Fotoboard Pre-Sensitized Photoresist Coated PCB Copper Laminate - One-Sided 15x20cm

A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features:
- USB-Serial TTL 3.3V -5V Converter
- LED indicator for Tx, Rx, power supply
- Communication: Transceiver RX / TX TTL COM Virtual RS232
- Voltage: 3.3V or 5V - via jumper
- Pins: DTR, RX, TX, VCC, CTS, GND
- Protections: Electronic fuse up to 500mA
- Size: 35 x 17 mm Pitch 2,54mm
- Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for remote control + 4-channel receiver 315 MHz IC2262
- Wire the USB />

Micro Servo Compatible with MG90S features:
- Operating voltage: 4.8Vdc (5V) or 6Vdc
- Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V
- Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V
- Gear type: metallic
- Turning width: 180º
- Temperature working: from -30 to 60 ºC
- 3 plastic propellers / arms
- Fixing screws
- Size: 22.6 x 11.8 x 31 mm
- Weight: 13.4 gr

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

The first Raspberry microcontroller with the proprietary RP2040 chip and a dual-core Arm Cortex-M0+, the Foundation's cost-effective yet highly flexible solution. Designed for high performance and with a high degree of digital interfaces. Programming in C/ C++ and MicroPython.

Laminated Copper Clad Prototype PCB Circuit Board 10x15cm, 0.35um double side.

Microcontroller ATMEGA328P-PU DIP-28 features:
- Series: AVR® ATmega
- Core Processor: AVR
- Package / Case: 28-DIP (0.300 ", 7.62mm)
- Core Size: 8-Bit
- Speed: 20MHz
- Connectivity: I²C, SPI, UART / USART
- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT
- Number of I/O: 23
- Program Memory Size: 32KB (16K x 16)
- Program Memory Type: FLASH
- EEPROM Size: 1K x 8
- RAM Size: 2K x 8
- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V
- Data Converters: A / D 6x10b
- Oscillator Type: Internal
- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST
- RoHS: Yes
- Quantity: 1 unit

This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm.
It is powered by 12VDC and has a consumption of 420mA.
This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm
- Holding force: 0.8N
- Operating temperature: -5 ° C to 40 ° C without condensation
- Humidity of operating environment: 45% to 85% non-condensing
- Push bar diameter: 0.8 cm / 0.3 "
- Material type: Metal
- Model: ZYE1-0837Z
- Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 "

Sensor used to measure the current in the circuit to which it is connected. Characteristic: - Output: Analog
- Power: 5V
- Accuracy: 1.5%
- Measuring capacity: +/- 30A
- Dimensions: 31 x 13 mm