Acrylic Box with Fan and Screws for Raspberry Pi
  • Acrylic Box with Fan and Screws for Raspberry Pi

Acrylic Box with Fan and Screws for Raspberry Pi

RA017

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. 

Raspberry Pi
Add to wish list

Acrylic Box with Fan and Screws for Raspberry Pi description

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins.

It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating.

Characteristic:

- Fan voltage: 5 VDC
- Box size: 95x65.5x34.5 mm
- Fan size: 30x30x7 mm
- Includes mounting hardware for fan
- Does not include Raspberry Pi

Data sheet

Color
transparente
Material
ABS
Compatibilidad
Raspberry 3

Customers who bought this product also bought

ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics

WIFI transceiver based on the ESP8266 controller.
It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low power mode:

W0003

Price €1.61

Double Side Prototype PCB Board 5x7cm

Double Side Prototype PCB Board 5x7cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

PB019

Price €0.82

40x Female Male 10cm

40x Female Male 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Compatible with 2.54mm male connectors
- High quality and good working conditions
- Easy to install and use

K0106

Price €1.64

Nano plate V3.0 CH340 + Arduino compatible pins

It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per Pin I / O 40 mA
- Flash Memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Frequency: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0026

Price €8.26

Micro Servo 9g SG90

Tower Pro Micro Servo 9g SG90 features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

R0013

Regular price €2.22 -€0.20 Price €2.02
€6.20
Save 30% €4.34

4,34 tax excl.

1
15 items
Regular price €6.20 Price €4.34

Order until 4pm we will send today
30 days return