Raspberry Pi Pico (With Soldered Header) The first Raspberry microcontroller with the proprietary RP2040 chip and a dual-core Arm Cortex-M0+, the Foundation's cost-effective yet highly flexible solution. Designed for high performance and with a high degree of digital interfaces. Programming in C/ C++ and MicroPython. Code RA131 ✗ Out-of-Stock Price €6.60
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 ✗ Out-of-Stock Price €10.70
Integrated Circuit Supports DIP8 Width 10.16 mm Integrated Circuit Supports DIP8 Width 10.16 mm features: - Type: DIP DIL- Total number of pins: 8- Step between pins: 2.54 mm- Material: Polybutylene terephthalate- Length: 7.62 mm- Width: 10.16 mm- Temperature min .: -25 °C- Max temperature: +85 °C- RoHS compliant Code Z0005 Available Price €0.08
10x Electrolytic Capacitor 100 uF 50V 105ºC for Arduino 10x Electrolytic Capacitor 100 uF 50V 105ºC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 100uF-Maximum tension: 50V-Maximum temperature: 105º C-Dimensions: 6x11mm-Quantity: 10 units Code D0045 Available Price €0.12
Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm features:- Code H0168 Last items in stock Price €4.95
Photoresistor GL5516 LDR 10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features: - Model: GL5516- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 90mW.- Resistance with light (10lux): 5-10KΩ- Resistance with darkness (0lux): 0.5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0012 Available Price €0.12
3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module. In the case of a battery pack, the BMS (Battery Management System) balancing protection circuit allows charging and discharging to be individually controlled. That is, the circuit controls that all cells are charged and discharged at approximately the same voltage. The current during charging should be limited, because the cell will "absorb" the current given to it, but a higher current than the one established by the manufacturer (generally a safe current is 1C ) can cause the cell to overheat and, in extreme cases, explode. The same relationship also applies to discharge. Code A0106 Available Price €3.71
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €1.89
Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 ✗ Out-of-Stock Price €3.55
Compressed Gas 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €3.26
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.06
Ethyl alcohol 5L disinfectant for surfaces A bottle of 5000ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0112 ✗ Out-of-Stock Price €20.65
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €10.70
Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - manufactured in EU Code Q0028 ✗ Out-of-Stock Price €5.78
Water-Based Cleaner PCB 1L Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 ✗ Out-of-Stock Price €4.88
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €8.22
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.62
Ethyl alcohol 500mL disinfectant for surfaces A bottle of 500ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0113 Available Price €3.71
Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 ✗ Out-of-Stock Price €3.55
Compressed Gas 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €3.26
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.06
Ethyl alcohol 5L disinfectant for surfaces A bottle of 5000ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0112 ✗ Out-of-Stock Price €20.65
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €10.70
Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - manufactured in EU Code Q0028 ✗ Out-of-Stock Price €5.78
Water-Based Cleaner PCB 1L Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 ✗ Out-of-Stock Price €4.88
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €8.22
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.62
Ethyl alcohol 500mL disinfectant for surfaces A bottle of 500ml ethyl alcohol in Liquid, contains 70% ethanol. Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use. Code Q0113 Available Price €3.71