Fan 12V 2x Cables 3D Reprap Printer
  • Fan 12V 2x Cables 3D Reprap Printer
  • Fan 12V 2x Cables 3D Reprap Printer

Fan 12V 2x Cables 3D Reprap Printer

I0045

Fan 12V 2x Cables 3D Reprap Printer features:
- For Prusa RepRap 3D Printer
- Voltage: 12V
- Consumption: 90mA - Speed: 7000rpm ± 10%
- Noise level: 25dB ± 10%
- Screw diameter: 3.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 28cm
- Dimensions: 30mm x 30mm x 10mm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Fan 12V 2x Cables 3D Reprap Printer features:

- For Prusa RepRap 3D Printer
- Voltage: 12V
- Consumption: 90mA < br /> - Speed: 7000rpm ± 10%
- Noise level: 25dB ± 10%
- Screw diameter: 3.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 28cm
- Dimensions: 30mm x 30mm x 10mm

Data sheet

RPM
7000
Consumo de energía
90

Customers who bought this product also bought

Power supply DC 12V 16.7A 200W

Power supply DC 12V 16.7A 200W features:
- Supply voltage: 110 / 230V AC
- Output voltage: 12V DC - Output amperage: 16.7A
- Power at 12V: 200W
- Dimensions: 200mm x 99mm x 43mm
- IP20 ROHS CE

A0057

Price €14.04

A4988 + RepRap Radiator

A4988 + RepRap Radiator features:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A (adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16
- Factory soldered temples
- Use potentiometer to adjust current
- Measurements: 20x16x12 mm

I0023

Price €1.57

Adapter 2.5mm female power jack with PCB

The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ...
This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects.
It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
Adapter 2.5mm female power jack with PCB features:
- Connector type: 2.5mm female jack ,
- Color: black,
- Nominal voltage: 12v DC,
- Maximum current: 0.5A DC,
- Insulation resistance: ‰ ¥ 100MΩ,
- Operating temperature: -25ºC to + 85ºC,
- Number of output pins: 3
- Pitch between output pins: 2.54mm.

M0194

Price €0.74

Integrated Circuit Supports DIP18 Width 10.16mm

Integrated Circuit Supports DIP18 Width 10.16mm features:
- Type: DIP DIL
- Total number of pins: 18
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 20.32 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Z0007

Price €0.16

Dupont Connector 2.54mm Female

Dupont Connector 2.54mm Female features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

K0110

Price €1.81

Cable 1x0.35 Flexible single-pole 0.35mm black 1m

Cable 1x0.35 Flexible single-pole 0.35mm² black features:
-Conductor: Flexible Copper
-Insulation: PVC
-Low voltage electrical cables
-Standard: EN 50525-2-31
-Number of conductors: 1x0.35mm²
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer Diameter: 2.4mm

K0031

Price €0.37

HC-SR501 Motion Detector Module Passive Infrared PIR Sensor

Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º.
An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features:
- Infrared sensor with control circuit
- Adjustable sensitivity and time
- Operating voltage: 4.5V- 20V
- Consumption in Idle state:

S0003

Price €1.48
€1.31

1,31 tax excl.

1
23 items
Price €1.31

Order until 4pm we will send today
30 days return