DRV8833 Controller DC Motor PAP Driver DRV8833 can control up to two DC motors or one stepper motor with a constant current of 1.5 A (peak 4A ). The motors are controlled, independently by means of PWM signals the direction of rotation of the motors can be controlled, neutral or stop with a frequency of up to 100 kHz. Two input signals (IN1 and IN2) can be used to control one motor (connected to OUT1 and OUT2) and the other two input signals (IN3 and IN4) to control the second motor (connected to OUT3 and OUT4). NOTE: This DRV8833 dual-bridge motor controller is the replacement for the TB6612FNG dual-channel motor controller. The pins come unsoldered. If the motor draws currents above 0.6A, the use of a heat sink may be required. DRV8833 Controller DC Motor PAP features: Code R0082 ✗ Out-of-Stock Price €2.45
Pulley GT2 20 Teeth 5mm Aluminium Pulley 3D Printer Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features: - Number of teeth: 20 - Pitch: 2mm - Material: Aluminum alloy - Outside diameter: 18mm - Inner hole: 5mm - Use with strap: 6mm and 6.35mm - Ideal to fix on the axis of the motors of your 3D printer Code I0031 Available Price €1.79
Laminated Copper Clad Prototype PCB Circuit Board 30x19cm Laminated Copper Clad Prototype PCB Circuit Board 30x19cm. Code PB033 Backorder Price €5.69
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
Pro Mini 16MHZ 5V Arduino compatible board - Bootloader Pin Header Compatible 100% ARDUINO - Pro Mini Atmega328P 5v 16Mhz - Miniaturized compatible version of Arduino Pro Mini - It has an Atmega328P chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can only solder the pins that we need Characteristic: - ATmega328P 16MHz chip with external quartz crystal - Auto-reset - micro switch - Integrated 5V regulator - FLASH 32kB memory - SRAM 1kB memory - EEPROM 1Kb memory - Analog input A0-A7 - 8 PWM channels - External interruption - TWI / I2C, UART, SPI interfaces - Power and status LEDs - Dimensions: 18x33mm - Weight: 30 grams Useful links for Arduino /> Code B0019 Last items in stock Price €8.95
Power supply DC 12V 16.7A 200W Power supply DC 12V 16.7A 200W features: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output amperage: 16.7A - Power at 12V: 200W - Dimensions: 200mm x 99mm x 43mm - IP20 ROHS CE Code A0057 Available Price €16.99
10x Linear Potentiometers 10k OHM kΩ 10x Linear Potentiometers 10k OHM kΩ features:- Horizontal variable resistance PCB- 10k Ohm kΩ Linear- Quantity: 10 units Code K0062 Available Price €0.21
Male 40 Pin Header 1x40 Male 40 Pin Header 1x40 features: Type: Male, Insertion position: Vertical, Separation between pins: 2.54mm Code K0138 Available Price €0.69
Fan 5V 2x Cable 50x50x15mm Fan 5V 2x Cable 50x50x15mm features: - Voltage: 5V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 15mm Code I0169 Available Price €2.09
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Fan 12V 2 wire Reprap 3D printer Characteristic: - Voltage: 12V - Consumption: 120mA - Speed: 4800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Life time: 40000 hours - Operating temperature: -10 ° C to 65 ° C - Length Cable: 28cm - Dimensions: 40mm x 40mm x 20mm - For cooling MK8 hotels Code I0025 Available Regular price €2.54 -€0.55 Price €1.99
Fan 12V 2x Cables 3D Reprap Printer Fan 12V 2x Cables 3D Reprap Printer features: - For Prusa RepRap 3D Printer - Voltage: 12V - Consumption: 90mA - Speed: 7000rpm ± 10% - Noise level: 25dB ± 10% - Screw diameter: 3.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 28cm - Dimensions: 30mm x 30mm x 10mm Code I0045 Available Price €1.59
Fan 12V 2x 3D Printer Cables Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 65mA - Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 11cm - Dimensions: 40mm x 40mm x 10mm Code I0026 Available Price €1.59
Fan 12V 80x80x25mm Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 25mm Code I0195 Available Price €4.45
Peltier Thermoelectric Kit with Cooling Fan 12V 72W Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. Code M0227 Last items in stock Price €31.95
Fan 12V 2x Cable 50x50x15 3D Printer Reprap Fan 12V 2x Cable 50x50x15 3D Printer Reprap features: - Voltage: 12V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 10mm Code I0120 Available Price €2.09
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Mini Fan 12V 2x 3D Printer Cables Mini Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 80mA - Speed: 2600rpm +/- 10% - Temperature operating: -10 ° C to 65 ° C - Cable length: 12cm - Dimensions: 25mmx 25mm x 10mm Code I0027 Available Price €1.59
Fan 5V 2x Cable 50x50x15mm Fan 5V 2x Cable 50x50x15mm features: - Voltage: 5V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 15mm Code I0169 Available Price €2.09
Fan 12V 2x Cable 50x50x15 3D Printer Reprap Fan 12V 2x Cable 50x50x15 3D Printer Reprap features: - Voltage: 12V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 10mm Code I0120 Available Price €2.09
Fan 12V 80x80x25mm Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 25mm Code I0195 Available Price €4.45
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Fan 12V 2x 3D Printer Cables Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 65mA - Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 11cm - Dimensions: 40mm x 40mm x 10mm Code I0026 Available Price €1.59
Peltier Thermoelectric Kit with Cooling Fan 12V 72W Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. Code M0227 Last items in stock Price €31.95
Mini Fan 12V 2x 3D Printer Cables Mini Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 80mA - Speed: 2600rpm +/- 10% - Temperature operating: -10 ° C to 65 ° C - Cable length: 12cm - Dimensions: 25mmx 25mm x 10mm Code I0027 Available Price €1.59
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Fan Black 12V 2x PC CPU Cables Characteristic: - Voltage: 12V - Consumption: 0.3A - Screw diameter: 4mm - Product duration in operation: 30000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 14.5cm - Dimensions: 92mm x 92mm x 25mm Code I0054 Available Price €2.89
Fan 12V 2x Cables 3D Reprap Printer Fan 12V 2x Cables 3D Reprap Printer features: - For Prusa RepRap 3D Printer - Voltage: 12V - Consumption: 90mA - Speed: 7000rpm ± 10% - Noise level: 25dB ± 10% - Screw diameter: 3.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 28cm - Dimensions: 30mm x 30mm x 10mm Code I0045 Available Price €1.59