ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth WROOM-32 DEVKIT V1 is an ESP32 processor development board with WiFi and Bluetooth (BLE). It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use, with 2x15 pins. Code W0103 Available Regular price €5.36 -€1.29 Price €4.07
Acrylic box with fan for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features: - clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included. Code RA072 Last items in stock Regular price €3.63 -20% Price €2.90
MPU-6050 Accelerometer Module + Gyroscope 3 Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. MPU-6050 Accelerometer Module + Gyroscope 3 features:- Chip: MPU-6050- Power supply: 3V-5V- Operating current: 5mA- Communication: I2C- 16-bit analog-digital converter on all axes- Gyroscope scales: ± 250, ± 500, ± 1000 and ± 2000 ° / sec (dps) (programmable by the user)- Accelerometer scales: ± 2g, ± 4g, ± 8g and ± 16g (programmable by the user)- Dimensions: 14 x 21 x 1.3mm- Quantity: 1 unit (1 strip of 8 pin + 1 strip of 8 layered pin) Code M0017 ✗ Out-of-Stock Price €3.55
Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - manufactured in EU Code Q0028 Available Price €5.78
DS3231 Precision RTC Real Time Clock Module AVR ARM DS3231 Precision RTC Real Time Clock Module AVR ARM features: - Can be used in projects of Arduino, Raspberry Pi, PIC, AVR- Function compatible with the DS 3231- Power supply voltage: +2.3 V to +5.5 V- Temperature range: -40 ° C to + 85 ° C- Low energy consumption- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation- Two alarm calendar- Interface: I2C Code RA011 Available Price €2.44
Raspberry Official power supply for Raspberry Pi 4, USB-C 5V 3A The official Raspberry 4 power supply with USB-C connector up to 3.1 A in white. Code RA067 ✗ Out-of-Stock Price €7.31
3A DC Converter 4-53V Adjustable LM2596H Step Down Source Wide range of voltages, improved version. Drop module. They will use a multimeter to Check the output voltage and adjust the potentiometer. 3A DC Converter 4-53V Adjustable LM2596H Step Down Source features: - Based on the LM2596HVS-ADJ regulator - Rectification: Asynchronous - Output Voltage: 3v ~ 40v DC (adjustable) - Input Voltage: 4.5v - 53v DC - Max Output Current: 3A (with heat sink) - Ripple in output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2,5% - Operating temperature: -40ºC to + 85ºC - Measurements: 43x 21x 14 mm Code A0018 Available Price €2.31
Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh features: - 9V Varta Industrial 6F22 Battery - High quality, made in Germany - Quantity: 1 unit Code PP021 ✗ Out-of-Stock Price €1.40
Pibow Coupé 4 - Ninja - Case for Raspberry Pi 4 The Pibow Coupé 4 is the ideal slim, hackable and attractive case for your Raspberry Pi 4. Code PI013 Available Price €8.22
Controller Super SNES USB 1.5m Super SNES Classic Controller Super SNES USB Controller is compatible with operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond, arcade emulator, nintendo emulator, Raspberry pi and pi Model 2B, Retro Pi OS The SNES controller works with any emulator you want to download and use (Google SNES emulator, then the same for ROMs e.g. Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.). Code RA049 Last items in stock Price €3.30
Black box with fan for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Code RA097 Last items in stock Price €2.47
Acrylic box with fan for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features: - clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included. Code RA072 Last items in stock Regular price €3.63 -20% Price €2.90
Aluminium Adhesive Heatsink pack 3pcs Kit 3x Aluminium Dissipative Adhesive features: - For Raspberry Pi 2 and Pi 3, B and B + - Heatsink includes thermal sticker - 1x aluminum heatsink for the microprocessor - Dimension: 14x14x5mm - 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator - Dimension 9x9x4mm - Quantity: 3 units Code RA005 Available Price €1.07
Acrylic Box with Fan and Screws for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. Code RA017 Available Regular price €6.20 -30% Price €4.34
Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) features: -Length: 25cm -Quantity: 1 unit -Female connectors at both ends -High quality and good working condition -easy to install and use Code RA008 Available Price €2.44
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €8.22 -€1.30 Price €6.92
Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat gold metal sink: - Dimensions: 12x12x1mm 1 green aluminum sink: - Dimensions: 19x19x8mm Code RA023 Available Price €1.64
Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Color transparent black - Dimension: 89x70x25mm Code RA025 Available Price €1.94
Pibow Coupé 4 - Ninja - Case for Raspberry Pi 4 The Pibow Coupé 4 is the ideal slim, hackable and attractive case for your Raspberry Pi 4. Code PI013 Available Price €8.22
Controller Super SNES USB 1.5m Super SNES Classic Controller Super SNES USB Controller is compatible with operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond, arcade emulator, nintendo emulator, Raspberry pi and pi Model 2B, Retro Pi OS The SNES controller works with any emulator you want to download and use (Google SNES emulator, then the same for ROMs e.g. Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.). Code RA049 Last items in stock Price €3.30
Black box with fan for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Code RA097 Last items in stock Price €2.47
Acrylic box with fan for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features: - clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included. Code RA072 Last items in stock Regular price €3.63 -20% Price €2.90
Aluminium Adhesive Heatsink pack 3pcs Kit 3x Aluminium Dissipative Adhesive features: - For Raspberry Pi 2 and Pi 3, B and B + - Heatsink includes thermal sticker - 1x aluminum heatsink for the microprocessor - Dimension: 14x14x5mm - 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator - Dimension 9x9x4mm - Quantity: 3 units Code RA005 Available Price €1.07
Acrylic Box with Fan and Screws for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. Code RA017 Available Regular price €6.20 -30% Price €4.34
Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) features: -Length: 25cm -Quantity: 1 unit -Female connectors at both ends -High quality and good working condition -easy to install and use Code RA008 Available Price €2.44
Raspberry Pi Pico HAT Expansion Raspberry Pi Pico HAT Expansion is an input/output expansion board designed for Raspberry Pi Pico, which provides a set of 2x20 pin headers in the form of Raspberry Pi header along with a set of 2 x 20 pins. It allows any HAT designed for Raspberry Pi to be connected to Raspberry Pi Pico. Code RA130 Available Regular price €8.22 -€1.30 Price €6.92
Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat gold metal sink: - Dimensions: 12x12x1mm 1 green aluminum sink: - Dimensions: 19x19x8mm Code RA023 Available Price €1.64
Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Color transparent black - Dimension: 89x70x25mm Code RA025 Available Price €1.94