn programming in the middle of Arduino the basic of electronics It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.  The kit does not include an Arduino board. An original Arduino board or a Chinese equivalent can be purchased separately.  

Perfect "Starter Kit Mega XL" to learn programming with arduino the basis of electronics. It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x R3 REV3 ATmega2560 16U2 Mega2560 + USB 100% Compatible - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor
- 1x fire sensor
- 3x Photoresistor GL5516 LDR
- 4x Push Switch Button B3F Omron Blue Key 12mm

UNO R3 Basic Kit ATMega328 in a box for Arduino. It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
100% Arduino compatible
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x Protoboard Breadboard 5x7cm
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 3x BC547B Bipolar Transistor NPN 50V 100mA 0.1A TO-92
- 3x BC557B Bipolar Transistor PNP 50V 100mA 0.1A TO-92
- 1x PCF8574P I/>

Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins.  Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules.

Kit electronic components for Arduino UNO Mega.
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x Protoboard Breadbord 400 points Arduino
- 20x Male-Male Cables 20cm Jumpers Dupont 2,54
- 1x LED Diode Assortment Kit 30 pcs 5mm red, green, yellow
- Resistors:
 - 10x Resistors 200R Ohm 5% 0,25W 1/4W
 - 10x Resistors 1K Ohm 5% 0,25W 1/4W
 - 10x Resistors 10K Ohm 5% 0,25W 1/4W
 - 10x Resistors 100K Ohm 5% 0,25W 1/4W
- 2x Photoresistor GL5516 LDR
- Push switch buttons:
 - 1x Push Switch Button B3F Omron Blue Key 12mm

The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel.

Discover the unlimited potential of robotics and mechanics with BRACCIO!