7 inch TFT LCD 1024x600 for Raspberry Pi controller kit
  • 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit
  • 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit
  • 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit
  • 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit
  • 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit
  • 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit

7 inch TFT LCD 1024x600 for Raspberry Pi controller kit

RA036

HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi.
7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features:

Raspberry Pi
5905323236905
Add to wish list

7 inch TFT LCD 1024x600 for Raspberry Pi controller kit description

HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi.

7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features:



- Supply voltage:
- VCOM: 3.3 - 3.8 V
- AVDD: 9.6 V
- VGH: 18 V
- VGL: -6 V
- Input signal voltage: V (COM): 3.0 - 4.0 V
- High voltage logic input: V (IH): 0.7DVDD - DVDD V
- Low voltage input logic: 0 - 0.3DVDD V
- Screen type: 1024 (R + G + B) * 600 dots
- LCD type: a-SI, Positive, Transmissive
- Display direction: 60 o'clock.
- Backlight: 27 white LEDs.
- Interface: LVDS
- Operating temperature: -10ºC - + 60ºC.
- Active area: 154.08 x 85.92 mm.
- Luminance: 300 Cd / m2.
- External dimensions: 164.9x100x3.5 mm.
Optical

7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features:



- Angle of view: C ‰ ¥ 10, ø = 0ºï ‚°
- Contrast ratio C (θ = 0º, ø = 0º): 600 - 800
- Response time (increase) tr (θ = 0º, ø = 0º): 10 - 20 ms
- Response time (fall) tf (θ = 0º, ø = 0º): 20 - 30 ms
- Direct voltage (VF): 9.6 V a IF = 20mA * 9

- White color


Package includes:
- 1 x 7 inch LCD 1024x600 TFT
- 1 x HDMI controller board (powered by 5-12v)
- 1 x 30cm HDMI cable 
- 1 x DC power cable for controller board
- 1 x LCD holder

Data sheet

Tecnología
LCD TFT
Resolución
1024x600

Customers who bought this product also bought

Passive Buzzer 3-5V Low Level Trigger

When the input port is low, the trio turns on. Then the doorbell comes on and a small red light comes on.
It can be used as the external module for many types of circuits, such as MCUs. Passive Buzzer 3-5V Low Level Trigger features:
- Operating voltage: 3.3-12 VDC
- Current consumption:

M0161

Price €1.12

M3 Nylon Separator set 120pcs

120x M3 Nylon Separator features:
- Hexagonal M3 made of nylon for screws and fastenings on PCB boards, model aircraft, DIY projects
- Can be used in prototyping and robotics projects
- Box dimension: 128x 66x 24mm
- Quantity: 120 units
- Color: white

H0049

Regular price €6.57 -€1.00 Price €5.57

Speed sensor module for Arduino motors

Speed sensor module for Arduino motors features:
- Slot-type optocoupler sensor, slot width: 10 mm.
- The encoder module is a device that can help you in the creation of your robotics and automation project, whether you want to know the speed of a motor or the exact position of it.
- Output Out - Emits a low level when there is no block in the slot, otherwise it produces a high level. The operating mode: - When the sensor is blocked the OUT output is high
- Power supply: 3.3-5V - Current consumption 15 mA max.
- PCB dimensions: 25 x 20 mm

S0129

Price €1.55

HC-SR505 Mini Module Motion Detector Infrared PIR Sensor

Arduino compatible IR motion detector with a detection range of 3 meters.
One sensor electric pyro, which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32.
Characteristic:
- Operating voltage: 4.5V- 20V
- Consumption in idle state:

S0037

Price €2.23

Pro Mini 8MHZ 3.3V Arduino compatible board

Miniaturized compatible version of Arduino Pro Mini.
It has an Atmega328P chip running at 8Mhz with a factory loaded bootloader. It does not include pins so - we can solder only the pins that we need. Pro Mini 8MHZ 3.3V Arduino compatible board features:
- ATmega328P 8MHz chip with external quartz crystal - Auto-reset - micro switch
- Integrated 3.3V regulator
- FLASH 32kB memory
- SRAM 1kB memory
- EEPROM 1Kb memory
- Analog input A0-A7
- 8 PWM channels
- external interruption
- TWI / I2C, UART, SPI interfaces
- Power and status LEDs
- Dimensions: 18x33mm - Weight: 30 grams An adapter is needed to program it

B0017

Regular price €7.40 -€2.00 Price €5.40

Bluetooth Transceiver Module HC-06 Wireless

HC-06 Bluetooth transceiver module with base.
The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.
The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests.
Bluetooth Transceiver Module HC-06 Wireless features:
- Chipset CSR BC417
- 3.5V - 5V power
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20ºC to + 75ºC
- Working current - pairing: 80 mA

W0009

Price €4.45

40x Female-Female Cable 20cm

40x Female-Female Cable 20cm features:
-Length: 20cm
-Quantity: 40 wires
-Dupont female connectors on both ends
-Compatible with 2.54mm male connectors
-High quality and good working condition
-Easy to install and use

K0004

Price €2.06

Related articles on blog

No related article on blog

€38.01
Save €4.00 €34.01

34,01 tax excl.

1
Last 6 items
Regular price €38.01 Price €34.01

Order until 4pm we will send today
30 days return