Rain Sensor Module Water Droplet Detector The module has two outputs: analog A0 and digital D0. digital output D0 - signal 0 or 1 appears depending on the configuration of threshold. The threshold is fixed with the potentiometer. Characteristic: - Operating voltage: 3.3V -5 V - Sensitivity adjustable by potentiometer - Dual output mode: analog and digital - Red LED - power indicator - Green LED - digital switching output indicator - Measurements PCB: 3 x 1.5 cm - Sensor measurements: 5.4 x 3.9 cm Code S0022 Available Price €1.69
Led Matrix 8x8 MAX7219 Soldier Led Matrix 8x8 MAX7219 Soldier features: - MAX7219 controller module with 8x8 led matrix + cables - 8X8 LED matrix controlled by MAX7219 chip - Led 3mm red color - SPI communication - Voltage: 4.7 - 5.3V DC - Interfaces to manage multiple modules in cascade - Matrix dimensions: 32mm x 32mm x 8mm - PCB dimensions: 32mm x 50mm Code M0043 Available Price €2.95
Quartz Crystal Oscillator 16 MHz Quartz Crystal Oscillator 16 MHz features:- Low Profile Crystal Oscillator- Type: Quartz Crystal 16 MHz- Frequency: 16 MHz- Format: Low profile- Assembly: Intern Code E0012 Available Price €0.29
PVB 60 Varnish Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 ✗ Out-of-Stock Price €3.15
Relay SRD-05 DC-2P 5V 10A SPDT - SRD-05VDC-SL-C Relay SRD-05 DC-2P 5V 10A SPDT features:- Supply voltage: 5V- Output Current: 10A- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica Code RL011 Available Price €0.69
TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier features:- Package / Case: 8-DIP- Voltage - Supply (Vs): 1.8V ~ 15V- Quantity: 1 unit Code T0018 Available Price €1.49
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 1.5mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.5mm features: - 100gr. 1.5mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0105 ✗ Out-of-Stock Price €8.95
PAM8403 2x3W Digital Amplifier Channel Stereo PAM8403 2x3W Digital Amplifier Channel Stereo features: - Up to 3W in each channel- Chip: PAM8403- Power supply: 5V- Power: 2 outputs of 3 watts each- Measures: 21x18 mm- Suitable impedance speakers: 4 Ohm Code M0027 Available Price €1.89
Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm features:- Code H0168 Last items in stock Price €5.99
PCB Circuit Board Marker Pen 0.4mm for printed circuits PCB Circuit Board Marker Pen 0.4mm for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.4mm- 1 unit Code V0004 Available Price €2.79
PCB Circuit Broad Marker Pen for printed circuits - 3pcs pack 3x PCB Circuit Broad Marker Pen for printed circuits features: -Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Resistant to sunlight-Permanent resistance ink to acid attack-Quantity: 3 unitsS 0.4mm - 1 unitM 0.6mm- 1 unitL 1.0mm - 1 unit Code V0006 Available Price €7.59
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.89
Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm features:- Code H0169 Last items in stock Price €7.19
PCB Circuit Board Marker Pen 1.0mm for printed circuits PCB Circuit Board Marker Pen 1.0mm for printed circuits features: -Permanent resistance ink to acid attack-Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Does not leave stains of ink, resistant to sunlight-Quantity: 1.00mm - 1 unit Code V0003 Available Price €2.79
Sodium Persulfate - etching agent for PCB and copper - pack 100g Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. Code Q0053 Available Price €2.85
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.79
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features: Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks. Code H0021 Available Price €0.99
Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm features:- Code H0168 Last items in stock Price €5.99
PCB Circuit Board Marker Pen 0.4mm for printed circuits PCB Circuit Board Marker Pen 0.4mm for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.4mm- 1 unit Code V0004 Available Price €2.79
PCB Circuit Broad Marker Pen for printed circuits - 3pcs pack 3x PCB Circuit Broad Marker Pen for printed circuits features: -Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Resistant to sunlight-Permanent resistance ink to acid attack-Quantity: 3 unitsS 0.4mm - 1 unitM 0.6mm- 1 unitL 1.0mm - 1 unit Code V0006 Available Price €7.59
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.89
Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm features:- Code H0169 Last items in stock Price €7.19
PCB Circuit Board Marker Pen 1.0mm for printed circuits PCB Circuit Board Marker Pen 1.0mm for printed circuits features: -Permanent resistance ink to acid attack-Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Does not leave stains of ink, resistant to sunlight-Quantity: 1.00mm - 1 unit Code V0003 Available Price €2.79
Sodium Persulfate - etching agent for PCB and copper - pack 100g Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. Code Q0053 Available Price €2.85
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.79
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features: Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks. Code H0021 Available Price €0.99