DIP Switch - DS-06 Horizontal High Profile 6 Positions

Ceramic Capacitor 470nF (0,1uF) 50v 104 PCB PIC Arduino features:
-Type: ceramic Y5V
-Tolerance: +80% -20%
-Dimensions: diameter 9.5mm, pitch 5.08mm

WIFI transceiver based on the ESP8266 controller.
It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low power mode:

It allows controlling many different types of engines: - Up to 4 bidirectional current motors
- Up to 2 stepper motors (unipolar or bipolar) In addition it is provided with two connectors for servos.                   L293D Motor Drive Shield Expansion Board features:
- Minimum operating voltage: 4.5 V
- Maximum operating voltage: 36 V
- Maximum current: ± 1.2 A (650mA)
- Logic voltage: 5V
- Controller L293D
- Measures: 70x55x20 mm L293D controller consists of 4 H bridges with 650 mA current with thermal protection.
Pull-down resistors keep the motors off during startup.

A set of boards of different sizes, single or double-sided, ideal for testing or manufacturing printed circuit boards. The set contains about 10 boards of different sizes (e.g. 8x12 cm, 8x20 cm, 10x15 cm, 12x20 cm and others) and a total weight of about 0.5 kg.

It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features:
-400 Connections
-Linkable with other Plates
-Base with adhesive to attach it to the work surface
-Measures 82x55x8 mm

It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%

PAM8403 2x3W Digital Amplifier Channel Stereo features:
- Up to 3W in each channel
- Chip: PAM8403
- Power supply: 5V
- Power: 2 outputs of 3 watts each
- Measures: 21x18 mm
- Suitable impedance speakers: 4 Ohm