Ceramic Capacitor 100nF 50v 104 Ceramic Capacitor 100nF (0,1uF) 50v 104 PCB PIC Arduino features: Orders only in multiples of 20 units-Type: Ceramic Y5V-Tolerance: +80/-20%-Dimensions: diameter 9.5mm, pitch 5.08mm Code D0057 Available Price €0.05
5x Electrolytic Capacitor 2200uF 25V 105ºC PIC for Arduino 5x Electrolytic Capacitor 2200uF 25V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 2200uF-Maximum tension: 25V-Maximum temperature 105º C-Dimensions: 13x21mm-Quantity: 5 units Code D0049 Available Price €0.23
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.48
ATmega2560 R3 REV3 16U2 Mega2560 module with USB cable It has an Atmega2560 chip running at 16Mhz with a factory loaded bootloader with 54 digital input / output pins (from which 14 can be used as PWM outputs) and 16 analog inputs, 4 UART (hardware serial ports). The board includes a USB connector, an ICSP port, a reset button and some status LEDs. Atmega16U2 programmed as a USB-to-serial converter. Simply connect it to a computer with a USB cable or power with a power adapter and DC connector. Code B0003 Available Price €20.58
MQ-9 Carbon Monoxide Sensor Module MQ-9 Carbon Monoxide Sensor Module features:- Main chip: MQ-9 methane sensor and comparator LM393- Working voltage: 5V- Current: 150mA- Digital output: TTL 0/1- Analog output: analog voltage sensing value- Quick response features:- Detection concentration: 20ppm- 2000ppm carbon monoxide 500ppm- 10000ppm methane CH4 500ppm- 10000ppm LPG- Adjustable sensitivity with the potentiometer- Size: 32mm x 20mmx 18mm Code S0033 Available Price €2.39
Speed controller for DC motor (PWM) 6V-30VDC 300W 10A 20A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 12-40VDC, - Max continuous output current: 10A (peak current 20A), - Max power: 300W, - Dimensions: 60x28x50mm, - PWM frequency: 21kHz, - Static current: 0.02 A (Standby), - Adjustable duty cycle: 5% -100%, - Adjustable speed range: 0% -100%, - It incorporates a 20A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0090 Available Price €8.22
Integrated Circuit Supports DIP8 Width 10.16 mm Integrated Circuit Supports DIP8 Width 10.16 mm features: - Type: DIP DIL- Total number of pins: 8- Step between pins: 2.54 mm- Material: Polybutylene terephthalate- Length: 7.62 mm- Width: 10.16 mm- Temperature min .: -25 °C- Max temperature: +85 °C- RoHS compliant Code Z0005 Available Price €0.08
Potentiometer B10K linear Characteristic: -10k OHM kΩ - linear potentiometer 10k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0067 Available Price €0.82
Raspberry Pi Pico Relay Board The Raspberry Pi Pico Relay Board allows you to control up to 4 devices and loads up to 240V AC at 7A, 30V DC at 10A. It provides a way for users to control high voltage/current devices. Code RA126 Available Price €20.62
SONOFF D1 Smart Dimmer Switch - WiFi & RF SONOFF D1 Smart Dimmer Switch is a smart dimmer switch that offers smart light control solutions perfect for your home or workplace, controlled either by the eWeLink application, via 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn the light on at the most appropriate level, or schedule it at the times you want Code WS027 Available Regular price €9.79 -€2.86 Price €6.93
Sonoff BasicR3 Wi-FI remote control switch SONOFF Basic R3 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace. By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily. Code WS006 ✗ Out-of-Stock Price €7.43
Sonoff 4CH PRO R3 Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product Code WS024 Available Price €21.48
Sonoff POW R3 - 25A 5500W POW provides another great power consumption metering functionality. The POWR3 remote switch has the highest output power to make your high power devices smart, or as a single room meter to measure energy consumption. Like all Sonoff products, it works with eWeLink, making it compatible with any smart home ecosystem. Code WS042 Available Regular price €34.63 -€7.00 Price €27.63
Module Relay 12V Light sensor LDR This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold. The optical isolation relay effectively protects the chip and ensures better performance. This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1 - Supply voltage: 12VDC - Output load capacity: 250V 10A AC / 30V 10A DC - Relay activation current: & gt; 100mA - Insulation: Yes - Indicator LED: Green and Red - PCB size: 5x2.6 cm / 1.96x1.02 " Code RL019 Available Price €2.88
Sonoff 4CH PRO R2 - 4 Channel Intelligent WI-FI + Radio Remote Control Switch 433.92 MHz radio receiver module that allows you to also control it via a radio remote control. You can control each channel either by remote control, the free APP "eWeLink" or with wizards such as Alexa or Google Home. This will allow you to create scenes, schedules, and much more. Its relay supports up to 4 devices simultaneously. Each device can be powered by 5-24 V DC. Code WS023 ✗ Out-of-Stock Price €26.36
