BME280 Digital Temperature Humidity Barometric Pressure Module This module includes the component BME280 that is translated into a digital signal.The equipment uses the two I2C and SPI interfaces. The BME280 does not allow the module to be used as an altimeter as opposed to its successor BMP280.Its 5-pin straight connector allows easy connection to other electronic boards. BME280 Digital Temperature Humidity Barometric Pressure Module features: - Interfaces:- I2C (up to 3.4 MHz)- SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range:- Temperature: -40ºC to + 85ºC- Humidity: 0-100%- Pressure: 300-1100 hPa- Resolution of the measures:- Temperature: 0.01ºC- Humidity: 0.008%- Pressure: 0. 18Pa- Accuracy of the measures:- Temperature: +/> Code M0135 ✗ Out-of-Stock Regular price €14.95 -€5.00 Price €9.95
Fiberflex 30D Filamento 1.75mm 0.85kg Blue color azul Premium Bobina para Impresora 3D Code I0424 Backorder Regular price €38.60 -20% Price €30.88
Logic Level Converter 3.3 / 5V I2C IIC 3.3V/5V I2C logic level converter module with soldering pins.Ideal to connect a device that works at 3.3V to one that works with 5V.It works with digital signals (high and low levels).Logic Level Converter 3.3 / 5V I2C IIC features:- Voltage: 3.3V/5V- Measures: 1.5x 1 cm Code C0004 Available Price €1.69
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
Scalpels, modelling knives - set of 13 blades and 3 handles. A set of modelling scalpels for delicate (plastic fixings), precision work. The set includes 3 handles and 13 very sharp blades in various shapes. Quick and effortless exchange of blades and handles. Code H0555 Available Price €6.99
Rechargeable Battery Samsung ICR18650 2600mAh Li-ion Characteristic: - Lithium Battery WITHOUT Protection - Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V) - Minimum capacity: 2550mAh (0.2C, 2.75V discharge) - Charging voltage: 4.2 ± 0.05 V - Nominal voltage: 3.63V - Charging method: DC-CV (constant voltage with current limited) - Charging current: standard charge: 1300mA, fast charge: 2600mA - Charging time: standard charge: 3 hours, fast charge: 2.5 hours - Max. Charging current: 2600mA (ambient temperature 25 °) - Max. Discharge current: 5200mA (ambient temperature 25 °) - Discharge cut-off voltage: 2.75V - Cell weight: 47.0g maximum - Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max. Code PP018 ✗ Out-of-Stock Price €5.99
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49
Flux Colophony Rosin Core 100g Flux Colophony Rosin Core 100g features:Flux rosin, solid resin, neutral ph for correct electronic welding.-Does not cause corrosion of non-ferrous metals-Does not cause short circuits-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics worksUse a toothpick for the application. Do not apply in excess.SECURITY:-Use in ventilated spaces. Do not inhale vapors that are released when welding-Keep the pot tightly closed and out of reach of children-Do not eat. It is not toxic-Rarely irritating to skin contact Code Q0012 Last items in stock Regular price €5.89 -€0.50 Price €5.39
Tin dispenser for solder reel Solder dispenser for convenient and faster soldering. Easily supplies you with solder in a fixed structure. Code H0187 Available Price €4.99
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €11.49
Antistatic Desoldering Pump Nozzle Antistatic Desoldering Pump Nozzle features: - Manual desoldering suction- Replacement nozzle for manual tin vacuum cleaner- Quantity: 1 unit Code H0024 Available Price €0.79
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €5.79
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Magnifying LED Lamp Lens 4 Inch Magnifying LED Lamp Lens 4 Inch features: - Diopter: 3D + 12D- Lens size: 4 inch- Lens material: glass- Light source: 15pcs LED- Standard mount: table base Code H0144 Available Regular price €30.00 -15% Price €25.50
Desoldering Wire 3mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 3mm features:- Material: Copper- Length: 1.5m- Width: 3mm Code H0008 Available Price €1.79
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
Flux Gel RMA 100cm3 Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0116 ✗ Out-of-Stock Price €19.89
Antistatic Desoldering Pump Nozzle Antistatic Desoldering Pump Nozzle features: - Manual desoldering suction- Replacement nozzle for manual tin vacuum cleaner- Quantity: 1 unit Code H0024 Available Price €0.79
Flux BORAX 500g Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides. Code Q0066 ✗ Out-of-Stock Price €3.95
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0002 ✗ Out-of-Stock Price €3.95
Silicone welding mat with departments - AS19 350 x 250 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0214 Last items in stock Price €13.50
Soldering Iron Holder Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip. Code H0576 Available Price €3.99
Soldering Iron Tip Cleaner Ball Soldering tip cleaner allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip. Code H0198 ✗ Out-of-Stock Price €2.99
Magnifying LED Lamp Lens 5 Inch Magnifying LED Lamp Lens 5 Inch features: - 80 Leds, diopter 5D- Lens size: 5 inch- Lens material: glass- Light source: 80 pcs LED- Standard mount: table clamp Code H0143 Available Regular price €60.00 -5% Price €57.00
Soldering Iron Stand Holder Soldering Iron Stand Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Base dimensions: 78 x 110 mm- Weight 0.4kg Code H0016 Available Price €6.95
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €6.75
Flux Solid Resin Rosin 20g Flux rosin, solid resin, neutral pH for correct electronic soldering - They do not cause corrosion of non-ferrous metals - Does not cause short circuits Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs. Use a toothpick for the application. Do not apply excessively. Safety: - Use in ventilated spaces. Do not inhale the fumes that are given off by welding. - Keep the bottle tightly closed and out of the reach of children. - Do not ingest. Non-toxic - Rarely irritating to skin contact Code Q0010 Available Price €1.69