Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Price €2.49
Potentiometer Cleaner - Spray 60ml Potentiometer Cleaner - Spray 60ml features: A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them. Code Q0030 Backorder Price €2.99
Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Backorder Price €11.29
Technical Vaseline for Contacts and Bearings 35g - The electrical products and lubricants of the bearings- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features: - Solid product- White color- Specific smell- Melting point: 56 °C- Ignition temperature: 220 °C- Density at 20 °C: 822 kg / m3- Maximum temperature of use: 30 °C- Solubility in water: partial Code Q0081 Available Price €1.00
PVB Varnish 60 Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 Available Price €3.15
Flux Varnish LT-4 Plate Protector - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €5.95
Graphite Varnish 2x1.5ml Graphite Varnish 2x1.5ml features: - Can be used for the elimination of discontinuities in the graphite layer in printed circuits- Creation or reconstruction of routes in printed circuits of low intensityProtection of silver contacts from harmful direct contact of silver with rubber (in remote controls)- The packaging comprises two bottles, one with graphite varnish and the other with diluent (ethyl acetate)- High quality - manufactured in EU- Capacity: 2x1,5ml Code Q0073 Available Price €4.50
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color.The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB features: - Manufacturer: TermoPasty,- Na‚‚O content: ‰¥29%,- SiO‚‚ content: ‰¥28%,- Substances not dissolved in H‚‚O: 0%,- Whiteness: 97%,- Iron: 45 ppm,- Apparent density: 0.98g / cm³. Mode of use: - Store in airtight containers in dry, well-ventilated areas away from sources of heat and ignition.- Do not store together with flammable substances. Applications: - Developer of photos,- developer for PCB electronic boards. Content: Code Q0094 Backorder Price €2.49
Technical Petroleum Jelly with Dispenser 65ml Technical Petroleum Jelly with Dispenser 65ml features: - Used for protecting electric contacts, lubricating bearings- Max. operating temperature: 30°C Code Q063 Available Price €4.19
Vaseline Technical Grease 20g Vaseline Technical Grease 20g features:- Lubricates moving surfaces, bearings,- Protects metal parts against corrosion and electrical contacts- Protects and preserves rubber and plastic- It can be used as mounting grease- Eliminates squeaks- Reduces and decreases friction Code Q0064 Available Price €1.80
Insulating Varnish Spray 100ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0117 Available Price €3.89
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Backorder Price €11.29
Technical Vaseline for Contacts and Bearings 35g - The electrical products and lubricants of the bearings- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features: - Solid product- White color- Specific smell- Melting point: 56 °C- Ignition temperature: 220 °C- Density at 20 °C: 822 kg / m3- Maximum temperature of use: 30 °C- Solubility in water: partial Code Q0081 Available Price €1.00
PVB Varnish 60 Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 Available Price €3.15
Flux Varnish LT-4 Plate Protector - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €5.95
Graphite Varnish 2x1.5ml Graphite Varnish 2x1.5ml features: - Can be used for the elimination of discontinuities in the graphite layer in printed circuits- Creation or reconstruction of routes in printed circuits of low intensityProtection of silver contacts from harmful direct contact of silver with rubber (in remote controls)- The packaging comprises two bottles, one with graphite varnish and the other with diluent (ethyl acetate)- High quality - manufactured in EU- Capacity: 2x1,5ml Code Q0073 Available Price €4.50
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color.The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB features: - Manufacturer: TermoPasty,- Na‚‚O content: ‰¥29%,- SiO‚‚ content: ‰¥28%,- Substances not dissolved in H‚‚O: 0%,- Whiteness: 97%,- Iron: 45 ppm,- Apparent density: 0.98g / cm³. Mode of use: - Store in airtight containers in dry, well-ventilated areas away from sources of heat and ignition.- Do not store together with flammable substances. Applications: - Developer of photos,- developer for PCB electronic boards. Content: Code Q0094 Backorder Price €2.49
Technical Petroleum Jelly with Dispenser 65ml Technical Petroleum Jelly with Dispenser 65ml features: - Used for protecting electric contacts, lubricating bearings- Max. operating temperature: 30°C Code Q063 Available Price €4.19
Vaseline Technical Grease 20g Vaseline Technical Grease 20g features:- Lubricates moving surfaces, bearings,- Protects metal parts against corrosion and electrical contacts- Protects and preserves rubber and plastic- It can be used as mounting grease- Eliminates squeaks- Reduces and decreases friction Code Q0064 Available Price €1.80
Insulating Varnish Spray 100ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0117 Available Price €3.89