Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V This module equipped with a PCF8591 converter has a low current power supply and includes 8 bit CMOS data acquisition devices.Your converter has four analog inputs, one analog output and one I2C serial bus interface.It is supplied in the voltage range 2.5V-6V, analog voltage between the negative potential VSS and positive VDD. The control and data signals are transmitted on the two-wire I2C bi-directional bus to the transformed series.The intensity of the ambient light can be converted into a digital signal thanks to its integrated photoresistor.It allows access to eight PCF8591 converters on the same I2C bus without additional equipment. Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V features: - Supply voltage (between VSS and VDD): 2.5-6VDC Code M0133 Available Price €2.39
Dupont Connector 2.54mm Female Dupont Connector 2.54mm Female features: - Connector for soldering or crimping - Lot 100 units - Ideal for your projects electronic, arduino, but can also be used with other microcontrollers Code K0110 Available Price €1.81
1N4007 Rectifier Diodes 1A 1000V DO-41 1N4007 Rectifier Diodes 1A 1000V DO-41 features:- Standard rectifier diode- Configuration: Simple- Reverse voltage: 1000V- Direct voltage drop: 1V- Direct direct current: 1A- Maximum overvoltage current: 30A- Encapsulated: DO-41- Operational tension: -65ºC to + 125ºC Code T0002 Available Price €0.04
L7805 Voltage Regulator 5V 1.5A TO-220 L7805CV Voltage Regulator 5V 1.5A TO-220 features:-Type Output: Fixed-Voltage Output: 5V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0022 Available Price €0.32
2km radius SI4463 433MHz RF Telemetry Arduino compatible A compact, low-power Bottom Effect System Transceiver. Transceiver based on the SI4463 Silicon Labs chip. Industry standard model. In full power operating conditions, open the communication distance up to 2000 km. Much more than the SI4432. Si4463 is a high performance 433 MHz transceiver. and low current consumption of the EZRadioPRO series, which includes a complete transmitter and receiver. Higher sensitivity -126dBm. The maximum output power of + 20dBm, support (G) FSK, 4 (G) FSK, (G) MSK, OOK and ASK modulation. The data rate in the range of 100bps ~ 1Mbps. Operating voltage of 1.8V ~ 3.6V. FCC approval / IC. 2km radius SI4463 433MHz RF Arduino Telemetry features: - Supply voltage: 1.8 ~ 3.6VDC Code W0077 Available Price €5.98
Solar panel DIY 6V 1.1W 200mA Solar panel DIY 6V 1.1W 200mA features: - DIY Mobile Photovoltaic Charger - Working Voltage: 6V - Output Power: 1.1W - Working current: max. 200 mA - Product size: 112x 84x3 mm Code A0064 Available Price €4.88
PLA Filamento 1.75mm 0.85kg Gray color gris Premium Bobina para Impresora 3D Code I0406 Backorder Price €14.45
Technical Petrolatum with Dispenser 65ml Technical Petroleum Jelly with Dispenser 65ml features: - Used for protecting electric contacts, lubricating bearings- Max. operating temperature: 30°C Code Q0063 Available Price €2.80
Anti-Static Tweezers ESD 115mm Anti-Static Tweezers ESD 115mm features: - Anti-static tweezers, short straight tip, matt black- Length: 115mm- Width: 9mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0093 Last items in stock Price €1.40
Scalpels, modelling knives - set of 13 blades and 3 handles. A set of modelling scalpels for delicate (plastic fixings), precision work. The set includes 3 handles and 13 very sharp blades in various shapes. Quick and effortless exchange of blades and handles. Code H0555 Available Price €5.78
Pliers Front Cut 110mm Pliers Front Cut 110mm features: - This model is not isolated, please use it without current- The tool has an opening spring for greater comfort- Use to cut soft materials, electronic components, cables, wires, plastic card- Can also be used for welding work Code H0117 ✗ Out-of-Stock Price €3.76
Wire stripping pliers The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AWG. Code H0579 Available Price €3.30
Anti-Static Tweezers ESD 117mm Anti-Static Tweezers ESD 117mm features: - Anti-static tweezers, curved tip, matt black- Length: 117mm- Width: 10mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0094 Available Price €1.48
