LED Diode Assortment Kit 40x Red Green Yellow Blue LED Diode Assortment Kit 40x Red Green Yellow Blue features: - Lens color: Red, green, yellow, blue -difused- Size: 5 mm- Operating current: 20mA- Voltage (red) 1.8V-2.3V- Voltage (green) 3.2V-3.4V- Voltage (yellow) 1.8V-2.3V- Voltage (blue) 3.2V-3.4V- Anode (A): Positive (long leg): 28mm- Cathode (K): Negative (shorter leg): 25 mm- Operating temperature: -25ºC/80ºC- Welding temperature: + 260ºC- Quantity: 40 units - 10x red - 10x green - 10x yellow - 10x blue Code P0012 Available Price €0.05
Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features: - Type: red laser diode- Type of laser: cross- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0041 Available Price €3.26
TP4056 Lithium Battery Charger Module 5V Micro USB TP4056 5V Micro USB Lithium Battery Charger Module features: - Based on TP4056ES regulator - Lipo micro USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0100 Available Price €0.82
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €1.73
Soldering Iron Cleaner with Brass Ball Holder Soldering Iron Cleaner with Brass Ball Holder features: - Brass wire cleaner for solder tips with support- It allows to remove the welding residues from the tips- Cleans better and does not cause temperature drops as with sponges- You do not need extra water to clean the tip- Easy and effective cleaning at the tip- Dimensions: diameter 50mm- Support dimensions: 60x68mm Code H0100 Available Price €3.96
NFC RFID Tag Card 13.56 MHz NFC RFID Tag Card 13.56 MHz can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects. Code M0033 Available Price €0.82
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5cm * 6.5cm Material: silica gel (environmental protection material) Code RA046 ✗ Out-of-Stock Price €4.13
Limit Switch with Wheel - 5A 250 Vac - 1 switched - Arduino compatible Limit Switch with Wheel - 5A 250 Vac - 1 switched - Arduino features: -Micro KW12-3 on / off switch -Max Current: 5A -AC voltage: 125-250V -Operating temperature: -40 to 70 degrees C -Quantity: 2 units Code K0018 Available Price €0.49
16x2 LCD screen 1602 Blue welded pins It consists of a 16-character, 2-row display The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 16x2 LCD screen 1602 Blue welded pins features: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19 Code P0154 Available Price €3.26
LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 3.3V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0130 Available Price €2.06
1602 LCD display case Housing for 16x2 character LCD screens. The screen is fixed to the housing with 4 screws. 1602 LCD display case features: - Transparent acrylic shell, - Includes screws, - Dimensions: 90x40x55mm. Code P0149 Available Price €1.15
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €3.71
SparkFun 16x2 SerLCD - RGB on Black 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. black on RGB with a reference of SP028 Code SP027 Last items in stock Regular price €23.13 -€10.00 Price €13.13
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €30.57 -€10.00 Price €20.57
LCD Display Screen Blue Backlight 16x4 1604 It consists of a display of 16 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 16x4 1604 features:- LCD screen, 16 characters and 4 lines- 5V power- Backlit blue background, white letters- Include an adjustable contrast pin Code P0009 Available Price €3.97
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €8.22
20x4 2004 LCD display PCF8574T I2C Backlit Blue - It consists of a 20-character, 4-row display - The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem - Only two pins are needed for communication, SDA and SCL - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 20x4 2004 LCD display PCF8574T I2C Backlit Blue features: - LCD screen, 20 characters and 4 lines - 5V power supply - HD44780 compatible controller Code P0013 Available Price €7.02
Nokia Graphic LCD 84x48 5110 3310 SPI White The display is compatible with the PCD8544 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32 . Characteristic: - LCD screen, 48x84 pixels - Vcc supply 2.7-3.3V - Voltage LED backlight 2.7-3.2V - Compatible PCD8544 controller - SPI interface - PCB dimensions (mm): 45x45 - Includes solder pins - The screen may have small stripes Code P0003 Available Price €2.44
16x2 LCD screen 1602 Blue welded pins It consists of a 16-character, 2-row display The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 16x2 LCD screen 1602 Blue welded pins features: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19 Code P0154 Available Price €3.26
LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 3.3V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0130 Available Price €2.06
1602 LCD display case Housing for 16x2 character LCD screens. The screen is fixed to the housing with 4 screws. 1602 LCD display case features: - Transparent acrylic shell, - Includes screws, - Dimensions: 90x40x55mm. Code P0149 Available Price €1.15
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €3.71
SparkFun 16x2 SerLCD - RGB on Black 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. black on RGB with a reference of SP028 Code SP027 Last items in stock Regular price €23.13 -€10.00 Price €13.13
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €30.57 -€10.00 Price €20.57
LCD Display Screen Blue Backlight 16x4 1604 It consists of a display of 16 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 16x4 1604 features:- LCD screen, 16 characters and 4 lines- 5V power- Backlit blue background, white letters- Include an adjustable contrast pin Code P0009 Available Price €3.97
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €8.22
20x4 2004 LCD display PCF8574T I2C Backlit Blue - It consists of a 20-character, 4-row display - The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem - Only two pins are needed for communication, SDA and SCL - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 20x4 2004 LCD display PCF8574T I2C Backlit Blue features: - LCD screen, 20 characters and 4 lines - 5V power supply - HD44780 compatible controller Code P0013 Available Price €7.02
Nokia Graphic LCD 84x48 5110 3310 SPI White The display is compatible with the PCD8544 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32 . Characteristic: - LCD screen, 48x84 pixels - Vcc supply 2.7-3.3V - Voltage LED backlight 2.7-3.2V - Compatible PCD8544 controller - SPI interface - PCB dimensions (mm): 45x45 - Includes solder pins - The screen may have small stripes Code P0003 Available Price €2.44