Sonoff Slampher - WiFi and RF 433MHz Intelligent Light Support Adapter This E27 bulb adapter will allow you to control its on and off by WiFi and to control your lamps by the free eWeLink APP, with which you can create routines and scenes, by IFTTT, or also by voice assistants such as Alexa or Google Home. Code WS015 Available Price €12.39
Relay SRD-05 DC-2P 5V 10A SPDT Relay SRD-05 DC-2P 5V 10A SPDT features:- Supply voltage: 5V- Output Current: 10A- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica Code RL011 Available Price €0.81
Sonoff MiniR4 - Switch WiFi The Sonoff MINI R4 Extreme Smart Switch (the smallest WiFi switch) is a universal WiFi controlled switch built with the ESP32 chip. It works with a voltage of 230V and allows you to control any device from anywhere in the world, controlling it via your mobile phone or voice assistants such as Alexa or Google Home. Thanks to its small size - it's 40 per cent smaller than the Sonoff miniR2 - it fits most power supplies, including the smallest European standards. Code WS082 Available Regular price €12.36 -€1.00 Price €11.36
Raspberry Pi Pico Relay Board The Raspberry Pi Pico Relay Board allows you to control up to 4 devices and loads up to 240V AC at 7A, 30V DC at 10A. It provides a way for users to control high voltage/current devices. Code RA126 Available Price €20.62
SONOFF D1 Smart Dimmer Switch - WiFi & RF SONOFF D1 Smart Dimmer Switch is a smart dimmer switch that offers smart light control solutions perfect for your home or workplace, controlled either by the eWeLink application, via 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn the light on at the most appropriate level, or schedule it at the times you want Code WS027 Available Regular price €9.79 -€2.86 Price €6.93
Sonoff BasicR3 Wi-FI remote control switch SONOFF Basic R3 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace. By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily. Code WS006 ✗ Out-of-Stock Price €7.43
Sonoff 4CH PRO R3 Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product Code WS024 Available Price €21.48
Sonoff POW R3 - 25A 5500W POW provides another great power consumption metering functionality. The POWR3 remote switch has the highest output power to make your high power devices smart, or as a single room meter to measure energy consumption. Like all Sonoff products, it works with eWeLink, making it compatible with any smart home ecosystem. Code WS042 Available Regular price €34.63 -€7.00 Price €27.63
Module Relay 12V Light sensor LDR This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold. The optical isolation relay effectively protects the chip and ensures better performance. This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1 - Supply voltage: 12VDC - Output load capacity: 250V 10A AC / 30V 10A DC - Relay activation current: & gt; 100mA - Insulation: Yes - Indicator LED: Green and Red - PCB size: 5x2.6 cm / 1.96x1.02 " Code RL019 Available Price €2.88
Sonoff 4CH PRO R2 - 4 Channel Intelligent WI-FI + Radio Remote Control Switch 433.92 MHz radio receiver module that allows you to also control it via a radio remote control. You can control each channel either by remote control, the free APP "eWeLink" or with wizards such as Alexa or Google Home. This will allow you to create scenes, schedules, and much more. Its relay supports up to 4 devices simultaneously. Each device can be powered by 5-24 V DC. Code WS023 ✗ Out-of-Stock Price €26.36
Sonoff Slampher - WiFi and RF 433MHz Intelligent Light Support Adapter This E27 bulb adapter will allow you to control its on and off by WiFi and to control your lamps by the free eWeLink APP, with which you can create routines and scenes, by IFTTT, or also by voice assistants such as Alexa or Google Home. Code WS015 Available Price €12.39
Relay SRD-05 DC-2P 5V 10A SPDT Relay SRD-05 DC-2P 5V 10A SPDT features:- Supply voltage: 5V- Output Current: 10A- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica Code RL011 Available Price €0.81
Sonoff MiniR4 - Switch WiFi The Sonoff MINI R4 Extreme Smart Switch (the smallest WiFi switch) is a universal WiFi controlled switch built with the ESP32 chip. It works with a voltage of 230V and allows you to control any device from anywhere in the world, controlling it via your mobile phone or voice assistants such as Alexa or Google Home. Thanks to its small size - it's 40 per cent smaller than the Sonoff miniR2 - it fits most power supplies, including the smallest European standards. Code WS082 Available Regular price €12.36 -€1.00 Price €11.36