Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm

Wireless Remote Control + 4 Channel Receiver features:

Remote Control:
- Operating voltage: DC12V (battery included)
- Operating current: 10mA @>

Mini ESP8266 ESP12E CH340 WiFi Development
NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu it is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development features:

- Compatible with Arduino, programming with the Arduino IDE
- Power supply voltage: 5V
- LOGICAL LEVELS: 3.3V
- 11 input / output pins
- 1 ADC (input: 0-3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz - Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and power management units Integrated

Tin ideal for application in consumer electronics circuits
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead
- Melting temperature 187/190 C
- Alloy Sn60Pb40
- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required.  - Quantity: 1 unit
- High quality - manufactured in EU

TP4056 5V Micro USB Lithium Battery Charger Module features:
- Based on TP4056ES regulator
- Lipo micro USB Li-Ion charger
- Input Voltage: 4.5V - 5.5 VDC
- Full charge voltage: 4.2V +/- 1.5%
- Max Output Current: 1A
- Indicator LED: charging red, charging green
- Operating temperature: -10ºC to + 85ºC
- IN + and IN- connection for electronic circuits
- Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A
- Measurements: 25x19x5 mm
- Ideal for 18650 batteries

LED Display Screen Board Matrix 8x8 Common Anode/ Common Cathode Columns Red Dots features:
- Supply voltage of the LED points: 1.8-2.4 VDC
- LED color of the dots: red
- Pin numbers: 16
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 120mA
- Power consumed per segment: 80mW
- Segment numbers (points): 64
- Diameter of a point: 3mm
- Operating temperature: -35°C - + 85°C
- Storage temperature: -35°C - + 85°C
- Screen with common anode connection for the rows and common cathode for the columns
- Screen size: 32x32x8 mm

Laminated Copper Clad Prototype PCB Circuit Board 10x15cm, 35um single side.

It is not possible to reverse the polarity by mistake.
JST PHR-3 Male 3 PIN 2mm connector features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 3 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin