Flux Solder Paste in Tin Can 40g

Flux Colophony Rosin Core 100g features:
Flux rosin, solid resin, neutral ph for correct electronic welding.
-Does not cause corrosion of non-ferrous metals
-Does not cause short circuits
-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners
-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics works
Use a toothpick for the application. Do not apply in excess.
SECURITY:
-Use in ventilated spaces. Do not inhale vapors that are released when welding
-Keep the pot tightly closed and out of reach of children
-Do not eat. It is not toxic
-Rarely irritating to skin contact

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

Aqueous PCB cleaner
Water-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.
It causes the saponification of the rosin and the dissolution of the flow residues.
Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.
Does not attack metal and aluminum surfaces.
Water-Based Cleaner PCB features:
- Type of chemical preparation: aqueous stripper of PCB printed plates
- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components
- Form: Liquid
- Capacity: 1l

Magnifying LED Lamp Lens 5 Inch features:
- 80 Leds, diopter 5D
- Lens size: 5 inch
- Lens material: glass
- Light source: 80 pcs LED
- Standard mount: table clamp

Type of chemical preparation: alcoholic stripper of printed PCB plates.
Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.
has low impact on electronic components.
Alcohol PCB Cleaner 1l features:
- Form: liquid
- Capacity: 1l
- Alcohol PCB cleaner
PCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.
The liquid does not affect the substrate or components of the circuit board.

Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip.

Liquid Flux 50ml Solder Colophony Alcohol Base features:
- Liquid Flux alcohol-based for electronic welding
- Type of flux: Colophony
- No Clean, Lead Free, Non-conductive
- Form: liquid
- Type of packaging: bottle
- Use of welding equipment to tin elements coated with polyurethane varnishes
- Properties of welding equipment can be washed with alcohol-based agents
- Content of solid bodies: 24%
- Density (at a temperature of 20 ° C): 0.86g / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.
It cleans easily with alcohol.

SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features:
Flux liquid alcohol-based for electronic welding.
Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
Form: liquid
Capacity: 50ml
Content of solid bodies: 0 ... 5%
Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.
It cleans easily with alcohol.
It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.
- Keep the boat tightly closed and far away from the children.
- Use in ventilated spaces.

It is a very ideal tool when the third hand is required.
Helping Magnifying Hand Tool features:
- Magnifying glass diameter 60mm
- Weight: 0.5kg
- Dimensions: approx. 15 (26) x 17 x 7cm 

Spare tip C1-4 Ø 2.0mm soldering station 48W features:
- Tip C1-4,
- Length: 65mm,
- Quantity : 1 pc.