Flux Welding Paste 20g
  • Flux Welding Paste 20g

Flux Welding Paste 20g

Q0025

Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C.
- Flux paste based on activity rosin medium.
- Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints .
Operating temperature up to 350 C.

Termopasty
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Characteristic:

- Solder paste according to DIN EN 29454-1 1.1.2.C.
- Flux paste based on activity rosin medium.
- Easy to weld: copper, silver, zinc and nickel plated.

Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints .
Operating temperature up to 350 C.

Customers who bought this product also bought

L7805 Voltage Regulator 5V 1.5A TO-220

L7805CV Voltage Regulator 5V 1.5A TO-220 features:
-Type Output: Fixed
-Voltage Output: 5V
-Manufacturer: ST Microelectronics
-Output current: 1.5A
-Max input voltage: 35V
-Input input min.: 5V
-Operational temperature: 0ºC to + 125ºC
-Encapsulated: TO-220
-Polarity: Positive

T0022

Price €0.32

2 Channel Relay Module 5V 10A for Arduino

2 Channel Relay Module 5V 10A for Arduino features:
- 5V relay module with 2 optocoupled channels
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- LED indicator: For each channel
- Dimensions: 40x 50mm

RL006

Regular price €1.64 -€0.35 Price €1.29

Infrared LED Flame Sensor 5mm

Led infrared sensor.
Detector of the source of fire or flame, can detect a flame or wavelength 760 nm-1100 nm
Particularly sensitive to the flame spectrum.
This optical flame sensor is a device that detects the existence of combustion by the light emitted by it.
Infrared LED Flame Sensor 5mm features:
- Range of light, Distance of 80 cm.
- Angle detection of about 60 degrees,
- This light can be detected by an optical sensor,
- Can be captured by digital inputs and analog inputs of Arduino.

S0132

Price €0.37

Rechargeable Battery Sanyo NCR18650GA 3450mAh Li-ion 3,6V 10A

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 3450mAh (0.2C, discharge of 2.5V)
- Minimum capacity: 3350mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1675mA,
- Max. Discharge current: 10A (ambient temperature 25 °)
- Charging time: standard charge: 4 hours,
- Discharge cut-off voltage: 2.5V
- Cell weight: 47g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum

PP031

Price €7.85

DHT22/AM2302 Temperature Sensor Humidity PCB + Digital Cable for Arduino

- The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree
Characteristic:
- Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy
- Maximum sampling rate: 2 seconds
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Write texts on the OLED 0.96 '' screen
- Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen
Send />

M0099

Regular price €5.36 -€2.00 Price €3.36

CNC Shield Expansion Plate V3 Engraver 3D Printer

CNC shield for arduino works as a controller for CNC type milling machines,
3D printers, laser cutters .
CNC Shield Expansion Plate V3 Engraver 3D Printer features:

  • 4 compatible sockets for use of A4988 stepper motor controllers (PAP), DRV8825, other compatible
  • 4 support axes X, Y, Z, A
  • 2 limit switches for each axis (6 in total)

I0011

Price €2.27
€1.56

1,56 tax excl.

1
25 items
Price €1.56

Order until 4pm we will send today
30 days return