Wire stripping pliers
  • Wire stripping pliers
  • Wire stripping pliers

Wire stripping pliers

H0579

The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AWG.

OEM
5901890053358
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AW

Wire stripping pliers features:

  • Cable diameter (mm) - 0.8; 1.0; 1.3; 1.6; 2.0; 2.6
  • 13 mm long side pliers
  • Rubberised grip
  • Hardened jaws and blades for precision wire stripping

Customers who bought this product also bought

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Regular price €6.19 -15% Price €5.26

LED diode 1W White SMD 130LM

Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.
Characteristic:
- Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA - Luminous flux: 120-130LM
- Beam angle: 130 degrees

P0043

Price €0.81

L298N Motor Drive Controller Board Module Dual H Bridge DC with interruptor

It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
It incorporates a switch for the connection and disconnection of the entire module.
L298N Motor Drive Controller Board Module Dual H Bridge DC with interruptor features:
- Minimum operating voltage: 5 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A
- Logic voltage: 5V
- PWM signal inputs for speed control
- Outputs: for 2 DC motors or for a bipolar stepper motor
- Measures: 43x43x24 mm
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth />

M0183

Price €3.13

SN74LS32N DIP14 4 Logic Gates Double Entries Integrated Circuit

SN74LS32N DIP14 4 Logic Gates Double Entries Integrated Circuit features:
- Blister: DIP14
- Number of pins: 14
- Step between pins: 2.54 mm
- Manufacturer: from China - Input voltage VCC: 4.75 - 5.25 VDC
- High level input voltage V (IH): 2 VDC
- Low level input voltage V (IL): 0.8 VDC
- Voltage of the input clamp diode V (IK): -1.5 - -0.65 VDC
- High level output voltage V (OH): 2.7 - 3.5 VDC
- Low voltage output voltage V (OL): 0.35 - 0.5 VDC - High level input current I (IH): 20 μA - 0.1 mA
- Low level input current I (IL): -0.4 mA
- High level output current I (OH): -0.4 mA
- Low level I (OL) output current: 8.0 mA
- Short circuit current I (OS): -100 - -20 mA
- High level power supply current I (DC): 6.2 mA

T0058

Price €0.91

Double Side Prototype Copper PCB Board 2x8cm

Double Side Prototype Copper PCB Board 2x8cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

PB024

Price €0.37

Current and Voltage Meter Tester

Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets.
The voltage and current are shown successively.
Current and Voltage Meter Tester features:
- Operating range:
       - Voltage 3 - 7,5V
       - Current 0 -3A
- Resolution: 10mV 1mA
- Error: <± 1.5%%
- Dimensions: 5.2 x 2 x 1.5 cm

K0081

Price €2.39

Related articles on blog

No related article on blog

€3.30

3,30 tax excl.

1
Last 5 items
Price €3.30

Order until 4pm we will send today
30 days return