Spring-loaded pliers for stripping insulation The practical cable stripper from the Rebel Tools range is ideal for stripping the insulation from single or multi-conductor cables. The hardened jaws and blades allow for greater cutting precision and the serrated tip makes it easier to remove the insulation and minimises the risk of damaging the cable. Code H0581 Available Price €3.30
Side Cutting Pliers 110mm Side Cutting Pliers 110mm features: - This model is not isolated, please use it without current- The tool has an opening spring for greater comfort.- Use to cut soft materials, electronic components, cables, plastic card- Can also be used for welding work Code H0115 ✗ Out-of-Stock Price €4.04
ESD Anti-Static Anti-Magnetic Steel Clamps 110mm ESD Anti-Static Anti-Magnetic Steel Clamps 110mm features: - Length: 110mm- Width: 9mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0020 ✗ Out-of-Stock Price €1.23
ESD Anti-Static Anti-Magnetic Steel Tweezers 125mm ESD Anti-Static Anti-Magnetic Steel Tweezers 125mm features: - Length: 125mm- Width: 11mm- ESD pliers- High precisión, without producing dust, resistant to high temperatures Code H0019 ✗ Out-of-Stock Price €1.23
Anti-Static Tweezers ESD 135mm Anti-Static Tweezers ESD 135mm features: - Anti-static tweezers, straight tip, matt black- Length: 135mm- Width: 9mm- High precision, without producing dust, resistant to high temperatures Code H0092 Available Price €1.23
Anti-Static Tweezers ESD 115mm Anti-Static Tweezers ESD 115mm features: - Anti-static tweezers, short straight tip, matt black- Length: 115mm- Width: 9mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0093 Last items in stock Price €1.40
Scalpels, modelling knives - set of 13 blades and 3 handles. A set of modelling scalpels for delicate (plastic fixings), precision work. The set includes 3 handles and 13 very sharp blades in various shapes. Quick and effortless exchange of blades and handles. Code H0555 Available Price €5.78
Pliers Front Cut 110mm Pliers Front Cut 110mm features: - This model is not isolated, please use it without current- The tool has an opening spring for greater comfort- Use to cut soft materials, electronic components, cables, wires, plastic card- Can also be used for welding work Code H0117 ✗ Out-of-Stock Price €3.76
Wire stripping pliers The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AWG. Code H0579 Available Price €3.30
Anti-Static Tweezers ESD 117mm Anti-Static Tweezers ESD 117mm features: - Anti-static tweezers, curved tip, matt black- Length: 117mm- Width: 10mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0094 Available Price €1.48
Spring-loaded pliers for stripping insulation The practical cable stripper from the Rebel Tools range is ideal for stripping the insulation from single or multi-conductor cables. The hardened jaws and blades allow for greater cutting precision and the serrated tip makes it easier to remove the insulation and minimises the risk of damaging the cable. Code H0581 Available Price €3.30
Side Cutting Pliers 110mm Side Cutting Pliers 110mm features: - This model is not isolated, please use it without current- The tool has an opening spring for greater comfort.- Use to cut soft materials, electronic components, cables, plastic card- Can also be used for welding work Code H0115 ✗ Out-of-Stock Price €4.04
ESD Anti-Static Anti-Magnetic Steel Clamps 110mm ESD Anti-Static Anti-Magnetic Steel Clamps 110mm features: - Length: 110mm- Width: 9mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0020 ✗ Out-of-Stock Price €1.23
ESD Anti-Static Anti-Magnetic Steel Tweezers 125mm ESD Anti-Static Anti-Magnetic Steel Tweezers 125mm features: - Length: 125mm- Width: 11mm- ESD pliers- High precisión, without producing dust, resistant to high temperatures Code H0019 ✗ Out-of-Stock Price €1.23
Anti-Static Tweezers ESD 135mm Anti-Static Tweezers ESD 135mm features: - Anti-static tweezers, straight tip, matt black- Length: 135mm- Width: 9mm- High precision, without producing dust, resistant to high temperatures Code H0092 Available Price €1.23