Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €9.08
Fan 12V 2x Cables PC CPU case Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 15mm Code I0055 Available Regular price €2.88 -€0.90 Price €1.98
Fan 12V 2x 3D Printer Cables Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 65mA - Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 11cm - Dimensions: 40mm x 40mm x 10mm Code I0026 Available Price €1.31
Double-Sided Adhesive Tape 5mm 50m Double-Sided Adhesive Tape 5mm 50m features: - Transparent double-sided adhesive tape, 5mm wide and 50m long- After its removal it leaves no residue- Given its versatility it will allow multiple use options Code I0147 Last items in stock Price €2.40
2x Spring Tensioning Strap Printer 2x Spring Tensioning Strap Printer features: - Use with 6mm strap - Timing Belt GT2 Tensioner Spring for RepRap Prusa Mendel 3D printer - Fits 3D printer timing belt system - Fits belt width: less than or equal to 6mm - Constant force to keep belt reasonably tight to avoid losing steps, skipping steps or unwanted movements - Material: Metal - Silver color - Size: 12 x 12 x 8 mm (length x width x height) - Quantity: 2 units Code I0048 Available Price €0.29
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Last items in stock Price €9.88
Micro Bits for 3D Printer Nozzle pack 10pcs Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC Characteristic: - Diameter: 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.2 mm - Shank diameter approx . 3.2mm - Total length approx. 38mm - Material: Steel - Quantity: 10 units Code I0110 Available Price €4.12
4x Springs Leveling Hot Bed 3D Printer 4x Springs Leveling Hot Bed 3D Printer features: 3D Springs printer Bed level extruder for RepRap Prusa Mendel - A strong spring for 3D Printer Extruder- Excellent elasticity, resistance to fatigue- Nickel plating, corrosion resistance, high hardness- Material: Carbon steel- Outside diameter: 7.5mm- Inner diameter: 5 mm- Spring height: 20 mm- Quantity of the ring: 9 rings- Surface treatment: Nickel-plating Code I0049 Available Price €0.32
Spray Contact Cleaner Kontakt S 300ml Spray Contact Cleaner 300ml features:A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections- Has cleaning properties- Used in audio technologies- Protection against moisture and corrosion- Prevents stray current Code Q0023 ✗ Out-of-Stock Price €3.96
Flux BORAX 500g Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides. Code Q0066 ✗ Out-of-Stock Price €3.26
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.62
Microfiber Cleaning Cloth Microfiber Cleaning Cloth features: - Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges Code Q0067 Last items in stock Price €2.31
Water-Based Cleaner PCB 1L Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 ✗ Out-of-Stock Price €4.88
Potentiometer Cleaner - Spray 60ml Potentiometer Cleaner - Spray 60ml features: A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them. Code Q0030 ✗ Out-of-Stock Price €2.44
Compressed gas 600ml Spray Cleaner Compressed gas 600ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0101 Available Price €5.45
Compressed Gas 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €3.26
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.06
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €10.70
Spray Contact Cleaner Kontakt S 300ml Spray Contact Cleaner 300ml features:A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections- Has cleaning properties- Used in audio technologies- Protection against moisture and corrosion- Prevents stray current Code Q0023 ✗ Out-of-Stock Price €3.96
Flux BORAX 500g Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides. Code Q0066 ✗ Out-of-Stock Price €3.26
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.62
Microfiber Cleaning Cloth Microfiber Cleaning Cloth features: - Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges Code Q0067 Last items in stock Price €2.31
Water-Based Cleaner PCB 1L Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 ✗ Out-of-Stock Price €4.88
Potentiometer Cleaner - Spray 60ml Potentiometer Cleaner - Spray 60ml features: A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them. Code Q0030 ✗ Out-of-Stock Price €2.44
Compressed gas 600ml Spray Cleaner Compressed gas 600ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0101 Available Price €5.45
Compressed Gas 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €3.26
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.06
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €10.70