PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €4.21
Resistor 100R Ohm 5% 0,25W 1/4W Resistors 100R Ohm 5% 0,25W 1/4W features:- 100R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0005 Available Price €0.07
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €3.71
DS18B20 Submersible Probe Sensor Temperature Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.DS18B20 Submersible Probe Sensor Temperature features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Red Vcc - Yellow digital output- Inocidable steel- Cable length: 1m Code S0019 ✗ Out-of-Stock Price €1.98
Small Probe Test for Multimeter Red Color Small Probe Test for Multimeter Red Color features: - 100% new and high quality- Material: brass and plastic- Powerful spring pulling the min hooks to grasp the small components firmly and avoid any short circuit- Hands free to repair, you can connect the clips to multi-meter or DC POWER by a track- It will help you to test IC or repair the cell phone and other mini electronic products more conveniently- Length: 4.3 cm / 1.69 "- Size of the brass hook: approximately 0.9mm x 0.4mm- Red color Code H0123 Available Price €0.66
MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.40
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 16g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 16 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0114 ✗ Out-of-Stock Price €1.48
Desoldering Wire 2mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 2mm features:- Material: Copper- Length: 1.5m- Width: 2mm Code H0006 Available Price €1.48
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.49
Thermally Conductive Silicone Paste HP 7g Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Code Q0146 Available Price €2.06
Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Last items in stock Price €2.44
Silicone Insulating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. The breaking voltage is ~ 30kV / mm.Preserves rubber, plastic. A wide range of operating temperatures: -50 ° C to 200 ° C. Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Available Price €2.02
Thermal Paste Syringe 3.1W / mK - AG Copper Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.44
Silicone Insulating Paste N 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Regular price €1.48 -€0.30 Price €1.18
Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €9.08
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.49
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €3.96
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €6.07 -€2.02 Price €4.05
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.49
Thermally Conductive Silicone Paste HP 7g Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Code Q0146 Available Price €2.06
Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Last items in stock Price €2.44
Silicone Insulating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. The breaking voltage is ~ 30kV / mm.Preserves rubber, plastic. A wide range of operating temperatures: -50 ° C to 200 ° C. Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Available Price €2.02
Thermal Paste Syringe 3.1W / mK - AG Copper Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.44
Silicone Insulating Paste N 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Regular price €1.48 -€0.30 Price €1.18
Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €9.08
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.49
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €3.96
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €6.07 -€2.02 Price €4.05