L7805 Voltage Regulator 5V 1.5A TO-220 L7805CV Voltage Regulator 5V 1.5A TO-220 features:-Type Output: Fixed-Voltage Output: 5V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0022 Available Price €0.39
Thermistor NTC 10.0K 5% MF52A epoxy resin coating resistor NTC thermistor - with a negative temperature coefficient, i.e. an increase in temperature causes a decrease in resistance. Thermistor NTC 10.0K 5% MF52A epoxy resin coating resistor features:Size: 3mmRated resistance: R25 = 10.0kB value 25/85 = 3950°KRated power: ‰¤ 50mWTolerance:± 5%Operating temperature: from -40°C to +125°C Tinned steel wire 25mm Code D0090 Available Price €0.49
LIPO battery 590mAh 3.7V Lithium polymer battery 3.7 V with the capacity of 590 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit). Battery terminal type-3 wires. Battery voltage-3.7 V Battery capacity- 590 mAh. Code PP056 ✗ Out-of-Stock Price €5.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
USB Cable A to Micro USB B for Arduino Leonardo, Due USB Cable A to Micro USB B Arduino Leonardo, Due features: - Color: Blue or black- Length: 50cm Code K0161 Available Price €1.59
Battery holder 2x 18650 3,7V Serial Battery holder for 18650 batteries connected in series. Code PP057 Available Regular price €2.09 -€0.30 Price €1.79
Prototype Protoboard Breadboard 170 points for Arduino Prototype Protoboard Breadboard 170 points Arduino features:- 170 connections- Base with adhesive to attach it to the work surface- Measurements: 45x35x9mm- Various colors Code PB001 Available Price €1.15
ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth WROOM-32 DEVKIT V1 is an ESP32 processor development board with WiFi and Bluetooth (BLE). It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use, with 2x15 pins. Code W0103 Available Regular price €7.49 -€1.29 Price €6.20
2WD Round Robot Chassis Turtle Car 2x Wheels 3x Plates DIY for Arduino Contents: - 3x Round transparent chassis plate diameter of 14cm - 2x DC 5V gearbox motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 to 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0007 Backorder Price €17.59
2WD Round Car Chassis 2x Ultrasonic Sensor Contents: - 2x Round transparent chassis plate diameter of 14cm - 2x DC 5V gear motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 2x HC-SR04 ultrasonic sensor, distance meter - 2x Holder for HC-SR04 - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 at 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0005 Available Regular price €19.95 -€3.00 Price €16.95
2WD Robot Smart Car Chassis 2x Wheels DIY Ideal for building a car with obstacle detector, light followerIncludes battery compartment for 4 AA batteries and ignition switch. (batteries not included) 2WD Robot Smart Car Chassis 2x Wheels DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Code R0003 Last items in stock Price €11.50
Mclon Kit ProtoShield DIY The mClon kit is ideal for building a car with obstacle detection and light tracking. In addition to the platform, the kit contains the basic essentials for building your first robot including the Arduino Uno compatible board, distance sensors and many other components. Check the complete list in the product description Code R0085 Available Regular price €56.24 -€17.24 Price €39.00
Mclon Car Chassis 2x DIY Wheels Ideal to build a car with an obstacle detector, light follower Characteristic: - Voltage: 3 to 6Vdc - No load speed: 100 RPM to 6Vdc - No load current: 90mA to 3Vdc - 180mA to 6Vdc - Wheel dimensions: diameter 65mm - width 26mm The kit includes: - aluminum platform - 2x wheels and 2x motors - 1x idler wheel - screws Code R0078 Available Price €23.95
2WD Round Robot Chassis Turtle Car 2x Wheels 3x Plates DIY for Arduino Contents: - 3x Round transparent chassis plate diameter of 14cm - 2x DC 5V gearbox motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 to 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0007 Backorder Price €17.59
2WD Round Car Chassis 2x Ultrasonic Sensor Contents: - 2x Round transparent chassis plate diameter of 14cm - 2x DC 5V gear motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 2x HC-SR04 ultrasonic sensor, distance meter - 2x Holder for HC-SR04 - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 at 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0005 Available Regular price €19.95 -€3.00 Price €16.95
2WD Robot Smart Car Chassis 2x Wheels DIY Ideal for building a car with obstacle detector, light followerIncludes battery compartment for 4 AA batteries and ignition switch. (batteries not included) 2WD Robot Smart Car Chassis 2x Wheels DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Code R0003 Last items in stock Price €11.50
Mclon Kit ProtoShield DIY The mClon kit is ideal for building a car with obstacle detection and light tracking. In addition to the platform, the kit contains the basic essentials for building your first robot including the Arduino Uno compatible board, distance sensors and many other components. Check the complete list in the product description Code R0085 Available Regular price €56.24 -€17.24 Price €39.00
Mclon Car Chassis 2x DIY Wheels Ideal to build a car with an obstacle detector, light follower Characteristic: - Voltage: 3 to 6Vdc - No load speed: 100 RPM to 6Vdc - No load current: 90mA to 3Vdc - 180mA to 6Vdc - Wheel dimensions: diameter 65mm - width 26mm The kit includes: - aluminum platform - 2x wheels and 2x motors - 1x idler wheel - screws Code R0078 Available Price €23.95