Acrylic platform for Arduino UNO
  • Acrylic platform for Arduino UNO
  • Acrylic platform for Arduino UNO
  • Acrylic platform for Arduino UNO
  • Acrylic platform for Arduino UNO
  • Acrylic platform for Arduino UNO

Acrylic platform for Arduino UNO

PB030

Acrylic panel for Arduino Uno with a very simple structure with rubber feet. After assembly with the 400 points breadboard, the assembly looks professional and elegant.

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Stand for Arduino Uno with a very simple structure and rubber feet. After mounting it with the 400 points breadboard, the assembly looks professional and elegant, ideal when we want to take our Arduino project out for a demonstration!

The pins on the bottom of the Arduino board will not accidentally short-circuit, which will protect the module from damage or burns.

In addition, the glued breadboard will not move during assembly and the assembly will be stable. This application is extremely convenient and practical to use.

It makes work easier and looks very professional.

Product features

  • Suitable for Arduino Uno and 400-pole breadboards
  • Dimensions 12 x 8.3 cm
  • Material: plexiglass

Including

Stand for Arduino UNO

4 rubber feet, screws

Note

Arduino UNO board NOT included. Preview photos only.

Customers who bought this product also bought

Tower Pro Micro Servo 9g SG90 360 degree

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

R0075

Price €2.95

Charger 2x18650 with EU Plug Cable

Charger 2x18650 with EU Plug Cable features:
- This product is very convenient and easy to use
- Black
- Material: metal and plastic
- Weight: 74g
- Input voltage: AC 100 -240 V 50/60 Hz
- Compatible with: 18650 Li-ion
- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status
- Output: DC 4.2 V, 1A
- Plug: EU plug
- Cable length: 38cm
- The battery are not included

A0081

Price €4.59

10x Photoresistor GL5528 LDR

Photoresistor is a resistor whose resistance decreases with increasing intensity of light
that affects her 10x Photoresistor GL5528 LDR features:
- Model: GL5528
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 10-20KΩ
- Resistance with darkness (0lux): 1MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC
- 10k - 20k Arduino PiC 5mm
- Quantity: 10 units

S0050

Price €0.15

Arduino Uno R3

Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog

BAR66

Price €23.99

Female DC Power Connector Jack 2.1x5.5mm

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

K0050

Price €0.49

L298N Motor Drive Controller Board Module Dual H Bridge DC

It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
L298N Motor Drive Controller Board Module Dual H Bridge DC features:
- Minimum operating voltage: 5 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A
- Logic voltage: 5V
- PWM signal inputs for speed control
- Outputs: for 2 DC motors or for a bipolar stepper motor
- Measures: 43x43x24 mm
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles

M0100

Price €2.79

PCA9685 digital servo motor controller 16 channel PWM

This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos.
It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity.
PCA9685 digital servo motor controller 16 channel PWM features:

- Supply voltage: 3-5 VDC,
- Maximum motor voltage: 6 VDC,
- Number of channels: 16,
- Resolution per channel: 12 bits,
- Interface: I2C,
- Working frequencies: 40-1000 Hz,
- PCB size: 62.3x25.3mm .

R0074

Price €8.95
€2.49

2,06 tax excl.

Tax included
Price €2.49

Order until 4pm we will send today
30 days return