SONOFF DS18B20 - Temperature sensor with transmitter 1m
  • SONOFF DS18B20 - Temperature sensor with transmitter 1m
  • SONOFF DS18B20 - Temperature sensor with transmitter 1m
  • SONOFF DS18B20 - Temperature sensor with transmitter 1m

SONOFF DS18B20 - Temperature sensor with transmitter 1m

WS018

This 1-meter probe uses the original DS18B20 temperature sensor chip. The DS18B20 is a waterproof temperature sensor/thermometer. It is waterproof, moisture proof and rustproof with the high quality stainless steel tube encapsulated. This is a spare part or accessory used in SONOFF TH10 / TH16.

Sonoff
Add to wish list

This 1-meter probe uses the original DS18B20 IM160712003 temperature sensor chip. The DS18B20 is a waterproof temperature sensor/thermometer. It is waterproof, moisture proof and rustproof with the high quality stainless steel tube encapsulated. This is a spare part or accessory used in SONOFF TH10 / TH16.

Description:

The probe adopts the DS18B20 temperature sensor chip. Its probe is made of stainless steel which is waterproof, moisture proof and rustproof. Stainless steel housing 6 * 50 mm and lead length 100 cm. Please note that the temperature sensor requires no external components and has a unique bus interface. High-quality waterproof stainless steel tube enclosure to prevent rusting.

Specifications:

  • Power supply range: 3.0V to 5.5V
  • Adjustable resolution: 9-12
  • Operating temperature range: -55°C to + 125°C
  • Output cable: red (VCC), black (GND), yellow (DATA)
  • Cable length: 100 cm
  • Stainless steel tube size: 6 × 45 mm
  • Weight 30 g
  • Model IM130327002

Included:

1 x 1m probe DS18B20

Customers who bought this product also bought

Sonoff TH16 - obsolete

Sonoff TH16 is a WiFi-controlled universal switchIt works with the voltage of 230V up to 3500W and makes it possible to control any device anywhere in the world. The module can integrate humidity sensors Si7021 or AM2301 (can be purchased separately) or temperature sensor DS18B20

WS002

Sensor Module Moisture Earth Water Soil

The module has two outputs: analog A0 and digital D0
Digital output D0 - signal 0 appears or 1 depending on the threshold setting
The threshold is set with the potentiometer
The sensor can be used for example:
Automatic watering for potted plants
With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants
Characteristic:
Operation: 3.3V -5V
- Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - indicator digital switching output
- PCB measurements: 3 x 1.5 cm
- Probe measurements: 6 x 3 cm

S0021

Price €1.61

Black UV sensor module UVM-30 for Arduino

UVM-30A sensor module suitable for any location and requires stable and precise measurement of UV light.
Ideal for Arduino projects.
Black UV sensor module UVM-30 for Arduino features:
- Operating voltage: 3-5 VDC,
- Voltage input: DC 0-1 VDC,
- 3-pin connector:
- GND (-): ground connection,
- Out: sensor output signal,
- VCC (+): sensor supply,
- Measurement accuracy: +/- 1UV index,
- Working current: 0.06mA (standard) / 0.1mA (max.),
- Response wavelength: 200-370 nm,
- Working temperature: -20ºC - + 85ºC,
- PCB size: 28x12mm.

M0178

Price €8.22

Servos Tester

Servos Tester features:
- 3-Channel Tester
- For Electronica Arduino

R0029

Regular price €2.31 -€1.00 Price €1.31

Screw Shield V1 for Arduino UNO y MEGA

Screw Shield V1- Arduino ScrewShield UNO y MEGA features:
Screw Shield V1 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate
- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more.

M0173

Price €3.26

Arduino compatible UNO R3 board

- It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features:
- Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATmega328
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O Pins: 14
- Analog input pins: 6
- DC current per I / O Pin: 40 mA
- DC Current per Pin 3.3V: 50 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328
- SRAM 2 KB - Atmega328

B0009

Regular price €8.22 -15% Price €6.99

Heat Shrinkable Tube 5 Colors 3 Meters Package

Heat Shrinkable Tube 5 Colors 3 Meters Package features:
- Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas.
- These heat shrink tubes are very flexible and of high quality. Made in EU
- Different sizes of 20 cm each are delivered:
* 1,6mm: black, brown, red, yellow, orange
* 2,4mm: black, brown , red, yellow, blue
* 3,2mm: black, brown, red, yellow, blue
- Quantity: 15 units
- Material: polyolefin
- Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter)
- Minimum shrinkage temperature: 115 ° C maximum 200 ° C

K0047

Price €1.61

SONOFF ZBBridge-P - Smart Zigbee Bridge Pro

The SONOFF ZigBee Bridge Pro is the heart of the smart home that allows you to remotely manage a variety of ZigBee devices and sensors to monitor and control the home. Compared to the previous version, the new ZBBridge-P allows the operation of up to 128 devices. In addition, it is equipped with an alarm control unit function. It is compatible with the new ZBMINI-L smart switch and S26R2ZB smart plug products, allowing you to easily automate your home.  Interact with all your Sonoff devices, both WiFi and ZigBee, thanks to this bridge.

WS078

Regular price €20.65 -€5.00 Price €15.65

Related articles on blog

No related article on blog

€8.18
Save €3.00 €5.18

5,18 tax excl.

1
30+ items
Regular price €8.18 Price €5.18

Order until 4pm we will send today
30 days return