Grease TF silicone + PTFE 20g
  • Grease TF silicone + PTFE 20g

Grease TF silicone + PTFE 20g

Q0093

Silicone and Protective Grease with Teflon 20g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 20g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

Termopasty
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Silicone and Protective Grease with Teflon 20g features:


- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
-

Silicone and Protective Grease with Teflon 20g features:


a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

Data sheet

Tipo
Grasa
Volumen [ml]
20

Customers who bought this product also bought

Vertical Slide Switch 2P2T 50V 0.5A

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 2P2T 50V 0.5A features:
- Type: 2P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

K0104

Price €0.40

3A DC Converter 4-53V Adjustable LM2596H Step Down Source

Wide range of voltages, improved version.
Drop module.
They will use a multimeter to Check the output voltage and adjust the potentiometer.
3A DC Converter 4-53V Adjustable LM2596H Step Down Source features:

- Based on the LM2596HVS-ADJ regulator
- Rectification: Asynchronous
- Output Voltage: 3v ~ 40v DC (adjustable)
- Input Voltage: 4.5v - 53v DC
- Max Output Current: 3A (with heat sink)
- Ripple in output voltage: 30mV
- Frequency: 150KHz
- Max Conversion Efficiency: 92%
- Load Regulation: ± 0.5% - Voltage Regulation: ± 2,5%
- Operating temperature: -40ºC to + 85ºC
- Measurements: 43x 21x 14 mm

A0018

Price €2.31

DRV8825 + Radiator Stepstick Stepper Driver Motor Pololu 3D Printer

It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations.
Characteristic:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 45 V
- Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32
- Factory soldered temples
- 4-layer PCB, 2 oz. Copper for improved heat dissipation
- Short-circuit and overtemperature protection - Use potentiometer to adjust the current
- Measurements: 20x16x12 mm

I0012

Price €2.88

Speed controller for AC motor 50-220VAC 2000W 10A

Characteristic: - Voltage regulator 50-220V AC 2000W
- Ideal to control the speed of AC motors
- Allows adjustment the output voltage between 50V and 220V
- Input voltage: 220V AC
- Regulation range: 50V to 220V AC
- Max current: 10A
- Max power.: 2000W
- Dimensions: 47 x 35 x 27mm

A0020

Price €3.21

5x Bearing 608ZZ 8mm RepRap 3D Printer

5x Bearing 608ZZ 8mm RepRap 3D Printer features:

- Ball Bearing 3D Printer Reprap Prusa
- Measurements:
Inside diameter D: 8mm
Outside diameter D: 22mm
Width - dimension B: 7mm
- Quantity: 5 units

I0108

Price €0.65

Electrical Contacts Cleaner Spray Kontakt S 60ml

A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - Made in EU
- No to the most usual materials of electrical systems

Q0019

Price €2.06
€2.80

2,80 tax excl.

1
Last item
Price €2.80

Order until 4pm we will send today
30 days return