Thermistor NTC 5.0K 5% MF52A epoxy resin coating resistor Price €0.49 Add to cart PLA Filamento 1.75mm 0.85kg Black color negro Price €17.49 Add to cart PLA Filament 1.75mm 1kg pacific blue colour Price €17.49 Add to cart USB Cable A to Micro USB B for Arduino Leonardo, Due Price €1.59 Add to cart 1.8 inch SPI TFT LCD screen for Micro:Bit Price €10.90 Add to cart Protoboard Breadboard 400 points for Arduino Price €1.90 Add to cart 20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 Error in the product description. Report The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws and more. With a simple installation, your Maqueen car is ready to go. Use this kit to turn your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! This play and learn kit comes with a wealth of mechanical knowledge. Come and find the most fun and interesting ways to play with Maqueen in this kit. 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 €14.89 12,31 tax excl. Tax included Price €14.89 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
PLA Filamento 1.75mm 0.85kg Black color negro Price €17.49 Add to cart PLA Filament 1.75mm 1kg pacific blue colour Price €17.49 Add to cart USB Cable A to Micro USB B for Arduino Leonardo, Due Price €1.59 Add to cart 1.8 inch SPI TFT LCD screen for Micro:Bit Price €10.90 Add to cart Protoboard Breadboard 400 points for Arduino Price €1.90 Add to cart 20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 Error in the product description. Report The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws and more. With a simple installation, your Maqueen car is ready to go. Use this kit to turn your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! This play and learn kit comes with a wealth of mechanical knowledge. Come and find the most fun and interesting ways to play with Maqueen in this kit. 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 €14.89 12,31 tax excl. Tax included Price €14.89 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
PLA Filament 1.75mm 1kg pacific blue colour Price €17.49 Add to cart USB Cable A to Micro USB B for Arduino Leonardo, Due Price €1.59 Add to cart 1.8 inch SPI TFT LCD screen for Micro:Bit Price €10.90 Add to cart Protoboard Breadboard 400 points for Arduino Price €1.90 Add to cart 20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 Error in the product description. Report The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws and more. With a simple installation, your Maqueen car is ready to go. Use this kit to turn your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! This play and learn kit comes with a wealth of mechanical knowledge. Come and find the most fun and interesting ways to play with Maqueen in this kit. 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90
USB Cable A to Micro USB B for Arduino Leonardo, Due Price €1.59 Add to cart 1.8 inch SPI TFT LCD screen for Micro:Bit Price €10.90 Add to cart Protoboard Breadboard 400 points for Arduino Price €1.90 Add to cart 20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 Error in the product description. Report
1.8 inch SPI TFT LCD screen for Micro:Bit Price €10.90 Add to cart Protoboard Breadboard 400 points for Arduino Price €1.90 Add to cart 20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90 Error in the product description. Report
Protoboard Breadboard 400 points for Arduino Price €1.90 Add to cart 20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90
20x Electrolytic Capacitor 220uF 16V Price €0.10 Add to cart 40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90
40x Male to male cables 10cm Price €1.99 Add to cart 10 other products in the same category Previous Next Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99 Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99 Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50 Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49
Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99
Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99
Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90
ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50
Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 Available Price €4.50
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Price €69.90
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49
Smart Cutebot : Smart car robot kit for micro:bit Elecfreaks Cutebot is a car with a dual-speed motor and smart coding that packs a lot of power. Children can learn micro:bit from simple to complex. They use programming to get what they want. Enhances children's interest in programming. Note: the micro:bit board is not included, you can buy it separately. The car is ready to use. All that remains is to mount the sensor and the battery holder. Note: micro:bit board is not included, you can buy it separately. Code EL0103 Backorder Price €39.99
Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99
Micro:bit Tinker Kit Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Price €91.90
ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Price €26.50
Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 Last items in stock Price €79.90