Matrix Membrane Keyboard 4x4 Modulo High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side. Ideal for your Arduino projects, but can also be used with other microcontrollers. Matrix Membrane Keyboard 4x4 Modulo features: - Rating circuit, Max: DC 35V 100 mA - Cable length: 85 mm - Dupont 8 pin connector - Specific insulation: 100 M Ohm, 100V - Useful life: + 1 million uses - Contact parting: Code M0025 Available Price €1.48
GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the start 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna (not included ): 18x18 mm - Size: 22x30x13 mm Code M0070 Last items in stock Price €12.31
Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use features: Code PP049 Available Price €4.95
ESD Anti-Static Anti-Magnetic Steel Clamps 110mm ESD Anti-Static Anti-Magnetic Steel Clamps 110mm features: - Length: 110mm- Width: 9mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0020 Available Price €1.23
Soldering Station 48W Soldering Station 48W features: - Heating element for soldering iron: 48W- Temperature: 150 ° C - 480 ° C- Power: 220-240Vac- Temperature controlled soldering station 48W,- Adjust the desired temperature of the soldering iron with the adjustment knob,- The color-coded areas are similar to the following temperatures:- Yellow approx. 150 „ƒ- Orange approx.> 150 to 270 „ƒ- Red approx.> 270 to 480 „ƒ- Wait about 2-3 minutes until the solder tip reaches the set temperature. Code H0018 Available Price €18.14
PLA Filamento 1.75mm 0.85kg Navy blue color azul marino Premium Bobina para Impresora 3D Code I0409 Backorder Price €14.45
LED Diode Assortment Kit 50x Red Green Yellow Blue White LED Diode Assortment Kit 50x Red Green Yellow Blue White features: - Lens color: Red, green, yellow, blue - diffuse, light white- Size: 5 mm- Operating current: 20mA- Voltage (red) 1.8V-2.3V- Voltage (green) 3.2V-3.4V- Voltage (yellow) 1.8V-2.3V- Voltage (blue) 3.0V-3.2V- Voltage (white) 3.2V - 3.4V- Anode (A): Positive (long leg): 17mm- Cathode (K): Negative (shorter leg): 15 mm- Operating temperature: -25ºC / 80ºC- Welding temperature: + 260ºC- Quantity: - 50 units - 10x red - 10x green - 10x yellow - 10x blue - 10x white Code P0007 Available Price €1.64
A3967 DC Motor PAP Driver Stepper - Easy driver A3967 controller, double H-bridge controller driver. Allows to control up to 2 DC motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. A3967 DC Motor PAP Driver Stepper - Easy driver features: - Minimum operating voltage: 7.00 V - Voltage maximum operating: 30 V Code R0049 Available Price €2.44
40x Male to male cables 20cm Characteristic: -Length: 20cm -Quantity: 40 cables -Mono Dupont connectors on both ends -Compatible with 2.54mm female connectors -High quality and good working condition -Easy to install and use Code K0006 Available Price €2.06
10x Male-Male Cables 20cm Jumpers Dupont 2,54 10x Male-Male Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have male header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0007 Available Price €1.40
10x Female-Male Cables 20cm Jumpers Dupont 10x Female-Male Cables 20cm Jumpers Dupont features: -Length: 20cm-Quantity: 10 cables-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0009 Available Price €1.40
120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54 for Arduino 120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:- Length: 20cm- Quantity: 120 cables- Female-Female 40 units- Male-Male 40 units- Female-Male 40 units Code K0103 Available Regular price €6.17 -€1.22 Price €4.95
9pins male D-Sub cable to female IDC10 9-pin male d-sub to female IDC 10 cable. Code K0253 ✗ Out-of-Stock Price €2.19
120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54 for Arduino 120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:- Length: 20cm- Quantity: 120 cables- Female-Female 40 units- Male-Male 40 units- Female-Male 40 units Code K0114 Available Regular price €4.93 -€0.81 Price €4.12
40x Female Male 10cm 40x Female Male 10cm features: - Length: 10cm - Quantity: 40 cables - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K0106 Available Price €1.64
Flat Cable GPIO 40 Pins M/F Flat Cable GPIO 40 Pins M/F features: - For Raspberry Pi 2 and Pi 3, B and B + - Total length 20cm - Quantity: 1 unit Code RA007 Available Price €2.36
Female to Female Cable 3 Pins 3 Colors Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers. Code K0091 Available Price €0.79
JST Female 15cm AWG 18 This connector can be used in most modeling projects. It is ideal for small Lipo and NiMH connection. JST Female 15cm AWG 18 features: - Type: female JST connector for RC BEC Lipo - Color: - Black: low power polarity - Red: high power polarity - Length: 20cm Code K0154 Available Price €0.90
40x Male to male cables 20cm Characteristic: -Length: 20cm -Quantity: 40 cables -Mono Dupont connectors on both ends -Compatible with 2.54mm female connectors -High quality and good working condition -Easy to install and use Code K0006 Available Price €2.06
10x Male-Male Cables 20cm Jumpers Dupont 2,54 10x Male-Male Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have male header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0007 Available Price €1.40
10x Female-Male Cables 20cm Jumpers Dupont 10x Female-Male Cables 20cm Jumpers Dupont features: -Length: 20cm-Quantity: 10 cables-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0009 Available Price €1.40
120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54 for Arduino 120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:- Length: 20cm- Quantity: 120 cables- Female-Female 40 units- Male-Male 40 units- Female-Male 40 units Code K0103 Available Regular price €6.17 -€1.22 Price €4.95
9pins male D-Sub cable to female IDC10 9-pin male d-sub to female IDC 10 cable. Code K0253 ✗ Out-of-Stock Price €2.19
120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54 for Arduino 120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:- Length: 20cm- Quantity: 120 cables- Female-Female 40 units- Male-Male 40 units- Female-Male 40 units Code K0114 Available Regular price €4.93 -€0.81 Price €4.12
40x Female Male 10cm 40x Female Male 10cm features: - Length: 10cm - Quantity: 40 cables - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K0106 Available Price €1.64
Flat Cable GPIO 40 Pins M/F Flat Cable GPIO 40 Pins M/F features: - For Raspberry Pi 2 and Pi 3, B and B + - Total length 20cm - Quantity: 1 unit Code RA007 Available Price €2.36
Female to Female Cable 3 Pins 3 Colors Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers. Code K0091 Available Price €0.79
JST Female 15cm AWG 18 This connector can be used in most modeling projects. It is ideal for small Lipo and NiMH connection. JST Female 15cm AWG 18 features: - Type: female JST connector for RC BEC Lipo - Color: - Black: low power polarity - Red: high power polarity - Length: 20cm Code K0154 Available Price €0.90