Aluminum Heat Sink 10x2.5cm Power LED 3W 5W The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high. Code P0049 Available Price €3.49
W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.79
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Power Supply Transformer 220V AC/DC 2A 12V Power Supply Transformer 220V AC/DC 2A 12V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 12V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0015 Available Price €4.79
Transparent Box for W1209 DIY Transparent Box for W1209 DIY features: For W1209 Thermostat DC 12V temperature controller Code M0107 Available Price €2.65
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Heat Shrinkable Tube 5 Colors 3 Meters Package Heat Shrinkable Tube 5 Colors 3 Meters Package features: - Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas. - These heat shrink tubes are very flexible and of high quality. Made in EU - Different sizes of 20 cm each are delivered: * 1,6mm: black, brown, red, yellow, orange * 2,4mm: black, brown , red, yellow, blue * 3,2mm: black, brown, red, yellow, blue - Quantity: 15 units - Material: polyolefin - Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter) - Minimum shrinkage temperature: 115 ° C maximum 200 ° C Code K0047 Available Price €1.95
15x Electrolytic Capacitor 10uF 25V 105ºC PIC for Arduino 15x Electrolytic Capacitor 10uF 25V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 10uF-Maximum tension: 25V-Maximum temperature: 105º C-Dimensions: 5x11mm-Quantity: 15 units Code D0039 Available Price €0.09
Peltier Ceramic Cell TEC1 12706 12V 60W Peltier Ceramic Cell TEC1 12706 12V 60W features: - Max Power: 60w - Voltage: 12v - Max Voltage: 15,2v - Max Current: 6A - Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC Code M0055 Available Price €3.95
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Peltier Ceramic Cell TEC1-12702 12V 2A Characteristic: - Max Power: 24w - Voltage: 12v - Max Current: 2A - Cooling capacity 17.7W - Temperature variation: Code M0051 Available Price €6.99
Célula 12V + Pasta térmica + Aislante Peltier TEC1-12706 M0057 Kit includes thermal insulation for peltier cell, thermal paste and TEC1-12706 12V ceramic peltier cell. Code M0057 Available Price €5.13
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Célula 12V + Pasta térmica + Aislante Peltier TEC1-12706 M0057 Kit includes thermal insulation for peltier cell, thermal paste and TEC1-12706 12V ceramic peltier cell. Code M0057 Available Price €5.13
Peltier Ceramic Cell TEC1-12702 12V 2A Characteristic: - Max Power: 24w - Voltage: 12v - Max Current: 2A - Cooling capacity 17.7W - Temperature variation: Code M0051 Available Price €6.99
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Peltier Ceramic Cell TEC1 12706 12V 60W Peltier Ceramic Cell TEC1 12706 12V 60W features: - Max Power: 60w - Voltage: 12v - Max Voltage: 15,2v - Max Current: 6A - Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC Code M0055 Available Price €3.95