Prototype Board Transparent 400 points

Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use features:

The 28BYJ-48 has everything you need to start using stepper motors in your project. A stepper motor converts digital impulses into small movement steps. in one direction Characteristic: - Motor model: 28BYJ-48
- Motor phases: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per lap: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm
- Operating temperature: -45ºC to + 125ºC
- Motor cable length: 19cm
- Motor block diameter: 28mm
- Motor dimensions: 42mm x 32mm x 30mm

Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white.

Inductive Proximity Sensor PL-05P PNP Limit Switch is used for controlling machinery as part of a control system, as a safety interlock, or to count objects passing a point. Inductive proximity sensor PL-05P 5mm with PNP output features:
- Manufacturer: Fotek,
- Square Type,
- Sensing distance: 5mm,
- Operating voltage: 10 - 30 VDC,
- Response frequency: 800Hz,
- Output method: PNP, 150mA load,
- Hysteresis: <10% of sensing distance,
- Protection degree: IP67,
- Working temperature/Hum: -20ºC - +80ºC, 35% - 90% RH,
- Body dimension: 30.5x17.9x10.2mm (LxWxH),
- Mounting Method: Flush,
- Sensing Direction: Horizontal,
- Materia Housing: High-impact plastic,
- Screw hole: 3.2mm, Pitch: 10.5mm,

The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit.

12 Bars of 7mm Hot Silicone Glue Gun features:
- Hot melt adhesive
- Blister packaging
- Includes 12 silicone bars 7.2mm x 100mm

This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.
It works with very low current consumption.
The segments of this screen are connected with a common anode point.
LED Display 1-Digit 7-Segment Red Common Anode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Digit numbers: 1
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm