2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino
  • 2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino

RL004

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

OEM
5905323231610
Add to wish list

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:


- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

Data sheet

Voltages
12V
Número de canales
2

Customers who bought this product also bought

CNC Shield Expansion Plate V3 Engraver 3D Printer

CNC shield for arduino works as a controller for CNC type milling machines,
3D printers, laser cutters .
CNC Shield Expansion Plate V3 Engraver 3D Printer features:

  • 4 compatible sockets for use of A4988 stepper motor controllers (PAP), DRV8825, other compatible
  • 4 support axes X, Y, Z, A
  • 2 limit switches for each axis (6 in total)

I0011

Price €2.27

Liquid Flux RF800 100ml Alcohol Based Rosin Welding

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Q0022

Price €4.09

Light Sensor Module BH1750 FVI Arduino and Raspberry compatible

Descripción: Light sensor module to measure light intensity and obtain digital data from it.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
BH1750FVI (Rohm) is used to adjust backlighting of LCD screens and keyboards by manufacturers of mobile phones, digital cameras, navigation and portable gaming devices. Light Sensor Module BH1750 FVI Arduino Raspberry features:
- Chip BH1750FVI
- Supply voltage 3V-5V
- Integrated 16bit AD converter
- Detection range: 0-65535 lx (with an accuracy of 1 lux)
- Interface: II2C
- Low dependence on the light source (eg incandescent lamp, fluorescent lamp, halogen lamp, white LED, sunlight)
- Dimensions 18.4 x 14 mm

M0019

Price €2.47

LCD 1604 Display Screen Blue Backlight 16x4 characters

It consists of a display of 16 characters and 4 rows.
Ideal for projects with Arduino.
You can use it with PIC, AVR, STM32. LCD 1604 Display Screen Blue Backlight 16x4 characters features:
- LCD screen, 16 characters and 4 lines
- 5V power
- Backlit green background, white letters
- Include an adjustable contrast pin

P0150

Price €3.97

Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V

This module equipped with a PCF8591 converter has a low current power supply and includes 8 bit CMOS data acquisition devices.
Your converter has four analog inputs, one analog output and one I2C serial bus interface.
It is supplied in the voltage range 2.5V-6V, analog voltage between the negative potential VSS and positive VDD. The control and data signals are transmitted on the two-wire I2C bi-directional bus to the transformed series.
The intensity of the ambient light can be converted into a digital signal thanks to its integrated photoresistor.
It allows access to eight PCF8591 converters on the same I2C bus without additional equipment. Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V features:
- Supply voltage (between VSS and VDD): 2.5-6VDC

M0133

Price €2.39

Related articles on blog

€2.60
Save €0.50 €2.10

2,10 tax excl.

1
30+ items
Regular price €2.60 Price €2.10

Order until 4pm we will send today
30 days return