Motor Nema 17 4.28kg 17HS4401 Price €13.50 Add to cart Power Supply 12V 30A 360W Price €28.95 Add to cart Flat Cable 1m AWG28 1.27 10 Pins Colors Price €3.74 Add to cart Connectors BLS01 Female/Female 1 Pin RoHS Single Row pack 20pcs Price €0.09 Add to cart 5x Strip Simple Row Male 40 Pins Header Various Colors Price €1.29 Add to cart 2x Female to Female Cable 3 Pins 3 Colors Price €0.90 Add to cart Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 Error in the product description. Report Ceramic Grease Spray Non-stick Antifriction 100ml features: The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application: - Installation of boilers, furnaces, motors, heating systems, water pumps- Exhausts, manifold mounting screws, heads, hubs- Breaking systems, ABS, ASR and ESP systems 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 €3.85 3,18 tax excl. Tax included €3.85 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Power Supply 12V 30A 360W Price €28.95 Add to cart Flat Cable 1m AWG28 1.27 10 Pins Colors Price €3.74 Add to cart Connectors BLS01 Female/Female 1 Pin RoHS Single Row pack 20pcs Price €0.09 Add to cart 5x Strip Simple Row Male 40 Pins Header Various Colors Price €1.29 Add to cart 2x Female to Female Cable 3 Pins 3 Colors Price €0.90 Add to cart Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 Error in the product description. Report Ceramic Grease Spray Non-stick Antifriction 100ml features: The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application: - Installation of boilers, furnaces, motors, heating systems, water pumps- Exhausts, manifold mounting screws, heads, hubs- Breaking systems, ABS, ASR and ESP systems 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 €3.85 3,18 tax excl. Tax included €3.85 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Flat Cable 1m AWG28 1.27 10 Pins Colors Price €3.74 Add to cart Connectors BLS01 Female/Female 1 Pin RoHS Single Row pack 20pcs Price €0.09 Add to cart 5x Strip Simple Row Male 40 Pins Header Various Colors Price €1.29 Add to cart 2x Female to Female Cable 3 Pins 3 Colors Price €0.90 Add to cart Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 Error in the product description. Report Ceramic Grease Spray Non-stick Antifriction 100ml features: The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application: - Installation of boilers, furnaces, motors, heating systems, water pumps- Exhausts, manifold mounting screws, heads, hubs- Breaking systems, ABS, ASR and ESP systems 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79
Connectors BLS01 Female/Female 1 Pin RoHS Single Row pack 20pcs Price €0.09 Add to cart 5x Strip Simple Row Male 40 Pins Header Various Colors Price €1.29 Add to cart 2x Female to Female Cable 3 Pins 3 Colors Price €0.90 Add to cart Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 Error in the product description. Report
5x Strip Simple Row Male 40 Pins Header Various Colors Price €1.29 Add to cart 2x Female to Female Cable 3 Pins 3 Colors Price €0.90 Add to cart Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79 Error in the product description. Report
2x Female to Female Cable 3 Pins 3 Colors Price €0.90 Add to cart Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79
Flange Bearing F608zz for RepRap Prusa 3D Printer Price €1.29 Add to cart Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79
Dupont Connector 2.54mm Female Price €2.19 Add to cart 10 other products in the same category Previous Next Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79 AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85 AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20 Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85 Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99 Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69 Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79
Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79
AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85
AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20
Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85
Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99
Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79
Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09
Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69
Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79
Grease preparation for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers.Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties.The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite.It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Grease preparation for dampers 100ml features: - Manufacturer: TermoPasty,- Density: 0.50g / cm3,- Reddish brown color. Mode of use: - Store in a cool and well-ventilated place. Code Q0098 Last items in stock Price €3.79
AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €10.85
AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste.Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator.Pasta is the best alternative for overlockers. AG Gold thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 2.8 W / mK,- Thermal impedance: <0.095 ° C in2 / W- Specific gravity:> 2.5g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Thixotropic index: 380 +/- 10,- Working temperature from -30ºC to + 300ºC, Code Q0090 Last items in stock Price €4.20
Silicone and Protective Grease with Teflon 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 Available Price €6.85
Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99
Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Price €4.49
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79
Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09
Silicone and Protective Grease with Teflon 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Available Price €3.69
Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity.It is designed to seal threaded connections in high pressure conditions and at elevated temperatures.Provides easy assembly and disassembly of connections.Prevents the seizure of threaded connections.In operation, the grease exhibits very good properties of adhesion to the surface.Protects against rust and corrosion. Provides good resistance to oxidation.Waterproof. Assembling lubricant 100ml features: - Manufacturer: TermoPasty, Mode of use: - Store in a cool and well-ventilated place. Get away from the children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0099 Available Price €3.79