GY-MAX4466 MAX4466 Electret Microphone Adjustable Amplifier Module The module is equipped with an electret microphone with a sensitivity in the range of 20-20 kHz and the amplification is used in the Maxim MAX4466 integrated circuit, an operational amplifier specially designed for use as a microphone preamplifier. Code M0214 Available Regular price €4.92 -€1.00 Price €3.92
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.31
Adjustable DC Module LM2596 1,25-32V 3A Step Down 3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features: - Based on the LM2596S-ADJ regulator - Rectification: Asynchronous - Output Voltage: 1.25v - 32v DC (adjustable) - Voltage of Input: 3.2v - 35v DC - Max Output Current: 3A (with heat sink) - Ripple at output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2.5% - Operating Temperature: -40ºC to + 85ºC - Measurements 43x 21x 14 mm Code A0004 Available Price €1.64
10x Electrolytic Capacitor 100 uF 25V 105ºC for Arduino 10x Electrolytic Capacitor 100 uF 25V 105ºC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 100uF-Maximum tension: 25V-Maximum temperature: 105º C-Dimensions: 6x11mm-Quantity: 10 units Code D0044 Available Price €0.11
Flux Solid Resin Rosin 20g Flux rosin, solid resin, neutral pH for correct electronic soldering - They do not cause corrosion of non-ferrous metals - Does not cause short circuits Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs. Use a toothpick for the application. Do not apply excessively. Safety: - Use in ventilated spaces. Do not inhale the fumes that are given off by welding. - Keep the bottle tightly closed and out of the reach of children. - Do not ingest. Non-toxic - Rarely irritating to skin contact Code Q0010 Available Price €1.40
Resistor 4.7R Ohm 5% 0,125W 1/8W Resistor 4.7R Ohm 5% 0,125W 1/8W features:-4.7R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.125W-Dimensions: 1.85x3.5mm Code D0001 Available Price €0.07
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.30
KP08 Pillow Block Mounted Bearing 8mm 8mm Bore Pillow Block Mounted Bearing is often suited to support rotating shaft applications. Code I0144 ✗ Out-of-Stock Regular price €2.88 -€1.20 Price €1.68
PCB Circuit Broad Marker Pen for printed circuits - 3pcs pack 3x PCB Circuit Broad Marker Pen for printed circuits features: -Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Resistant to sunlight-Permanent resistance ink to acid attack-Quantity: 3 unitsS 0.4mm - 1 unitM 0.6mm- 1 unitL 1.0mm - 1 unit Code V0006 Available Price €6.27
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.31
PCB Circuit Board Marker Pen 0.4mm for printed circuits PCB Circuit Board Marker Pen 0.4mm for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.4mm- 1 unit Code V0004 Available Price €2.31
PCB Circuit Broad Marker Pen for printed circuits - 3pcs pack 3x PCB Circuit Broad Marker Pen for printed circuits features: -Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Resistant to sunlight-Permanent resistance ink to acid attack-Quantity: 3 unitsS 0.4mm - 1 unitM 0.6mm- 1 unitL 1.0mm - 1 unit Code V0006 Available Price €6.27
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.31
PCB Circuit Board Marker Pen 0.4mm for printed circuits PCB Circuit Board Marker Pen 0.4mm for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.4mm- 1 unit Code V0004 Available Price €2.31