Bluetooth Transceiver Module HC-06 Wireless
  • Bluetooth Transceiver Module HC-06 Wireless

Bluetooth Transceiver Module HC-06 Wireless

W0009

HC-06 Bluetooth transceiver module with base.
The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.
The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests.
Bluetooth Transceiver Module HC-06 Wireless features:
- Chipset CSR BC417
- 3.5V - 5V power
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20ºC to + 75ºC
- Working current - pairing: 80 mA

OEM
5905323235403
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Bluetooth Transceiver Module HC-06 Wireless description


HC-06 Bluetooth transceiver module with base.
The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.
The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests.

Bluetooth Transceiver Module HC-06 Wireless features:


- Chipset CSR BC417
- 3.5V - 5V power
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20ºC to + 75ºC
- Working current - pairing: 80 mA
- Transmission: 8mA
- Size: 37 x 16m
Helpful Links:
Send / receive information via Bluetooth:
- Wiring of the Arduino HC-06 wireless module with the UNO module
- Wiring of the Arduino HC-06 wireless module with a Sensor Shield V5.0 module
- Wiring of the Arduino HC-06 wireless module with a 9g SG90 servomotor
Realization of a robot manageable by Bluetooth :
- Wiring of the Arduino HC-06 wireless module with the UNO module
- Fix the Arduino HC-06 wireless module in a 2WD DIY Mini Robot Car Kit

Data sheet

Chip
HC-06
Pines
Con pines

Customers who bought this product also bought

ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 55x 35x 16 mm

W0002

Price €7.43

Red Laser Diode 650nm 5mW 6mm 5V

This diode is mainly used for laser toys, all kinds of level meter, instruments, pointer pen, mini LCD projector, laser From remote listeners, remote control burglar alarm light.
Light shots and different display can make the color of the image item a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC
- Mode of point: facula point
- Continuous output
- Operating temperature: -36 ° C - + 65 ° C
- Laser wavelength: 650nm (red)
- Diameter copper head is 6mm
- Power cable length: 75 mm
- Cover material: Brass
- Working life: more than 2000 hours
- Light power: Less than 5mW
- Operating current: Less than 40mA

M0076

Price €0.98

Adhesive Thermal Paste Glue 10g CPU

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Q0006

Price €3.26

Servo 9g SG92r 2.5kg

9g digital servo new version of SG90.
POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque.
It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features:
Weight: 9g
Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v)
Gear type: POM with carbon fiber
Operating speed: 0.1sec /60degree (4.8v)
Temperature range: 0„ƒ_ 55„ƒ
Dead band width:1us
servo wire length: 25 cm
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm

R0079

Price €3.55

Vertical Slide Switch 2P2T 50V 0.5A

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 2P2T 50V 0.5A features:
- Type: 2P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

K0104

Price €0.40

ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics

WIFI transceiver based on the ESP8266 controller.
It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low power mode:

W0003

Price €1.61

NE555P DIP8 Precision Timer Integrated Circuit

NE555P DIP8 Precision Timer Integrated Circuit features:
- Blister: DIP8
- Number of pins: 8
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC
- THRES voltage level: 2.4 - 11.2 VDC
- TRIG voltage level: 1.1 - 5.6 VDC
- RESET voltage level: 0.3 - 1 VDC
- DISCH voltage level change out of state: 0.15 - 0.4 nA
- CONT voltage (open circuit): 2.6 - 11 VDC
- Low level output voltage: 0.1 - 0.4 V
- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA
- THRES current: 30 - 250 nA
- TRIG current: 0.5 - 2 μA
- RESET current: -0.4 - 0.4 μA
- Current change DISCH out of state: 20 - 100 nA

T0061

Price €0.65

Ethernet Shield W5100 Web Server

Shield Ethernet for Arduino boards and compatible based on the Wiznet W5100 chip.
Provides an easy way to connect your module to the local network now internet.
Compatible with the official Arduino Ethernet library.
With this shield you can build a web server.
It can be used as a server or as a client.
It has support for a microSD that can be used to store files for distribution on the network. Ethernet Shield W5100 Web Server features:
- Controller: Wiznet W5100
- Supports protocols TCP and UDP
- Supports up to 4 simultaneous connections
- Compatible with all Arduino versions: UNO, mega 1280/2560
- Dimensions: 74 x 54 x 25mm

W0007

Price €18.14

Related articles on blog

€4.45

4,45 tax excl.

1
Last 4 items
Price €4.45

Order until 4pm we will send today
30 days return