2x Insulation Tapes PVC Blue 10m x 15mm x 0.13mm

Resistor 100K Ohm 5% 0,25W 1/4W features:
 100K Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).
- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales.

Ideal for projects with ARDUINO, PIC, AVR, Raspberry
The infrared receiver receives the signal of 38kHz for remote control

W1209 12V DC Thermostat Digital Temperature Controller Switch features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50 -110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measurement accuracy: 0.1 ° C
- Refresh rate: 0.5 s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Power of output: 10A relay
- Sensor probe: NTC waterproof sensor (10K 0.5%)
- Environmental requirements: -10 ~ 60 ° C Humidity 20% -85%
- Dimensions: 48 x 40 mm

Mini Fan 12V 2x 3D Printer Cables features:
- Voltage: 12V
- Consumption: 80mA
- Speed: 2600rpm +/- 10%
- Temperature operating: -10 ° C to 65 ° C
- Cable length: 12cm
- Dimensions: 25mmx 25mm x 10mm

Module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
The display module 4-digit LED with TM1637.
The unit can be controlled with just two DIO and CLK control lines.
TM1637 4-Digit Digital Display Module features:

- 3V-5V supply voltage
- Current consumption 250 mA
- 7-segment display 4 digits common anode
- Digit size: 0.36 inches
- Dimensions: 42x24x11mm

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Flux Colophony Rosin Core 40g features:
Flux rosin, solid resin, neutral ph for a correct electronic welding.
- They do not cause corrosion of non-ferrous metals
- Does not cause short circuits
It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.
Use a toothpick for the application. Do not apply in excess.
Security:
- Use in ventilated spaces. Do not inhale vapors that are released when welding
- Keep the pot tightly closed and out of the reach of children
- Do not eat. It is not toxic
- Rarely irritating to skin contact